相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN2-Assisted Sustainable Machining of Ti-6Al-4V Alloy
Aqib Mashood Khan et al.
METALS (2021)
Preparation, characterization, tribological and lubrication performances of Eu doped CaWO4 nanoparticle as anti-wear additive in water-soluble fluid for steel strip during hot rolling
Sang Xiong et al.
APPLIED SURFACE SCIENCE (2021)
Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel
Archana Thakur et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)
A study of viscosity and thermal conductivity of vegetable oils as base cutting fluids for minimum quantity lubrication machining of difficult-to-cut metals
Anthony Chukwujekwu Okafor et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling
Xiufang Bai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations
Zhenjing Duan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Evaluation of size effect and improvement in surface characteristics using sunflower oil-based MQL for sustainable micro-endmilling of Inconel 718
K. N. Anand et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Nonedible vegetable oil-based cutting fluids for machining processes - a review
Rahul Katna et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel
Anshuman Das et al.
MEASUREMENT (2020)
Comparative evaluation of soybean oil-based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718
Anthony Chukwujekwu Okafor et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of TI-6AL-4V-ELI
Harpinder Singh et al.
TRIBOLOGY INTERNATIONAL (2020)
Application of conventional and hybrid nanofluids in different machining processes: A critical review
Mohammad Hemmat Esfe et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)
Sustainability-based performance evaluation of hybrid nanofluid assisted machining
Aqib Mashood Khan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel
Aqib Mashood Khan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Refiningand Sulfurization of Oil from Black Soldier Fly and Its Application as Biodegradable Lubricant Additive
Jing Xiong et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2020)
Superior lubrication performance of MoS2-Al2O3 composite nanofluid in strips hot rolling
Jiaqi He et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations
Anuj Kumar Sharma et al.
FRICTION (2019)
Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti-6Al-4V
Muhammad Jamil et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Evaluation of tool life and workpiece surface roughness in turning of AISI D6 hardened steel using PCBN tools and minimum quantity of lubricant (MQL) applied at different directions
Miguel Mandu Bonfa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique
Amiril Sahab Abdul Sani et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants
Teng Gao et al.
TRIBOLOGY INTERNATIONAL (2019)
Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI
Harpinder Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions
Min Yang et al.
CERAMICS INTERNATIONAL (2019)
Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids
Kishor Kumar Gajrani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
End milling of AISI 304 steel using Minimum Quantity Lubrication
M. Naresh Babu et al.
MEASUREMENT (2019)
Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant
Xin Cui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Specific Energy and G ratio of Grinding Cemented Carbide under Different Cooling and Lubrication Conditions
Wentao Wu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of Al2O3 and palm oil-mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules-based FIS model in eco-benign milling
Binayak Sen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experiment evaluation of grinding properties under Al2O3 nanofluids in minimum quantity lubrication
Roshan Lal Virdi et al.
MATERIALS RESEARCH EXPRESS (2019)
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
Zafar Said et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Performance and evaluation of MoS2 based machining using PVD-TiAlN coated tool
Viswanathan Sivaraman et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)
Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids
Anil Kumar et al.
CERAMICS INTERNATIONAL (2019)
Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy
Munish Kumar Gupta et al.
MATERIALS (2019)
Influence of minimum quantity lubrication on surface integrity of ground hardened H13 hot die steel
A. S. Awale et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Process parameter optimization and experimental evaluation for nanofluid MQL in grinding Ti-6Al-4V based on grey relational analysis
Guotao Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension
Shuming Guo et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
Tao Lv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel
Qingan Yin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Prediction of temperature distribution over cutting tool with alumina-MWCNT hybrid nanofluid using computational fluid dynamics (CFD) analysis
Anuj Kumar Sharma et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
Erween Abd Rahim et al.
MEASUREMENT (2018)
Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions
G. M. Krolczyk et al.
MEASUREMENT (2018)
A review on the chemistry, production, and technological potential of bio-based lubricants
N. A. Zainal et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
N. Talib et al.
TRIBOLOGY INTERNATIONAL (2018)
Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining
Songmei Yuan et al.
