4.6 Review

Organic Thin Films Deposited by Matrix-Assisted Pulsed Laser Evaporation (MAPLE) for Photovoltaic Cell Applications: A Review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

18.69% PCE from organic solar cells

Ke Jin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Review Physics, Multidisciplinary

Research progress of rubrene as an excellent multifunctional organic semiconductor

Si Liu et al.

Summary: This review introduces the preparation of rubrene crystals and their applications in organic optoelectronic devices, as well as future research directions and challenges in the field.

FRONTIERS OF PHYSICS (2021)

Article Chemistry, Physical

Fabrication of silver nanoparticle films by pulsed laser deposition in flowless open air and studying the effects of laser fluence and number of pulses

Mohsen Bonjakhi et al.

Summary: In this study, pulsed laser deposition was used to fabricate Ag nanoparticle films in open air without flowing gas. The films were characterized using FESEM, HRTEM, and UV/Vis absorption spectroscopy, and the surface plasmon resonance characteristics were extracted from the UV/Vis spectrum. The fabricated NP films showed significant enhancement in Raman signals, demonstrating their potential application in sensors.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Polymer Science

Bilayer PMMA antireflective coatings via microphase separation and MAPLE

Yunlong Guo et al.

Summary: This study presents a novel approach to fabricate bilayer antireflective coating (ARC) with two different structures using polymeric microphase separation and matrix-assisted pulsed laser evaporation (MAPLE). The spin-coated layer and the MAPLE-deposited surface layer exhibit subwavelength porous network structures and a biomimic moth-eye structure, respectively, contributing to high transmittance in the visible range. The wetting motion of PMMA globules and positive contributions of the moth-eye structure to the improvement of transmittance are also observed.

JOURNAL OF POLYMER ENGINEERING (2021)

Article Energy & Fuels

Solar cell efficiency tables (version 57)

Martin Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules, including guidelines for inclusion of results and reviewing new entries since June 2020. It also includes charts showing efficiency improvements since 1993 and an updated list of recognized test centers.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Multidisciplinary Sciences

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

Ming Zhang et al.

Summary: By using quaternary blends, double cascading energy level alignment is achieved in bulk heterojunction organic photovoltaic active layers, optimizing light absorption, carrier transport, and charge-transfer state energy levels for higher power conversion efficiencies. The chemical structures of donors and acceptors allow control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

18.4 % Organic Solar Cells Using a High Ionization Energy Self-Assembled Monolayer as Hole-Extraction Interlayer

Yuanbao Lin et al.

Summary: Self-assembled monolayers based on Br-2PACz, 2PACz, and MeO-2PACz were investigated as hole-extracting interlayers in organic photovoltaics. OPV cells using ITO/Br-2PACz anodes exhibited the highest power conversion efficiency due to the significantly higher work function of the ITO/Br-2PACz electrode, leading to improved hole transport and longer carrier lifetimes.

CHEMSUSCHEM (2021)

Article Chemistry, Multidisciplinary

Biofilm-Resistant Nanocoatings Based on ZnO Nanoparticles and Linalool

Vera Alexandra Spirescu et al.

Summary: Biofilms pose a growing challenge in medical practice globally, threatening public health. Researchers are focusing on developing more effective antimicrobial strategies, with nanostructured surfaces based on zinc oxide and biologically active molecules showing promising capability to modulate clinically relevant microbial biofilms.

NANOMATERIALS (2021)

Article Physics, Applied

Host-guest exchange contribution to transition temperature downshift in nanocrystalline Fe(pyrazine)[Pt(CN)4] thin films prepared by matrix-assisted pulsed laser evaporation

Miroslaw Sawczak et al.

Summary: This study investigates the influence of guest molecules on the spin transition characteristics of iron(II) complexes in thin films deposited using laser ablation in different solvents. The experimental results show that the deposition conducted in N-2 at atmospheric pressure yields thin films with properties closely resembling the reference material. The observed laser-induced host-guest exchange suggests the possibility of selectively modifying the thin layers of SCO materials to achieve desired characteristics.

