相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of filler metal on solidification, microstructure and mechanical properties of dissimilar super duplex/pipeline steel GTA weld
Waris Nawaz Khan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel
H. R. Jafarian et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
The effect of pulse current changes in PCGTAW on microstructural evolution, drastic improvement in mechanical properties, and fracture mode of dissimilar welded joint of AISI 316L-AISI 310S stainless steels
M. Sabzi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The evolution of microstructure and intergranular corrosion resistance of duplex stainless steel joint in multi-pass welding
Yiqi Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Insight into indentation-induced plastic flow in austenitic stainless steel
Xia Wenzhen et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Investigations on mechanical properties and microstructural examination of activated TIG-welded nuclear grade stainless steel
S. Mohan Kumar et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Comparison of metallurgical and mechanical properties of dissimilar joint of AISI 316 and Monel 400 developed by pulsed and constant current gas tungsten arc welding processes
Balram Yelamasetti et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
On the strength of stainless steel fillet welds
M. Fortan et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Fine-grain-embedded dislocation-cell structures for high strength and ductility in additively manufactured steels
Jia Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Selective laser melted stainless steel CX: Role of built orientation on microstructure and micro-mechanical properties
Mehdi Sanjari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650-750 °C
A. Zielinski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure and Corrosion Resistance of Arc Additive Manufactured 316L Stainless Steel
Ke Yang et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2020)
A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application
Gaurav Dak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds
L. H. Guilherme et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A review on high-frequency pulsed arc welding
Zhenmin Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure, mechanical properties and pitting corrosion of TIG weld joints alternative low-cost austenitic stainless steel grade 216
Wichan Chuaiphan et al.
JOURNAL OF ADVANCED JOINING PROCESSES (2020)
Effect of Pulse Currents on Weld Geometry and Angular Distortion in Pulsed GTAW of 304 Stainless Steel Butt Joint
Agus Widyianto et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2020)
The effect of joint shape geometry on the microstructural evolution, fracture toughness, and corrosion behavior of the welded joints of a Hadfield Steel
M. Sabzi et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2019)
Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains
Gang Niu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The Comparison of Cracking Susceptibility of IN52M and IN52MSS Overlay Welds
Min-Yi Chen et al.
METALS (2019)
A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: Mechanisms, microstructure and mechanical properties
Pratishtha Sharma et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Microstructure, Mechanical and Electrochemical Evaluation of Dissimilar low Ni SS and 304 SS using Different Filler Materials
Ankur Bansod et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)
Effect of current pulsing on super 304HCu weld joints
Vinoth M. Kumar et al.
WORLD JOURNAL OF ENGINEERING (2019)
Comparative study of microstructure and properties of low-alloy-steel/nickel-based-alloy interfaces in dissimilar metal weld joints prepared by different GTAW methods
Hongliang Ming et al.
MATERIALS CHARACTERIZATION (2018)
Optimization of spot welding process parameters in dissimilar joint of dual phase steel DP600 and AISI 304 stainless steel to achieve the highest level of shear-tensile strength
S. H. Mousavi Anijdan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Ultrasonic vibration assisted laser welding of nickel-based alloy and Austenite stainless steel
Siyu Zhou et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Post weld heat treatment of hypereutectoid hadfield steel: Characterization and control of microstructure, phase equilibrium, mechanical properties and fracture mode of welding joint
Masoud Sabzi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Drastic improvement in mechanical properties and weldability of 316L stainless steel weld joints by using electromagnetic vibration during GTAW process
Masoud Sabzi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
The Effect of Heat Treatment Process Parameters on Mechanical Properties, Precipitation, Fatigue Life, and Fracture Mode of an Austenitic Mn Hadfield Steel
S. H. Mousavi Anijdan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Investigation on un-peened and laser shock peened dissimilar weldments of Inconel 600 and AISI 316L fabricated using activated-TIG welding technique
G. Chandrasekar et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Microstructural and Mechanical Characterization of Dissimilar Metal Welding of Inconel 625 and AISI 316L
Fatih Dokme et al.
METALS (2018)
Effect of Pulsed Current Gas Tungsten Arc Process on the Dissimilar Weldments between Nickel-based Superalloy/Austenitic Stainless Steel
Sumitra Sharma et al.
ISIJ INTERNATIONAL (2017)
Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments Between Hastelloy C-276/AISI 321 Austenitic Stainless Steel
Sumitra Sharma et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of surface laser treatments on microstructure, tension, and fatigue behavior of AISI 316LVM biomedical wires
Hossein Lavvafi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Through-thickness microstructure and mechanical properties of electron beam welded 20 mm thick AISI 316L austenitic stainless steel
M. Alali et al.
MATERIALS & DESIGN (2017)
Microstructure and Low-Temperature Mechanical Properties of 304 Stainless Steel Joints by PAW plus GTAW Combined Welding
Kun Liu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Study on the microstructure, mechanical properties and corrosion behaviour of S355JR/316L dissimilar welded joint prepared by gas tungsten arc welding multi-pass welding process
B. -S. Huang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)
Effects of filler metals on the segregation, mechanical properties and hot corrosion behaviour of pulsed current gas tungsten arc welded super-austenitic stainless steel
K. Devendranath Ramkumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Monte Carlo simulation and experimental measurements of grain growth in the heat affected zone of 304 stainless steel during multipass welding
Xizhang Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Characterization of microstructure and mechanical properties of continuous and pulsed current gas tungsten arc welded superaustenitic stainless steel
K. Devendranath Ramkumar et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel
G. Sayiram et al.
MATERIALS CHARACTERIZATION (2015)
Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints
Moganraj Arivarasu et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Metallurgical Characterization and Diffusion Studies of Successively Buttered Deposit of Ni-Fe Alloy and Inconel on SA508 Ferritic Steel
Dinesh Rathod et al.
ISIJ INTERNATIONAL (2014)
Slip planes in bcc transition metals
C. R. Weinberger et al.
INTERNATIONAL MATERIALS REVIEWS (2013)
Solidification Behavior and Weldability of Dissimilar Welds Between a Cr-Free, Ni-Cu Welding Consumable and Type 304L Austenitic Stainless Steel
Jeffrey W. Sowards et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
N. Arivazhagan et al.
MATERIALS & DESIGN (2011)
Optimizing the pulsed current GTAW parameters to attain maximum impact toughness
M. Balasubramanian et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
分享论文