TRIBOLOGY LETTERS (2018)
Preparation, characterization and lubrication performances of graphene oxide-TiO2 nanofluid in rolling strips
Shaonan Du et al.
CARBON (2018)
MQL milling of TC4 alloy by dispersing graphene into vegetable oil-based cutting fluid
Ming Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti-6Al-4V
Qingan Yin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
An experimental investigation on the effects of minimum quantity nano lubricant application in grinding process of Tungsten carbide
S. F. Hosseini et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Environment Friendly Machining of Inconel 625 under Nano-Fluid Minimum Quantity Lubrication (NMQL)
Talwinder Singh et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
Benkai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Experimental research on microscale grinding temperature under different nanoparticle jet minimum quantity cooling
Min Yang et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Numerical and experimental research on the grinding temperature of minimum quantity lubrication cooling of different workpiece materials using vegetable oil-based nanofluids
Benkai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process
N. Talib et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Experimental investigation into lubrication properties and mechanism of vegetable-based CuO nanofluid in MQL grinding
Mohammadreza Shabgard et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
Benkai Li et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Lubri-cooling and tribological behavior of vegetable oils during milling of AISI 1045 steel focusing on sustainable manufacturing
Antonio Santos Araujo Junior et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
Shuming Guo et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids
Yaogang Wang et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning
Rabesh Kumar Singh et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Lubricating property of MQL grinding of Al2O3/SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation
Xianpeng Zhang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
Dongzhou Jia et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Sustainable production framework for cement manufacturing firms: A behavioural perspective
Zongwei Luo et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Tribological properties of ZnO and WS2 nanofluids using different surfactants
Jingxuan Guo et al.
WEAR (2017)
Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment
Yaogang Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel
Anuj Kumar Sharma et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
The Effects of the size of Al2O3 Particles in Nanolubricant with Added SDBS on Surface Roughness and Tool Wear during Turning of Mild Steel
M. A. M. late Ali et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Research on microscale skull grinding temperature field under different cooling conditions
Min Yang et al.
APPLIED THERMAL ENGINEERING (2017)
A comprehensive study of effect of concentration, particle size and particle shape on thermal conductivity of titania/water based nanofluid
P. B. Maheshwary et al.
APPLIED THERMAL ENGINEERING (2017)
Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
Kyung-Hee Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
Improvement of useful flow rate of grinding fluid with simulation schemes
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
Yu Su et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Experimental research on the influence of the jet parameters of minimum quantity lubrication on the lubricating property of Ni-based alloy grinding
Dongzhou Jia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Experimental evaluation of nano-molybdenum disulphide and nano-boric acid suspensions in vegetable oils as prospective cutting fluids during turning of AISI 1040 steel
R. Padmini et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2016)
Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil
Li Benkai et al.
CHINESE JOURNAL OF AERONAUTICS (2016)
Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding
Xianpeng Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil
Yanbin Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
Yaogang Wang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy
Yanbin Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
An Investigation on the Tribological Performances of the SiO2/MoS2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts
Hongmei Xie et al.
NANOSCALE RESEARCH LETTERS (2016)
Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: A review
M. S. Najiha et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
Yaogang Wang et al.
TRIBOLOGY INTERNATIONAL (2016)
Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
R. Padmini et al.
TRIBOLOGY INTERNATIONAL (2016)
An Investigation on the Tribological Performances of the SiO2/MoS2 Hybrid Nanofluids for Magnesium Alloy-Steel Contacts
Hongmei Xie et al.
NANOSCALE RESEARCH LETTERS (2016)
The effect of tribology behavior on machining performances when using bio-based lubricant as a sustainable metalworking fluid
N. Talib et al.
13TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - DECOUPLING GROWTH FROM RESOURCE USE (2016)
Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding
Zhang Dongkun et al.
