相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。High-strength and high-conductivity in situ Cu-TiB2 nanocomposites
Shuaihang Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Multiscale analysis of friction behavior at fretting interfaces
Zhinan Zhang et al.
FRICTION (2021)
High diffusivity pathways govern massively enhanced oxidation during tribological sliding
Julia S. Rau et al.
ACTA MATERIALIA (2021)
Biodegradable Zn-3Mg-0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications
Xian Tong et al.
ACTA BIOMATERIALIA (2021)
Effects of Ti interlayer on adhesion property of DLC films: A first principle study
Keliang Wang et al.
DIAMOND AND RELATED MATERIALS (2021)
TiB2 nanoparticles-regulated oxidation behavior in aluminum alloy 7075
Shuaihang Pan et al.
CORROSION SCIENCE (2021)
Research methods of contact electrification: Theoretical simulation and experiment
Zhinan Zhang et al.
NANO ENERGY (2021)
A molecular dynamics study on the tribological behavior of molybdenum disulfide with grain boundary defects during scratching processes
Boyu Wei et al.
FRICTION (2021)
A novel process for manufacturing copper with size-controlled in-situ tungsten nanoparticles by casting
Gongcheng Yao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties
C. Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Mo-enhanced chemical stability of TiC nanoparticles in molten Al
Shuaihang Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Self-healing WS2 tribofilms: An in-situ appraisal of mechanisms
Huatang Cao et al.
SCRIPTA MATERIALIA (2021)
Revealing tribo-oxidation mechanisms of the copper-WC system under high tribological loading
X. Chen et al.
SCRIPTA MATERIALIA (2021)
Effect of T6 treatment on additively-manufactured AlSi10Mg sliding against ceramic and steel
Wen Hao Kan et al.
WEAR (2021)
Non-negligible corrosion process in a novel sulfur-based energy storage system
Kaiyuan Jin et al.
JOURNAL OF POWER SOURCES (2021)
Size Control of In Situ Synthesized TiB2 Particles in Molten Aluminum
Jie Yuan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
Nanoparticles Enabled Mechanism for Hot Cracking Elimination in Aluminum Alloys
Maximilian Sokoluk et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
Wear behaviors of 5 wt % SiO2?Ni60 coatings deposited by atmospheric plasma spraying under dry and water-lubrication sliding conditions
Chao Zhang et al.
WEAR (2021)
Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for aerospace applications
A. Kalaiyarasan et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2021)
Interfacial thermal conductance of in situ aluminum-matrix nanocomposites
Shuaihang Pan et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Nanoparticle promoted solution treatment by reducing segregation in AA7034
Jie Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Reactive wear protection through strong and deformable oxide nanocomposite surfaces
Chang Liu et al.
NATURE COMMUNICATIONS (2021)
Wettability in Metal Matrix Composites
Massoud Malaki et al.
METALS (2021)
Tribological characteristics of AA8090-WC-ZrC metal matrix composites prepared by stir casting process for aerospace applications
A. Kalaiyarasan et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2021)
Design guidelines for Al-12%Si latent heat storage encapsulations to optimize performance and mitigate degradation
Selmar Binder et al.
APPLIED SURFACE SCIENCE (2020)
Correlation between micro/nano-structure, mechanical and tribological properties of copper-zirconia nanocomposites
M. S. Abd-Elwahed et al.
CERAMICS INTERNATIONAL (2020)
Structural, mechanical and tribological properties of Cu-ZrO2/GNPs hybrid nanocomposites
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2020)
Effect of Al2O3 particles on mechanical and tribological properties of Al-Mg dual-matrix nanocomposites
M. A. Eltaher et al.
CERAMICS INTERNATIONAL (2020)
Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder
Xinliang Xie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
3D Time-Resolved Observations of Fatigue Crack Initiation and Growth from Corrosion Pits in Al 7XXX Alloys Using In Situ Synchrotron X-ray Tomography
Arun Sundar Sundaram Singaravelu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Dry sliding friction and wear characterization of in situ TiC/Al-Cu3.7 -Mg1.3 nanocomposites with nacre-like structures
Lei Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite
Yu Ma et al.