JOURNAL OF APPLIED PHYSICS (2021)

Article Pharmacology & Pharmacy

Composite Drug Delivery System Based on Amorphous Calcium Phosphate-Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

Anita Ioana Visan et al.

Summary: The study suggests that the proposed composite coatings release the drug in two stages, with optimized coatings strongly inhibiting the growth of tested bacteria and showing excellent biocompatibility with bone-like cells. The research opens up the possibility of a new generation of antimicrobial coatings for implants and prevention of nosocomial and large area contamination.

PHARMACEUTICS (2021)

Article Biochemistry & Molecular Biology

Smart Coatings Prepared via MAPLE Deposition of Polymer Nanocapsules for Light-Induced Release

Valentina Marturano et al.

Summary: This study presents smart coatings based on photo-responsive polymer nanocapsules deposited by laser evaporation, combining controllable release and high encapsulation efficiency. The Matrix-Assisted Pulsed Laser Evaporation (MAPLE) technique showed versatility and performance in fabricating these coatings with remarkable adhesion achieved. Thyme oil and coumarin 6 release experiments demonstrated the potential of MAPLE for creating photo-responsive coatings on various substrates.

MOLECULES (2021)

Article Chemistry, Multidisciplinary

Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two-in-One Strategy

Feng Liu et al.

Summary: A high-performance ternary solar cell utilizing a large-bandgap polymer donor and two structurally similar small-bandgap alloy acceptors is reported, achieving a power conversion efficiency of over 18%. By delicately regulating the energy levels of the alloy acceptor through varying the ratio of the two acceptors, more efficient hole transfer and exciton separation are achieved, contributing to reduced energy loss and better overall performance compared to single acceptor systems. Such a two-in-one alloy strategy shows promise in boosting the photovoltaic performance of devices.

ADVANCED MATERIALS (2021)

Article Biochemistry & Molecular Biology

Isoflavonoid-Antibiotic Thin Films Fabricated by MAPLE with Improved Resistance to Microbial Colonization

Valentina Grumezescu et al.

Summary: This study demonstrated that the use of polyvinylpyrrolidone/antibiotic/isoflavonoid thin films deposited by MAPLE method successfully prevented bacterial colonization on biomedical surfaces, showing resistance to microbial adhesion and biofilm formation.

MOLECULES (2021)

Article Chemistry, Physical

Rubrene Thin Films with Viably Enhanced Charge Transport Fabricated by Cryo-Matrix-Assisted Laser Evaporation

Rafal Jendrzejewski et al.

Summary: Rubrene films with high crystalline content were successfully fabricated by matrix-assisted laser evaporation in this study, revealing the presence of spherulitic structures and nanowires. Minimal material decomposition and absence of RB peroxides were consistently shown, resulting in enhanced charge transport and carrier mobility close to the technologically accepted level, making these rubrene films attractive for spintronic and optoelectronic applications.

MATERIALS (2021)

Review Materials Science, Multidisciplinary

Nature-inspired materials: Emerging trends and prospects

Nirmal Kumar Katiyar et al.

Summary: Nature-inspired materials are derived from imitating materials, processes, and designs found in nature, and possess specific functionalities that rely on our ability to harness particular gains in various fields such as electrical, mechanical, biological, chemical, and sustainable resources.

NPG ASIA MATERIALS (2021)

Article Energy & Fuels

Investigating the Indoor Performance of Planar Heterojunction Based Organic Photovoltaics

Sang Hyeon Kim et al.

Summary: Recent research has shown that by modulating the thickness of the ICBA layer to 65 nm, the performance of indoor OPVs based on PHJ has been optimized, achieving a power conversion efficiency comparable to that of BHJ OPVs.

IEEE JOURNAL OF PHOTOVOLTAICS (2021)

Article Chemistry, Multidisciplinary

Thin Films of Metal-Organic Framework Interfaces Obtained by Laser Evaporation

Olivia L. Rose et al.