CHINESE JOURNAL OF AERONAUTICS (2015)
Measurements of the contact angle of nanofluids and development of a new correlation
Jabez Chinnam et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)
Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding
Dongkun Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Assessment of spray quality from an external mix nozzle and its impact on SQL grinding performance
S. Shiva Sai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Experimental evaluation on tribological properties of nano-particle jet MQL grinding
Changhe Li et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2015)
Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
Yanbin Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2015)
The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites
Cong Mao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Oxidation and low temperature stability of polymerized soybean oil-based lubricants
Zengshe Liu et al.
THERMOCHIMICA ACTA (2015)
Performance Evaluation of Chemically Modified Crude Jatropha Oil as a Bio-based Metalworking Fluids for Machining Process
N. Talib et al.
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS (2015)
Flow visualization and characterization for optimized MQL machining of composites
Y. Iskandar et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding
Dongzhou Jia et al.
JOURNAL OF NANOPARTICLE RESEARCH (2014)
Comparative study of the oxidative and thermal stability of vegetable oils to be used as lubricant bases
Jose Roberto dos Santos Politi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Investigation on the Effect of Nanofluid Parameters on MQL Grinding
Cong Mao et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage
Manila Chieruzzi et al.
NANOSCALE RESEARCH LETTERS (2013)
On the flow characteristics of nanofluids by experimental approach and molecular dynamics simulation
Wenzheng Cui et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
A. Shokrani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Tribological Effects of BN and MoS2 Nanoparticles Added to Polyalphaolefin Oil in Piston Skirt/Cylinder Liner Tests
Nicholaos G. Demas et al.
TRIBOLOGY LETTERS (2012)
Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants
Parash Kalita et al.
Journal of Manufacturing Processes (2012)
A tribological study of vegetable oil enhanced by nano-platelets and implication in MQL machining
Trung Kien Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
A Heat Transfer Model Based on Finite Difference Method for Grinding
Bin Shen et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Tribological Properties of Lubricating Oil-Based Nanofluids with Metal/Carbon Nanoparticles
Cheol Choi et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2011)
AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION
Erween A. Rahim et al.
MACHINING SCIENCE AND TECHNOLOGY (2011)
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
E. A. Rahim et al.
TRIBOLOGY INTERNATIONAL (2011)
Dispersion of carbon nanotubes with SDS surfactants: a study from a binding energy perspective
Wen Hui Duan et al.
CHEMICAL SCIENCE (2011)
Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
P. Vamsi Krishna et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique
M. H. Sadeghi et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication-MQL grinding
T. Tawakoli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
M. M. A. Khan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Friction and wear behavior of thioether hydroxy vegetable oil
Brajendra K. Sharma et al.
TRIBOLOGY INTERNATIONAL (2009)
Understanding the Role of Nanoparticles in Nano-oil Lubrication
Kwangho Lee et al.
TRIBOLOGY LETTERS (2009)
A REVIEW ON NANOFLUIDS - PART I: THEORETICAL AND NUMERICAL INVESTIGATIONS
Xiang-Qi Wang et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2008)
Optimisation of fluid application in grinding
M. N. Morgan et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Hard turning of an alloy steel on a machine tool with a polymer concrete bed
C. Bruni et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Application of Nanofluids in Minimum Quantity Lubrication Grinding
Bin Shen et al.
TRIBOLOGY TRANSACTIONS (2008)
High-speed grooving with applying MQL
Toshiyuki Obikawa et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B
C. Bruni et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Increasing formability in sheet metal stamping operations using environmentally friendly lubricants
M. Lovell et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy
F Itoigawa et al.
WEAR (2006)
Effect of oil mist on tool temperature in cutting
T Ueda et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2006)
Boundary lubrication performance of free fatty acids in sunflower oil
NJ Fox et al.
TRIBOLOGY LETTERS (2004)
Pool boiling characteristics of nano-fluids
SK Das et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)
Minimal lubrication machining of aluminium alloys
JF Kelly et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
The effects of cutting fluid application methods on the grinding process
S Ebbrell et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
分享论文