ACTA MATERIALIA (2020)
Sulfur heat transfer behavior in vertically-oriented and nonuniformly-heated isochoric thermal energy storage systems
Kaiyuan Jin et al.
APPLIED ENERGY (2020)
Effect of electron concentration on electrical conductivity in in situ Al-TiB2 nanocomposites
Shuaihang Pan et al.
APPLIED PHYSICS LETTERS (2020)
Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy
Run Geng et al.
CORROSION SCIENCE (2020)
Tribological Performance of Cu-rGO-MoS2 Nanocomposites Under Dry Sliding
Hemant Nautiyal et al.
TRIBOLOGY LETTERS (2020)
Mechanical, tribological and electrical properties of ZrB2 reinforced Cu processed via milling and high-pressure hot pressing
Mahammad Ali Shaik et al.
CERAMICS INTERNATIONAL (2020)
Effect of humidity on tribological properties and electrification performance of sliding-mode triboelectric nanogenerator
Yanqiang Hu et al.
NANO ENERGY (2020)
Oleic-acid enhanced triboelectric nanogenerator with high output performance and wear resistance
Jianjun Zhang et al.
NANO ENERGY (2020)
The effect of the double-action pressure on the physical, mechanical and tribology properties of Mg-WO3 nanocomposites
Kaveh Rahmani et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites
Xiang Zhang et al.
NATURE COMMUNICATIONS (2020)
Superlubricity of metal -metal interface enabled by graphene and MoWS 4 nanosheets
Bangzheng Jiang et al.
APPLIED SURFACE SCIENCE (2020)
Effects of friction stir processing parameters on the wear resistance and mechanical properties of fabricated metal matrix nanocomposites (MMNCs) surface
Waheed S. AbuShanab et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Mechanical and tribological properties of nanocomposites incorporated with two-dimensional materials
Zhengjia Ji et al.
FRICTION (2020)
The effect of Al2O3 content on tribology and corrosion properties of Mg-Al2O3 nanocomposites produced by single and double-action press
K. Rahmani et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Highly Ductile Zn-2Fe-WC Nanocomposite as Biodegradable Material
Zeyi Guan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Welding and additive manufacturing with nanoparticle-enhanced aluminum 7075 wire
Daniel Oropeza et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Nanoglass-Nanocrystal Composite-a Novel Material Class for Enhanced Strength-Plasticity Synergy
Shyam Katnagallu et al.
SMALL (2020)
The tribological behavior of hybrid aluminum alloy nanocomposites at High temperature: Role of nanoparticles
P. Paulraj et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Mechanical, tribological and corrosion physiognomies of CNT-Al metal matrix composite (MMC) coatings deposited by cold gas dynamic spray (CGDS) process
Yingpeng Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Structural, mechanical and tribological investigations of CNT-316 stainless steel nanocomposites processed via spark plasma sintering
A. V. Radhamani et al.
TRIBOLOGY INTERNATIONAL (2020)
New study on tribological performance of AA7075-TiB2 nanocomposites
Shuaihang Pan et al.
TRIBOLOGY INTERNATIONAL (2020)
Nanoparticle-enabled phase modification (nano-treating) of CuZrSi pseudo-binary alloy
Gongcheng Yao et al.
MATERIALIA (2020)
Kinetics and dynamics of surface thermal oxidation in Al-ZrB2 nanocomposites
Shuaihang Pan et al.
CORROSION SCIENCE (2020)
Interface microstructure and strengthening mechanisms of multilayer graphene reinforced titanium alloy matrix nanocomposites with network architectures
Caiyun Shang et al.
MATERIALS & DESIGN (2020)
Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting
Ajay Mandal et al.
TRIBOLOGY INTERNATIONAL (2020)
Microstructural and mechano-tribological behavior of Al reinforced SiC-TiC hybrid metal matrix composite
Alip Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
As-cast magnesium AM60-based hybrid nanocomposite containing alumina fibres and nanoparticles: Microstructure and tensile behavior
Junxiang Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior
Chao Cai et al.
POWDER TECHNOLOGY (2019)
Tribological Behaviour of Al6061-2SiC-xGr Hybrid Metal Matrix Nanocomposites Fabricated through Ultrasonically Assisted Stir Casting Technique
A. Prasad Reddy et al.
SILICON (2019)
Advanced Metal Matrix Nanocomposites
Massoud Malaki et al.