Summary: The study successfully used matrix-assisted pulsed laser evaporation (MAPLE) to fabricate ZIF-8 films, allowing for user-controlled physical and chemical properties by correlating laser fluency and specific transfer of lab-synthesized ZIF-8. The deposited films maintained the integrity of the individual ZIF-8 framework with minor crystalline and surface chemistry changes, demonstrating the suitability of the listed deposition method for creating composite architectures in various applications.

NANOMATERIALS (2021)

Article Chemistry, Multidisciplinary

Modification of the SnO2 Electron Transporting Layer by Using Perylene Diimide Derivative for Efficient Organic Solar Cells

Tianyu Kong et al.

Summary: Introducing the perylene diimide derivative PDINO successfully eliminated defects between the tin oxide nanoparticles electron transporting layer and the active layer, significantly improving the power conversion efficiency of organic solar cells.

FRONTIERS IN CHEMISTRY (2021)

Article Pharmacology & Pharmacy

Anti-Cancer Nanopowders and MAPLE-Fabricated Thin Films Based on SPIONs Surface Modified with Paclitaxel Loaded β-Cyclodextrin

Rebecca Alexandra Puiu et al.

Summary: Globally, cancer is the second leading cause of death, with Europe accounting for nearly 25% of the global cancer burden. Smart nano-engineered targeted drug delivery systems, such as magnetically targetable SPIONs, offer solutions to the inefficiencies and side effects associated with conventional anti-cancer drugs. These SPIONs demonstrate excellent biocompatibility and anti-tumor activity, making them promising candidates for future cancer treatment applications.

PHARMACEUTICS (2021)

Article Biotechnology & Applied Microbiology

Interfaces obtained by MAPLE for chemical and biosensors applications

Anca Bonciu et al.

Summary: This minireview evaluates chemical sensors and biosensors with bio/sensitive active films obtained by MAPLE, and critically appraises various categories of biosensors and their applications. The deposition of active layers of biomolecules is discussed in relation to experimental parameters, highlighting the preservation of structure and activity. Additionally, chemoselective layers, temperature responsive and antifouling coatings are reviewed for their potential combination with active layers to obtain advanced sensing interfaces, showcasing the versatility of MAPLE.

SENSORS AND ACTUATORS REPORTS (2021)

Article Crystallography

Transparent MXene-Polymer Supercapacitive Film Deposited Using RIR-MAPLE

Alec Ajnsztajn et al.

CRYSTALS (2020)

Review Materials Science, Multidisciplinary

Biomimetic Coatings Obtained by Combinatorial Laser Technologies

Emanuel Axente et al.

COATINGS (2020)

Article Energy & Fuels

Rise of nature-inspired solar photovoltaic energy convertors

Najiba Soudi et al.

SOLAR ENERGY (2020)

Article Materials Science, Multidisciplinary

MAPLE Deposition of Binary and Ternary Organic Bulk Heterojunctions Based on Zinc Phthalocyanine

Marcela Socol et al.

COATINGS (2020)

Article Chemistry, Multidisciplinary

Organic Thin Films Based on DPP-DTT:C60 Blends Deposited by MAPLE

Marcela Socol et al.

NANOMATERIALS (2020)

Article Chemistry, Multidisciplinary

Polymer nanocomposite sunlight spectrum down-converters made by open-air PLD

Abdalla M. Darwish et al.

NANOTECHNOLOGY REVIEWS (2020)

Review Materials Science, Multidisciplinary

Latest Development on Pulsed Laser Deposited Thin Films for Advanced Luminescence Applications

Simon N. Ogugua et al.

COATINGS (2020)

Review Chemistry, Multidisciplinary

Recent progress in porphyrin- and phthalocyanine-containing perovskite solar cells

Yutaka Matsuo et al.

RSC ADVANCES (2020)

Article Nanoscience & Nanotechnology

Structural and Morphological of Pulsed Laser Deposited Magnesium Phthalocyanine (MgPc) Thin Film

Noor M. Ibrahim et al.

