相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
Senol Sirin et al.
TRIBOLOGY INTERNATIONAL (2021)
Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect
Danil Yu Pimenov et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Metrological analysis of surface quality aspects in minimum quantity cooling lubrication
R. W. Maruda et al.
MEASUREMENT (2021)
Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718
Mohd Danish et al.
TRIBOLOGY INTERNATIONAL (2021)
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
Murat Sarikaya et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant
Teng Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of Hastelloy X
Emine Sirin et al.
TRIBOLOGY INTERNATIONAL (2021)
A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process
Munish Kumar Gupta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A
Mehmet Erdi Korkmaz et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Analysis and optimization of surface quality while machining high strength aluminium alloy
G. C. Manjunath Patel et al.
MEASUREMENT (2020)
Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
Cagri Vakkas Yildirim et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Progress for sustainability in the mist assisted cooling techniques: a critical review
Gurraj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of cryogenic treatment on mechanical performance of friction stir Al-Zn-Cu alloy weldments
Anuj Bansal et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
被撤回的出版物: Evaluation of tool temperature distribution in MQL drilling of aluminum 2024-T351 (Retracted article. See vol. 93, pg. 287, 2023)
Zhaoju Zhu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
Oguzhan Ondin et al.
TRIBOLOGY INTERNATIONAL (2020)
Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy
Fatih Gunan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives
Xiaoming Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics
Min Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions
Min Yang et al.
CERAMICS INTERNATIONAL (2019)
Ecological trends in machining as a key factor in sustainable production - A review
G. M. Krolczyk et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant
Xin Cui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
Cagri Vakkas Yildirim et al.
TRIBOLOGY INTERNATIONAL (2019)
Analysis of Secondary Adhesion Wear Mechanism on Hard Machining of Titanium Aerospace Alloy
Moises Batista Ponce et al.
MATERIALS (2019)
Performance Evaluation of MQCL Hard Milling of SKD 11 Tool Steel Using MoS2 Nanofluid
Pham Quang Dong et al.
METALS (2019)
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
Zafar Said et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Evaluating the Rheological and Tribological Behaviors of Coconut Oil Modified with Nanoparticles as Lubricant Additives
Vicente Cortes et al.
LUBRICANTS (2019)
Performance Evaluation of MQL Parameters Using Al2O3 and MoS2 Nanofluids in Hard Turning 90CrSi Steel
Tran Minh Duc et al.
LUBRICANTS (2019)
Influence of Different Cooling Methods on Tool Life, Wear Mechanisms and Surface Roughness in the Milling of Nickel-Based Waspaloy with WC Tools
Cagri Vakkas Yildirim et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2019)
Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing
Padmini Rapeti et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions
G. M. Krolczyk et al.
MEASUREMENT (2018)
Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
Shuming Guo et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production
G. M. Krolczyk et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Measurement and prediction of cutting temperatures during dry milling: review and discussions
N. L. Bhirud et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Effect of TiO2 nanoparticles on wettability and tribological performance of aqueous suspension
Linghui Kong et al.
WEAR (2017)
Preparation, characterization and tribological mechanism of nanofluids
Linghui Kong et al.
RSC ADVANCES (2017)
Indirect adhesion wear parametric analysis in the dry turning of UNS A97075 Alloys
S. Martin-Bejar et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
A Review on Application of Nanofluid MQL in Machining
Mustafa Rifat et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED SCIENCE (ICMEAS 2017) (2017)
Determination of MQL Parameters Contributing to Sustainable Machining in the Milling of Nickel-Base Superalloy Waspaloy
Cagri Vakkas Yildirim et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)
Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The effect of application of cutting fluid with solid lubricant in suspension during cutting of Ti-6Al-4V alloy
Ricardo R. Moura et al.
WEAR (2015)
Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy
Bizhan Rahmati et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Evaluation of ionic liquids as lubricants in micro milling - process capability and sustainability
Minh-Quan Pham et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide(MoS2) nanolubrication in end milling machining
Bizhan Rahmati et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
Mohd Sayuti et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding
Dongzhou Jia et al.
JOURNAL OF NANOPARTICLE RESEARCH (2014)
Detailed analysis of microstructure of intentionally formed built-up edges for improving wear behaviour in dry metal cutting process of steel
Johannes Kuemmel et al.
WEAR (2014)
Tool wear mechanisms in the machining of Nickel based super-alloys: A review
Waseem Akhtar et al.
FRONTIERS OF MECHANICAL ENGINEERING (2014)
An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique
Mohammadjafar Hadad et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys
A. Gomez-Parra et al.
WEAR (2013)
Effect of Artificial Aging on the Mechanical Properties of an Aerospace Aluminum Alloy 2024
D. A. P. Reis et al.
DIFFUSION IN SOLIDS AND LIQUIDS VII (2012)
Tool life and wear mechanism when machining Hastelloy C-22HS
K. Kadirgama et al.
WEAR (2011)
SEM and EDS Characterisation of Layering TiOx Growth onto the Cutting Tool Surface in Hard Drilling Processes of Ti-Al-V Alloys
M. Alvarez et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2011)
Tool flank wear prediction in CNC turning of 7075 AL alloy SiC composite
Saeed Zare Chavoshi
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2011)
Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
Abhay Bhatt et al.
TRIBOLOGY INTERNATIONAL (2010)
Effect of various aircraft production drilling procedures on hole quality
W. Carter Ralph et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining
N. A. Abukhshim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Wear behaviour of cemented carbide tools in dry machining of aluminium alloy
G List et al.
WEAR (2005)
Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys
JM Sánchez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Experimental analysis and optimisation of tool wear in dry machining of aluminium alloys
M Nouari et al.
WEAR (2003)
Minimal lubrication machining of aluminium alloys
JF Kelly et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
A SEM and EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al-Cu alloy
MS Carrilero et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
New aspects of development of high strength aluminum alloys for aerospace applications
M Nakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