METALS (2019)
Sulfur heat transfer behavior in vertically-oriented isochoric thermal energy storage systems
K. Jin et al.
APPLIED ENERGY (2019)
Facile fabrication and enhanced properties of Cu-40 wt% Zn/WC nanocomposite
Shuaihang Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and tribological behavior of interfaces in Cu-SiO2 and Cu-Cr metal matrix composites
Taimin Gong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of graphene nanoplatelets (GNPs) content on improvement of mechanical and tribological properties of AZ31 Mg matrix nanocomposite
M. Arab et al.
TRIBOLOGY INTERNATIONAL (2019)
Friction and wear maps of copper metal matrix composites with different iron volume content
Haibin Zhou et al.
TRIBOLOGY INTERNATIONAL (2019)
Preparation and high temperature tribological properties of laser in-situ synthesized self-lubricating composite coatings containing metal sulfides on Ti6Al4V alloy
Zhong-Yan Zhou et al.
APPLIED SURFACE SCIENCE (2019)
Reinforcement size dependence of mechanical properties and strengthening mechanisms in diamond reinforced titanium metal matrix composites
Farhad Saba et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition
C. L. Wu et al.
OPTICS AND LASER TECHNOLOGY (2019)
Surface modification of Al6061-SiC surface composite through impregnation of graphene, graphite & carbon nanotubes via FSP: A tribological study
Abhishek Sharma et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Frictional Contact Between the Diamond Tip and Graphene Step Edges
Nian Yin et al.
TRIBOLOGY LETTERS (2019)
Dry sliding tribological behavior of AZ31-WC nano-composites
Sudip Banerjee et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2019)
Experimental study on tribological properties of Cu-Al2O3 nanocomposite hybridized by graphene nanoplatelets
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2019)
Microstructure, deposition mechanism and tribological performance of graphene oxide reinforced Fe composite coatings by electro-brush plating technique
Guo Jin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Bulk ultrafine grained/nanocrystalline metals via slow cooling
Chezheng Cao et al.
SCIENCE ADVANCES (2019)
Through-thickness inhomogeneity in microstructure and tensile properties and tribological performance of friction stir processed AA1050-Al2O3 nanocomposite
R. Darzi Bourkhani et al.
COMPOSITES PART B-ENGINEERING (2019)
Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites
G. B. Veeresh Kumar et al.
COMPOSITES PART B-ENGINEERING (2019)
Fundamental theories and basic principles of triboelectric effect: A review
Shuaihang Pan et al.
FRICTION (2019)
Effects of ZrO2 crystal structure on the tribological properties of copper metal matrix composites
Haibin Zhou et al.
TRIBOLOGY INTERNATIONAL (2019)
Microstructure and tribological properties of plasma sprayed TiCN-Mo based composite coatings
Fanyong Zhang et al.
APPLIED SURFACE SCIENCE (2019)
Enhanced thermal stability in Cu-40 wt% Zn/WC nanocomposite
Shuaihang Pan et al.
MATERIALS & DESIGN (2019)
Design of TiCx nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
Bai-Xin Dong et al.
MATERIALS & DESIGN (2019)
Study on electrical behaviour of copper and its alloys containing dispersed nanoparticles
Shuaihang Pan et al.
CURRENT APPLIED PHYSICS (2019)
Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075
Maximilian Sokoluk et al.
NATURE COMMUNICATIONS (2019)
Tribological behaviour of self-lubricating materials at high temperatures
Hector Torres et al.
INTERNATIONAL MATERIALS REVIEWS (2018)
Microstructure and thermal behavior of diamond/Cu composites: Effects of surface modification
Chun Zhang et al.
DIAMOND AND RELATED MATERIALS (2018)
Effects of temperature and atmosphere on microstructure and tribological properties of plasma sprayed FeCrBSi coatings
Liming Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Mechanical properties of Al matrix composite reinforced with diamond particles with W coatings prepared by the magnetron sputtering method
Guoqin Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods
Bandar AlMangour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Facile synthesis of 10 nm surface clean TiB2 nanoparticles
Abdolreza Javadi et al.