NANO HYBRIDS AND COMPOSITES (2020)

Review Chemistry, Physical

Hole transport layers for organic solar cells: recent progress and prospects

Haitao Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Multidisciplinary

Recent progress in indoor organic photovoltaics

Hwa Sook Ryu et al.

NANOSCALE (2020)

Review Chemistry, Multidisciplinary

Recent progress in flexible-wearable solar cells for self-powered electronic devices

Seyyed Alireza Hashemi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Physical

Metal-oxide nanostructures produced by PLD in open air for gas sensor applications

G. Atanasova et al.

APPLIED SURFACE SCIENCE (2019)

Review Biochemistry & Molecular Biology

Materials for Photovoltaics: State of Art and Recent Developments

Jose Antonio Luceno-Sanchez et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Article Engineering, Electrical & Electronic

Deposition of β-Polyfluorene by Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

Spencer Ferguson et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

Article Chemistry, Analytical

Highly selective surface acoustic wave e-nose implemented by laser direct writing

Massimiliano Benetti et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Nanoscience & Nanotechnology

Ultrafast nonlinear transparency driven at a telecom wavelength in an organic semiconductor system

Joong-Mok Park et al.

AIP ADVANCES (2019)

Article Chemistry, Inorganic & Nuclear

Nanocrystalline Polymer Impregnated [Fe(pz)Pt(CN)4] Thin Films Prepared by Matrix-Assisted Pulsed Laser Evaporation

Miroslaw Sawczak et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2019)

Article Materials Science, Multidisciplinary

Macrophage in vitro Response on Hybrid Coatings Obtained by Matrix Assisted Pulsed Laser Evaporation

Madalina Icriverzi et al.

COATINGS (2019)

Review Energy & Fuels

A comprehensive review on bioinspired solar photovoltaic cells

Ramalingam Senthil et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

Article Nanoscience & Nanotechnology

Self-Assembled Monolayers at the Conjugated Polymer/Electrode Interface: Implications for Charge Transport and Band-Bending Behavior

J. K. Wenderott et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

Magnetic-field-assisted formation of oriented nanowires produced by pld in open air

Rumen G. Nikov et al.

APPLIED SURFACE SCIENCE (2018)

Article Polymer Science

Molecular weight dependent structure and charge transport in MAPLE-deposited poly(3-hexylthiophene) thin films

Ban Xuan Dong et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)

Article Green & Sustainable Science & Technology

Polymer solar cells: P3HT: PCBM and beyond

P. R. Berger et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2018)

Article Chemistry, Physical

MAPbI3 Solar Cells with Absorber Deposited by Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

Wiley A. Dunlap-Shohl et al.

ACS ENERGY LETTERS (2018)

Article Materials Science, Multidisciplinary

Flexible organic heterostructures obtained by MAPLE

M. Socol et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)

Article Polymer Science

Molecular organization in MAPLE-deposited conjugated polymer thin films and the implications for carrier transport characteristics

Ban Xuan Dong et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)

Article Nanoscience & Nanotechnology

Au nanostructure fabrication by pulsed laser deposition in open air: Influence of the deposition geometry

Rumen G. Nikov et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Low-loss deuterated organic solvents for visible and near-infrared photonics

Malte Plidschun et al.

OPTICAL MATERIALS EXPRESS (2017)

Article Materials Science, Multidisciplinary

Band bending in conjugated polymer films: role of morphology and implications for bulk charge transport characteristics

J. K. Wenderott et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Review Physics, Applied

Organic/hybrid thin films deposited by matrix-assisted pulsed laser evaporation (MAPLE)

Adrienne D. Stiff-Roberts et al.

