相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Study on aluminum alloy joints welded with nano-treated Al-Mg-Mn filler wire
Narayanan Murali et al.
MATERIALS LETTERS (2021)
Mechanical properties of solution heat treated Al-Zn-Mg-Cu (7075) alloy under different cooling conditions: Analysis with full field measurement and finite element modeling
Chanmi Moon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure and mechanical properties of 7055 Al alloy prepared under different sintering conditions using powder by-products
Tao Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Solidification cracking susceptibility of quaternary aluminium alloys
Jiangwei Liu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)
Investigate on the phase interfaces and performance evaluation of TiB2p/Al-Si-Cu-Zn (T6) composites
Shuaiying Xi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Effect of pretreatment on microstructural stability and mechanical property in a spray formed Al-Zn-Mg-Cu alloy
Zhiping Wang et al.
MATERIALS & DESIGN (2021)
Microstructure evolution during homogenization and hot workability of 7055 aluminum alloy produced by twin-roll casting
Xiaoming Qian et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Nano-carbide strengthened as-welded joint for precipitation-hardened austenitic Fe-Mn-Al-C lightweight alloys
H. Y. Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Effects of ultrasound assisted solidificaiton on the microstructure and mechanical properties of nano-sized TiB2/Al-4.5Cu composites
Zhiwei Liu et al.
MATERIALIA (2021)
Improve the quality of 1060Al/Q235 explosive composite plate by friction stir stir processing
Jian Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Applying the ultrasonic vibration during TIG welding as a promising approach for the development of nanoparticle dispersion strengthened aluminum weldments
M. Fattahi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effects of Multi-Pass Friction Stir Processing on Microstructures and Mechanical Properties of the 1060Al/Q235 Composite Plate
Jian Wang et al.
METALS (2020)
Effect of contact solid solution treatment on peak aging of Al-Zn-Mg-Cu alloys
Zhiqiang Zhang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Strengthening mechanism of TiC/Al composites using Al-Ti-C/CNTs with doping alloying elements (Mg, Zn and Cu)
Hongyu Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of solution-treating temperature on the intergranular corrosion of a peak-aged Al-Zn-Mg-Cu alloy
Zhixiu Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Numerical Simulation and Experimental Investigation on Electron Beam Welding of Spray-Formed 7055 Aluminum Alloy
Shaogang Wang et al.
METALS (2020)
Microstructural characterization and mechanical properties of in situ cast nanocomposites Al/TiC type
Anna Wojcik et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Design, microstructure and high temperature properties of in-situ Al3Ti and nano-Al2O3 reinforced 2024Al matrix composites from Al-TiO2 system
Z. L. Chao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Investigation on friction stir welding of hybrid composites fabricated on Al-Zn-Mg-Cu alloy through friction stir processing
Namrata Gangil et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Tensile properties and strengthening effects of Al 3003 alloy weldment reinforced with TiO2 nanoparticles
K. R. Ramkumar et al.
COMPOSITES PART B-ENGINEERING (2019)
Microstructure and mechanical properties of heat affected zone in multi-pass GMA welded Al-Zn-Mg-Cu alloy
Jia-liang Zhou et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075
Maximilian Sokoluk et al.
NATURE COMMUNICATIONS (2019)
The influence of nanoparticles on dendritic grain growth in Mg alloys
Enyu Guo et al.
ACTA MATERIALIA (2018)
Al-TiB2 micro/nanocomposites: Particle capture investigations, strengthening mechanisms and mathematical modelling of mechanical properties
Mohammad Karbalaei Akbari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evolution of microstructure and mechanical properties of A1-5 wt% Ti composite fabricated by P/M and hot extrusion: Effect of heat treatment
Alireza Rezaei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Nanoparticle-induced unusual melting and solidification behaviours of metals
Chao Ma et al.
NATURE COMMUNICATIONS (2017)
Microstructure and mechanical properties of Al/ZrC/TiC hybrid nanocomposite filler metals of tungsten inert gas welding fabricated by accumulative roll bonding
E. Ahmadi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
MicrostrUcture and mechanical behaviour of in situ fabricated AA6061-TiC metal matrix composites
Gunderi Siddeshwara Pradeep Kumar et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2017)
On the Microstructural and Mechanical Characterization of Hybrid Laser-Welded Al-Zn-Mg-Cu Alloys
S. C. Wu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Effectiveness of cold metal transfer process for welding 7075 aluminium alloys
A. Elrefaey
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2015)
Nanoparticle-Induced Superior Hot Tearing Resistance of A206 Alloy
Hongseok Choi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Wetting of TiC by molten Al at 1123-1323 K
Qiaoli Lin et al.
ACTA MATERIALIA (2011)
Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing
Q. Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Influences of pulsed current welding and post weld aging treatment on fatigue crack growth behaviour of AA7075 aluminium alloy joints
V. Balasubramanian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Effect of pulsed current and post weld aging treatment on tensile properties of argon arc welded high strength aluminium alloy
V. Balasubramanian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Tensile fracture behavior in CO2 laser beam welds of 7075-T6 aluminum alloy
C Liu et al.
MATERIALS & DESIGN (2004)
Development of new high strength Al-Sc filler wires for fusion welding 7000 series aluminium aerospace alloys
AF Norman et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
分享论文