MATERIALS LETTERS (2018)
In situ formation of TiC-particle-reinforced stainless steel matrix nanocomposites during ball milling: Feedstock powder preparation for selective laser melting at various energy densities
Bandar AlMangour et al.
POWDER TECHNOLOGY (2018)
Carbothermal shock synthesis of high-entropy-alloy nanoparticles
Yonggang Yao et al.
SCIENCE (2018)
Tribological properties of B4C reinforced aluminum composite coating produced by TIG re-melting of flame sprayed Al-Mg-B4C powder
Amirhosein Zabihi et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications
H. Torres et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Three-dimensional bicontinuous nanoporous materials by vapor phase dealloying
Zhen Lu et al.
NATURE COMMUNICATIONS (2018)
Dry Sliding Friction and Wear Behavior of AA7075-Si3N4 Composite
Mir Irfan Ul Haq et al.
SILICON (2018)
Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel
Y. Z. Li et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Dependence of wear behavior on sintering mechanism for Iron-Alumina Metal Matrix Nanocomposites
Pallav Gupta et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Decoupling the role of stress and corrosion in the intergranular cracking of noble-metal alloys
N. Badwe et al.
NATURE MATERIALS (2018)
Tribological properties of AZ31 alloy pre-deformed at low and high strain rates via the work function
Vikas Kumar et al.
WEAR (2018)
Investigations of mechanical, microstructural and tribological properties of Al2024 nanocomposite reinforced by TiO2 nanoparticles
S. H. Nourbakhsh et al.
MATERIALS RESEARCH EXPRESS (2018)
Tribological properties, thermal conductivity and corrosion resistance of titanium/nanodiamond nanocomposites
Farhad Saba et al.
COMPOSITES COMMUNICATIONS (2018)
An investigation on dry sliding wear behaviour of AA6061-AlNp composite
Mahesh K. Naidu et al.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING (2018)
Scalable Manufacturing of AgCu40(wt%)-WC Nanocomposite Microwires
Zeyi Guan et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2018)
Role of Mo on tribological properties of atmospheric plasma-sprayed Mo-NiCrBSi composite coatings under dry and oil-lubricated conditions
Chao Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Triboelectric effect: A new perspective on electron transfer process
Shuaihang Pan et al.
JOURNAL OF APPLIED PHYSICS (2017)
Reinforcement Size Dependence of Load Bearing Capacity in Ultrafine-Grained Metal Matrix Composites
Hanry Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites
Abolfazl Azarniya et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Corrosion effect of phase change materials in solar thermal energy storage application
Anusuiah Vasu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
The Braking Behaviors of Cu-Based Metallic Brake Pad for High-Speed Train Under Different Initial Braking Speed
Tao Peng et al.
TRIBOLOGY LETTERS (2017)
A Deterministic Stress-Activated Model for Tribo-Film Growth and Wear Simulation
Aydar Akchurin et al.
TRIBOLOGY LETTERS (2017)
Metallurgical Challenges in Carbon Nanotube-Reinforced Metal Matrix Nanocomposites
Abolfazl Azarniya et al.
METALS (2017)
Influence of tribology on global energy consumption, costs and emissions
Kenneth Holmberg et al.
FRICTION (2017)
Preparation of super-high strength nanostructured B4C reinforced Al-2Cu aluminum alloy matrix composites by mechanical milling and hot press method: Microstructural, mechanical and tribological characterization
Ali Alizadeh et al.
ADVANCED POWDER TECHNOLOGY (2017)
Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting
Apratim Khandelwal et al.
COMPOSITES PART B-ENGINEERING (2017)
Tribological and surface behavior of silicon carbide reinforced aluminum matrix nanocomposite
I. Manivannan et al.
SURFACES AND INTERFACES (2017)
Effect of graphene addition on the mechanical and tribological behavior of nanostructured AA2124 self-lubricating metal matrix composite
A. El-Ghazaly et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Friction and wear behavior of Al-SiC(n) hybrid composites with carbon addition
Bartosz Hekner et al.