APPLIED PHYSICS REVIEWS (2017)

Article Nanoscience & Nanotechnology

Crystallization Mechanism and Charge Carrier Transport in MAPLE-Deposited Conjugated Polymer Thin Films

Ban Xuan Dong et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Proceedings Paper Materials Science, Multidisciplinary

Novel Ternary Blend of PCDTBT, PCPDTBT and PC70BM for the Fabrication of Bulk Heterojunction Organic Solar Cells

T. Pratyusha et al.

MATERIALS TODAY-PROCEEDINGS (2017)

Article Materials Science, Multidisciplinary

ZnO nanostructures produced by pulsed laser deposition in open air

Ru. G. Nikov et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Proceedings Paper Optics

Organic semiconductor rubrene thin films deposited by pulsed laser evaporation of solidified solutions

N. Majewska et al.

THIRD INTERNATIONAL CONFERENCE ON APPLICATIONS OF OPTICS AND PHOTONICS (2017)

Article Chemistry, Physical

Organic heterostructures deposited by MAPLE on AZO substrate

M. Socol et al.

APPLIED SURFACE SCIENCE (2017)

Article Materials Science, Multidisciplinary

The growth of zinc phthalocyanine thin films by pulsed laser deposition

Michal Novotny et al.

JOURNAL OF MATERIALS RESEARCH (2016)

Article Chemistry, Physical

MAPLE preparation and characterization of mixed arylenevinylene based oligomers:C60 layers

A. Stanculescu et al.

APPLIED SURFACE SCIENCE (2016)

Article Chemistry, Physical

Flexible heterostructures based on metal phthalocyanines thin films obtained by MAPLE

M. Socol et al.

APPLIED SURFACE SCIENCE (2016)

Article Biochemistry & Molecular Biology

Bioactive ZnO Coatings Deposited by MAPLE-An Appropriate Strategy to Produce Efficient Anti-Biofilm Surfaces

Alexandra Elena Oprea et al.

MOLECULES (2016)

Article Materials Science, Multidisciplinary

White multi-layered polymer light emitting diode through matrix assisted pulsed laser evaporation

F. Mariano et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Article Energy & Fuels

Comparison of the indoor performance of 12 commercial PV products by a simple model

Georgia Apostolou et al.

ENERGY SCIENCE & ENGINEERING (2016)

Article Chemistry, Physical

MAPLE prepared heterostructures with arylene based polymer active layer for photovoltaic applications

F. Stanculescu et al.

APPLIED SURFACE SCIENCE (2015)

Review Chemistry, Multidisciplinary

ZnO cathode buffer layers for inverted polymer solar cells

Zhiqiang Liang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer

Shenghua Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Materials Science, Multidisciplinary

Influence of morphological disorder on in- and out-of-plane charge transport in conjugated polymer films

Anton Li et al.

MRS COMMUNICATIONS (2015)

Article Materials Science, Multidisciplinary

Engineering gate dielectric surface properties for enhanced polymer field-effect transistor performance

Yanlian Lei et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Proceedings Paper Physics, Applied

Fabrication and characterization of P3HT:PCBM-based thin film organic solar cells with zinc phthalocyanine

Haruto Maruhashi et al.

IRAGO CONFERENCE 2014 (2015)

Article Materials Science, Multidisciplinary

Laser prepared organic heterostructures based on star-shaped arylenevinylene compounds

A. Stanculescu et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)

Article Chemistry, Physical

Laser prepared organic heterostuctures on glass/AZO substrates

Anca Stanculescu et al.

APPLIED SURFACE SCIENCE (2014)

Article Chemistry, Physical

Organic heterostructures based on arylenevinylene oligomers deposited by MAPLE

M. Socol et al.

APPLIED SURFACE SCIENCE (2014)

Review Materials Science, Multidisciplinary

How to design low bandgap polymers for highly efficient organic solar cells

Tao Xu et al.

