相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3DP Printing of Oral Solid Formulations: A Systematic Review
Chiara R. M. Brambilla et al.
PHARMACEUTICS (2021)
Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages
Di Chen et al.
AAPS PHARMSCITECH (2020)
Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing
Pengchong Xu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures
Beatriz C. Pereira et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen
Siddhant Palekar et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D printed oral theophylline doses with innovative 'radiator-like' design: Impact of polyethylene oxide (PEO) molecular weight
Abdullah Isreb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Preparation of Filaments and the 3D Printing of Dronedarone HCl Tablets for Treating Cardiac Arrhythmias
Gordana Matijasic et al.
AAPS PHARMSCITECH (2019)
Design and 3D printing of multi-compartmental PVA capsules for drug delivery
Gordana Matijasic et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Development of a hot-melt extrusion (HME) process to produce drug loaded Affinisol™ 15LV filaments for fused filament fabrication (FFF) 3D printing
Elke Prasad et al.
ADDITIVE MANUFACTURING (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Controlled Release of 5-Fluorouracil from Alginate Beads Encapsulated in 3D Printed pH-Responsive Solid Dosage Forms
Christos I. Gioumouxouzis et al.
AAPS PHARMSCITECH (2018)
Reshaping drug development using 3D printing
Atheer Awad et al.
DRUG DISCOVERY TODAY (2018)
Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
Basel Arafat et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
Christos I. Gioumouxouzis et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release
Yan Yang et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D extrusion printing of high drug loading immediate release paracetamol tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Multi-purposable filaments of HPMC for 3D printing of medications with tailored drug release and timed-absorption
Hossam Kadry et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Gayathri Kollamaram et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed medicines: A new branch of digital healthcare
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Muzna Sadia et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D Printing in Pharmaceutical and Medical Applications - Recent Achievements and Challenges
Witold Jamroz et al.
PHARMACEUTICAL RESEARCH (2018)
Immediate Release 3D-Printed Tablets Produced Via Fused Deposition Modeling of a Thermo-Sensitive Drug
Wiebke Kempin et al.
PHARMACEUTICAL RESEARCH (2018)
3D printed capsules for quantitative regional absorption studies in the GI tract
Derrick Smith et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
Deck Khong Tan et al.
PHARMACEUTICS (2018)
Application of Fused Deposition Modelling (FDM) Method of 3D Printing in Drug Delivery
Jingjunjiao Long et al.
CURRENT PHARMACEUTICAL DESIGN (2017)
3D printed drug delivery devices: perspectives and technical challenges
Mirja Palo et al.
EXPERT REVIEW OF MEDICAL DEVICES (2017)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
A. Maroni et al.
JOURNAL OF CONTROLLED RELEASE (2017)
3D printed oral solid dosage forms containing hydrochlorothiazide for controlled drug delivery
Christos I. Gioumouxouzis et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2017)
Circadian mechanisms of 24-hour blood pressure regulation and patterning
Michael H. Smolensky et al.
SLEEP MEDICINE REVIEWS (2017)
Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation
Jiaxiang Zhang et al.
CARBOHYDRATE POLYMERS (2017)
Investigation of Thermal and Viscoelastic Properties of Polymers Relevant to Hot Melt Extrusion, IV: Affinisol™ HPMC HME Polymers
Simerdeep Singh Gupta et al.
AAPS PHARMSCITECH (2016)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Alvaro Goyanes et al.
JOURNAL OF CONTROLLED RELEASE (2016)
Development and optimization of press coated tablets of release engineered valsartan for pulsatile delivery
Sunny Shah et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Katarzyna Pietrzak et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Patented pulsatile drug delivery technologies for chronotherapy
Sumit S. Patil et al.
EXPERT OPINION ON THERAPEUTIC PATENTS (2014)
Release characteristics and in vitro-in vivo correlation of pulsatile pattern for a pulsatile drug delivery system activated by membrane rupture via osmotic pressure and swelling
Hong-Liang Lin et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
分享论文