COMPOSITES PART B-ENGINEERING (2017)
Microstructure Modeling and Ultrasonic Wave Propagation Simulation of A206-Al2O3 Metal Matrix Nanocomposites for Quality Inspection
Yuhang Liu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Interfacial Shear Strength of Multilayer Graphene Oxide Films
Matthew Daly et al.
ACS NANO (2016)
Fatigue fracture of friction-stir processed Al-Al3Ti-MgO hybrid nanocomposites
P. Sahandi Zangabad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
First-Principle Molecular Dynamics of Sliding Diamond Surfaces: Tribochemical Reactions with Water and Load Effects
Maria Clelia Righi et al.
JOURNAL OF LOW TEMPERATURE PHYSICS (2016)
Interfacial strength and deformation mechanism of SiC-Al composite micro-pillars
Xiaolei Guo et al.
SCRIPTA MATERIALIA (2016)
Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites
Sareh Mosleh-Shirazi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Tribological behaviour at various temperatures of WC-Co coatings prepared using different thermal spraying techniques
Zhe Geng et al.
TRIBOLOGY INTERNATIONAL (2016)
Advances in atomic-scale tribological mechanisms of solid interfaces
Jingyan Nian et al.
TRIBOLOGY INTERNATIONAL (2016)
Effects, of annealing on laser clad Ti2SC/CrS self-lubricating anti-wear composite coatings on Ti6Al4V alloy: Microstructure and tribology
Xiao-Long Lu et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological Behavior of a Cold-Sprayed Cu-MoS2 Composite Coating During Dry Sliding Wear
Yinyin Zhang et al.
TRIBOLOGY LETTERS (2016)
Tribological behavior of borided AISI 1018 steel under linear reciprocating sliding conditions
R. Carrera-Espinoza et al.
WEAR (2016)
Improving wear performance of CuSn5Bi5 alloys through forming self-organized graphene/Bi nanocomposite tribolayer
Z. C. Lu et al.
WEAR (2016)
Mechanical and tribological properties of AA7075-TiC metal matrix composites under heat treated (T6) and cast conditions
Veeravalli Ramakoteswara Rao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene - A review
Afsaneh Dorri Moghadam et al.
COMPOSITES PART B-ENGINEERING (2015)
A molecular dynamics study of bond strength and interface conditions in the Al/Al2O3 metal-ceramic composites
A. Sazgar et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: A comparative study focusing on particle capture in matrix
M. Karbalaei Akbari et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
Preparation of in-situ Cu/NbC nanocomposite and its functionally graded behavior for electrical contact applications
S. Gholami Shiri et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Michael Oluwatosin Bodunrin et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization
Narayana Yuvaraj et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Effect of friction stir processing on the microstructure and mechanical properties of Cu-TiC composite
M. Sabbaghian et al.
CERAMICS INTERNATIONAL (2014)
Functional Metal Matrix Composites: Self-lubricating, Self-healing, and Nanocomposites-An Outlook
Afsaneh Dorri Moghadam et al.
JOM (2014)
Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing
Y. Mazaheri et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion
Kaveh Edalati et al.
WEAR (2014)
Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique
M. Bashirzadeh et al.
APPLIED SURFACE SCIENCE (2013)
Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates
Dung D. Luong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Dry sliding wear behaviour of in situ Al-TiB2 composites
K. Niranjan et al.
MATERIALS & DESIGN (2013)
Nanoscale wear as a stress-assisted chemical reaction
Tevis D. B. Jacobs et al.
NATURE NANOTECHNOLOGY (2013)
Tribological and tribocorrosion behaviour of electrodeposited CoW alloys and CoW-WC nanocomposites
S. K. Ghosh et al.
TRIBOLOGY INTERNATIONAL (2013)
Microscratch behavior of copper-graphite composites
Jin-Kun Xiao et al.
TRIBOLOGY INTERNATIONAL (2013)
Tribological behavior of microwave processed copper-nanographite composites
K. Rajkumar et al.
TRIBOLOGY INTERNATIONAL (2013)
Wear characteristics of Al-Cr-O surface nano-composite layer fabricated on Al6061 plate by friction stir processing
S. R. Anvari et al.
WEAR (2013)
Effect of particle concentration on the structure and tribological properties of submicron particle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition
H. Gul et al.
APPLIED SURFACE SCIENCE (2012)
Effect of reactive gas composition on the microstructure, growth mechanism and friction coefficient of TiC overlayers
P. K. Ajikumar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications
Wei Yu et al.
