相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression
Matruprasad Rout et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2021)
A verified solution of friction factor in compression test based on its sample's shape changes
S. Khoddam et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
A new analytical method for determination of the flow curve for high-strength sheet steels using the plane strain compression test
Charles Chermette et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Flow-Stress Model of 300M Steel for Multi-Pass Compression
Rongchuang Chen et al.
METALS (2020)
Deformation inhomogeneity due to sample-anvil friction in cylindrical compression test
Xian-jue Ye et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
A novel inhomogeneous deformation field model for cylindrical specimens for unconfined compression testing
Rafael Gomez Consarnau et al.
POLYMER TESTING (2019)
Research on high temperature deformation behavior of low carbon steel based on processing map
Hu Dao-chun et al.
ADVANCES IN MECHANICAL ENGINEERING (2019)
Evaluation of barreling and friction in uniaxial compression test: A kinematic analysis
Soheil Solhjoo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Deformation under combined compression and shear: a new kinematic solution
Shahin Khoddam
JOURNAL OF MATERIALS SCIENCE (2019)
Flow curves up to high strains considering load reversal and damage
Oliver Hering et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Advancing mechanics of Barrelling Compression Test
S. Khoddam et al.
MECHANICS OF MATERIALS (2018)
Friction assessment in uniaxial compression test: A new evaluation method based on local bulge profile
X. G. Fan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Inverse finite element modeling of the barreling effect on experimental stress-strain curve for high temperature steel compression test
X. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Modeling Static and Dynamic Kinetics of Microstructural Evolution in Hot Deformation of Fe-0.15C-0.2Si-1.4Mn-0.03Nb Alloy
Yi Meng et al.
STEEL RESEARCH INTERNATIONAL (2017)
A New Horizon for Barreling Compression Test: Exponential Profile Modeling
Mehdi Fardi et al.
ADVANCED ENGINEERING MATERIALS (2017)
Inner Architecture of Bonded Splats under Combined High Pressure and Shear
Shahin Khoddam et al.
ADVANCED ENGINEERING MATERIALS (2016)
Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus
Alireza Bagher Shemirani et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Constitutive modeling for investigating the effects of friction on rheological behavior during hot deformation
W. Q. Li et al.
MATERIALS & DESIGN (2016)
Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model
Y. C. Lin et al.
MATERIALS & DESIGN (2016)
Computational inverse analysis of static recrystallization kinetics
S. Khoddam et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Shear blanking test of a mechanically bonded aluminum/copper composite using experimental and numerical methods
Thaneshan Sapanathan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The need to revise the current methods to measure and assess static recrystallization behavior
S. Khoddam et al.
MECHANICS OF MATERIALS (2015)
A comprehensive method to identify the kinetics of static recrystallization using the hot torsion test results with an inverse solution
S. Khoddam et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2014)
Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31
Babak Kondori et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Modeling Static and Dynamic Kinetics of Microstructure Evolution in Type 316 Stainless Steel
Eduardo Dupin et al.
STEEL RESEARCH INTERNATIONAL (2014)
Multiple pass axi-symmetrical forward spiral extrusion of interstitial-free (IF) steel
A. Farhoumand et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
A Friction Evaluation Method Based on Barrel Compression Test
Zhehe Yao et al.
TRIBOLOGY LETTERS (2013)
Misalignment effect in the split Hopkinson pressure bar technique
Muhammad A. Kariem et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)
Progress in thermomechanical control of steel plates and their commercialization
Kiyoshi Nishioka et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2012)
From trial and error to computer modelling of thermomechanical processing
C. M. Sellars
IRONMAKING & STEELMAKING (2011)
An inverse thermal-mechanical analysis of the hot torsion test for calibrating the constitutive parameters
S. Khoddam et al.
MATERIALS & DESIGN (2011)
A note on Barrel Compression Test: A method for evaluation of friction
Soheil Solhjoo
COMPUTATIONAL MATERIALS SCIENCE (2010)
A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing
C. J. Bennett et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
History of plasticity and metal forming analysis
Kozo Osakada
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Some Fundamental Issues in Dynamic Compression and Tension Tests of Rocks Using Split Hopkinson Pressure Bar
Feng Dai et al.
ROCK MECHANICS AND ROCK ENGINEERING (2010)
Correcting the Stress-Strain Curve in Hot Compression Process to High Strain Level
Y. P. Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Effect of changing strain rate on flow stress during hot deformation of Type 316L stainless steel
M. F. Abbod et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Formularization of softening fractions and related kinetics for static recrystallization using inverse analysis of double compression test
Akira Yanagida et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Material characterization at high strain rate by Hopkinson bar tests and finite element optimization
M. Sasso et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
A. Dehghan-Manshadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Frictionless compression testing using load-applying platens made from porous graphite aerostatic bearings
T El-Aguizy et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2005)
The static, dynamic metadynamic recrystallisation of a medium carbon steel
SH Zahiri et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Conversion of the hot torsion test results into flow curve with multiple regimes of hardening
S Khoddam et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
A new model for the elastoplastic characterization and the stress-strain determination on the necking section of a tensile specimen
G Mirone
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
A new method for evaluation of friction in bulk metal forming
R Ebrahimi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Bonding mechanism in cold gas spraying
H Assadi et al.
ACTA MATERIALIA (2003)
Flow curve determination for metal under dynamic recrystallization using inverse analysis
A Yanagida et al.
MATERIALS TRANSACTIONS (2003)
A study for the constitutive equation of carbon steel subjected to large strains, high temperatures and high strain rates
Y Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Constitutive analysis in hot working
HJ McQueen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Modelling the hot plane strain compression test Part 2 - Effect of friction and specimen geometry on spread
MS Mirza et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Axisymmetric compression test and hot working properties of alloys
RW Evans et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Friction-reducing contact area expansion in upsetting
X Tan
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2001)
Development of constitutive equations for modelling of hot rolling
SB Davenport et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
On the nonuniform deformation of the cylinder compression test
FK Chen et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2000)