MATERIALS TODAY (2014)

Article Nanoscience & Nanotechnology

Antimicrobial nanospheres thin coatings prepared by advanced pulsed laser technique

Alina Maria Holban et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2014)

Review Computer Science, Information Systems

Electron and Hole Transport Layers: Their Use in Inverted Bulk Heterojunction Polymer Solar Cells

Sandro Lattante

ELECTRONICS (2014)

Article Polymer Science

MAPLE Deposition of Macromolecules

Kimberly B. Shepard et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2013)

Article Thermodynamics

Solubility Properties of Unsubstituted Metal Phthalocyanines in Different Types of Solvents

Fatemeh Ghani et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2012)

Review Nanoscience & Nanotechnology

Matrix-Assisted Pulsed Laser Thin Film Deposition by Using Nd:YAG Laser

Francesco Bloisi et al.

JOURNAL OF NANOMATERIALS (2012)

Article Materials Science, Multidisciplinary

Phase separation analysis of bulk heterojunctions in small-molecule organic solar cells using zinc-phthalocyanine and C60

Christoph Schuenemann et al.

PHYSICAL REVIEW B (2012)

Article Materials Science, Multidisciplinary

Maple prepared organic heterostructures for photovoltaic applications

A. Stanculescu et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Article Materials Science, Multidisciplinary

MAPLE activities and applications in gas sensors

Miroslav Jelinek et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Article Materials Science, Multidisciplinary

Resonant infrared laser deposition of polymer-nanocomposite materials for optoelectronic applications

Hee K. Park et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Article Materials Science, Multidisciplinary

Processing of C60 thin films by Matrix-Assisted Pulsed Laser Evaporation (MAPLE)

S. Canulescu et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Review Materials Science, Multidisciplinary

Applications of the matrix-assisted pulsed laser evaporation method for the deposition of organic, biological and nanoparticle thin films: a review

Anna Paola Caricato et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Article Materials Science, Multidisciplinary

The Matrix-Assisted Pulsed Laser Evaporation (MAPLE) process: origins and future directions

Alberto Pique

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)

Article Physics, Applied

Organic photovoltaics incorporating electron conducting exciton blocking layers

Brian E. Lassiter et al.

APPLIED PHYSICS LETTERS (2011)

Proceedings Paper Engineering, Electrical & Electronic

Application and design of solar photovoltaic system

Li Tianze et al.

3RD INTERNATIONAL PHOTONICS AND OPTOELECTRONICS MEETINGS (POEM 2010) (2011)

Article Multidisciplinary Sciences

Solar Power Wires Based on Organic Photovoltaic Materials

Michael R. Lee et al.

SCIENCE (2009)

Review Energy & Fuels

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Frederik C. Krebs

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)

Article Engineering, Electrical & Electronic

Tabletop resonant infrared matrix-assisted pulsed laser evaporation of light-emitting organic thin films

Ryan Pate et al.

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2008)

Article Materials Science, Multidisciplinary

Biomaterial thin film deposition and characterization by means of MAPLE technique

F. Bloisi et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)

Article Energy & Fuels

Strategies for incorporation of polymer photovoltaics into garments and textiles

FC Krebs et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2006)

Article Chemistry, Physical

Band gap engineering for poly(p-phenylene) and poly(p-phenylene vinylene) copolymers using the tight-binding approach

R Giro et al.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2005)

Article Materials Science, Multidisciplinary

UV and RIR matrix assisted pulsed laser deposition of organic MEH-PPV films

B Toftmann et al.

THIN SOLID FILMS (2004)

Article Materials Science, Multidisciplinary

Growth of polyalkylthiophene films by matrix assisted pulsed laser evaporation

A Gutiérrez-Llorente et al.

ORGANIC ELECTRONICS (2004)

Article Polymer Science

Combinatorial pulsed laser deposition of pentacene films for field effect devices

J Yamaguchi et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2004)

Article Instruments & Instrumentation

Laser transfer of biomaterials:: Matrix-assisted pulsed laser evaporation (MAPLE) and MAPLE Direct Write

PK Wu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2003)

Article Physics, Applied

The effect of the matrix on film properties in matrix-assisted pulsed laser evaporation

DM Bubb et al.

JOURNAL OF APPLIED PHYSICS (2002)