JOURNAL OF NANOMATERIALS (2012)
Theoretical study and pathways for nanoparticle capture during solidification of metal melt
J. Q. Xu et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2012)
Potential energy surface for graphene on graphene: Ab initio derivation, analytical description, and microscopic interpretation
M. Reguzzoni et al.
PHYSICAL REVIEW B (2012)
Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites
Lian-Yi Chen et al.
SCRIPTA MATERIALIA (2012)
Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing
Ahmad Ghasemi-Kahrizsangi et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Frictional characteristics of exfoliated and epitaxial graphene
Young Jun Shin et al.
CARBON (2011)
Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites
E. Mohammad Sharifi et al.
MATERIALS & DESIGN (2011)
Effect of Mo addition on the microstructure and wear resistance of in situ TiC/Al composite
Qianlin Wu et al.
MATERIALS & DESIGN (2011)
Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process
A. Kazemi Talachi et al.
MATERIALS CHARACTERIZATION (2011)
Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles' size and volume fraction
M. Barmouz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
In situ Raman spectroscopy for examination of high temperature tribological processes
C. Muratore et al.
WEAR (2011)
Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites
C. S. Ramesh et al.
WEAR (2011)
Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000 °C
S. M. Aouadi et al.
ACTA MATERIALIA (2010)
Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates
S. Suresha et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Mechanical and dry sliding wear properties of silicon carbide particulate reinforced aluminium-copper alloy matrix composites produced by direct squeeze casting method
Adem Onat
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel
P. Hausild et al.
MATERIALS & DESIGN (2010)
Roughness picture of friction in dry nanoscale contacts
Yifei Mo et al.
PHYSICAL REVIEW B (2010)
Frictional Characteristics of Atomically Thin Sheets
Changgu Lee et al.
SCIENCE (2010)
Contact/scratch-induced surface deformation and damage of copper-graphite particulate composites
T. Futami et al.
CARBON (2009)
Modelling of plowing and shear friction coefficients during high-temperature ball-on-disc tests
L. Wang et al.
TRIBOLOGY INTERNATIONAL (2009)
Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings
M. Lindquist et al.
WEAR (2009)
Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates
Q. B. Nguyen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Improvement of wear resistance of wire drawing rolls with Cr-Ni-B-Si plus WC thermal spraying powders
Nejat Y. Sari et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Mechanisms of sliding wear of metals and alloys at elevated temperatures
A. Pauschitz et al.
TRIBOLOGY INTERNATIONAL (2008)
Tribocorrosion in implants - assessing high carbon and low carbon Co-Cr-Mo alloys by in situ electrochemical measurements
Yu Yan et al.
TRIBOLOGY INTERNATIONAL (2006)
Application of thermal spraying in the automobile industry
Barbezat Gerard
SURFACE & COATINGS TECHNOLOGY (2006)
The role of graphite particles in the high-temperature wear of copper hybrid composites against steel
YZ Zhan et al.
MATERIALS & DESIGN (2006)
Effect of SiC addition and running-in-wear on the sliding wear behaviour of AI-Zn-Mg aluminium alloy
DP Mondal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Testing of thermocline filler materials and molten-salt heat transfer fluids for thermal energy storage systems in parabolic trough power plants
D Brosseau et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Effects of nano-diamond particles on the structure and tribological property of Ni-matrix nanocomposite coatings
LP Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
The wear behaviour of electro-codeposited Ni-SiC composites
KH Hou et al.
WEAR (2002)
Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles
I Garcia et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Mechanical instability and ideal shear strength of transition metal carbides and nitrides
SH Jhi et al.
PHYSICAL REVIEW LETTERS (2001)
Evolution of nanoporosity in dealloying
J Erlebacher et al.
NATURE (2001)
Transfer, mixing and associated chemical and mechanical processes during the sliding of ductile materials
DA Rigney
WEAR (2000)
Heat transfer enhancement of nanofluids
YM Xuan et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2000)