相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Surface strengthening and grain refinement of AZ31B magnesium alloy by ultrasonic cavitation modification
Linzheng Ye et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
Degradation of Armco iron caused by cavitation: Part II-Correlation with stress analysis
A. K. Krella et al.
ENGINEERING FAILURE ANALYSIS (2021)
Understanding the roles of deformation-induced martensite of 304 stainless steel in different stages of cavitation erosion
L. M. Zhang et al.
TRIBOLOGY INTERNATIONAL (2021)
Cavitation erosion behavior of high-nitrogen austenitic stainless steel: Effect and design of grain-boundary characteristics
Zhenhua Wang et al.
MATERIALS & DESIGN (2021)
Cavitation erosion of monolayer PVD coatings-An influence of deposition technique on the degradation process
A. K. Krella
WEAR (2021)
Micromagnetic characteristic changes and mechanism induced by plastic deformation of 304 austenitic stainless steel
Yi Liu et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Chloride-induced alterations of the passive film on 316L stainless steel and blocking effect of pre-passivation
Zuocheng Wang et al.
ELECTROCHIMICA ACTA (2020)
Effect of strain and strain rate on the development of deformation heterogeneity during tensile deformation of a solution annealed 304 LN austenitic stainless steel: An EBSD study
Amrita Kundu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Cavitation erosion mechanisms in Co-based coatings exposed to seawater Cavitation erosion mechanisms in Co-based coatings exposed to seawater
Guoliang Hou et al.
ULTRASONICS SONOCHEMISTRY (2020)
In-situ SEM observations of ultrasonic cavitation erosion behavior of HVOF-sprayed coatings
Haijun Zhang et al.
ULTRASONICS SONOCHEMISTRY (2020)
Improved mechanical properties and fracture mechanism of C/C composites with salt treatment monitored by synchrotron-based in-situ tensile XRD
Shanglei Feng et al.
COMPOSITES PART B-ENGINEERING (2020)
The coupling effect of immersion corrosion and cavitation erosion of NiCoCrAlYTa coatings in artificial seawater
Enkang Hao et al.
CORROSION SCIENCE (2020)
In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T7651
Haipeng Song et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Transmission X ray diffraction characterization of deformation induced martensite in 301 and 304 stainless steels rolled at 77K: Role of grain size
Yusuke Izuta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Damage characteristics and surface description of near-wall materials subjected to ultrasonic cavitation
Linzheng Ye et al.
ULTRASONICS SONOCHEMISTRY (2020)
Direct correlation between martensitic transformation and incubation-acceleration transition in solution-treated AISI 304 austenitic stainless steel cavitation
L. L. Santos et al.
WEAR (2020)
In-situ SEM investigation on fracture behavior of GTD222 superalloy during tensile process at 760 °C
Guoliang Zhu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effects of applying tensile stress during annealing on the GMI and induced anisotropy of Fe-Cu-Nb-Si-B alloys
Raymond Kwesi Nutor et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
In-situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature
Zhen Wang et al.
ENGINEERING FRACTURE MECHANICS (2019)
Novel approach to investment casting of heat-resistant steel turbine blades for aircraft engines
Pei-Hsing Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Crack propagation behavior of die-cast AlSiMgMn alloys with in-situ SEM observation and finite element simulation
Fei Liu et al.
MATERIALS TODAY COMMUNICATIONS (2019)
Cavitation Erosion Behavior of 316L Stainless Steel
Guiyan Gao et al.
TRIBOLOGY LETTERS (2019)
Ultrasonic cavitation erosion mechanism and mathematical model of HVOF sprayed Fe-based amorphous/nanocrystalline coatings
Lei Qiao et al.
ULTRASONICS SONOCHEMISTRY (2019)
Stress corrosion cracking failure of a SS 316L high pressure heater tube
M. Ananda Rao et al.
ENGINEERING FAILURE ANALYSIS (2018)
On the role of internal defects in the fatigue damage process of a cast Al-Si-Cu alloy
A. Brueckner-Foit et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A new methodology to prepare ceramic-organic composite coatings with good cavitation erosion resistance
Wen Deng et al.
ULTRASONICS SONOCHEMISTRY (2018)
Effect of cavitation intensity on degradation of X6CrNiTi18-10 stainless steel
A. K. Krella et al.
WEAR (2018)
On the hardness of high carbon ferrous martensite
J. Mola et al.
20TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING (2018)
Degradation of AlMg2 aluminium alloy caused by cavitation - An effect of cavitation intensity
Alicja Krystyna Krella
MATERIALS CHARACTERIZATION (2017)
Monitoring of chloride stress corrosion cracking of austenitic stainless steel: identification of the phases of the corrosion process and use of a modified accelerated test
Fabienne Delaunois et al.
CORROSION SCIENCE (2016)
Effect of Spray Particle Velocity on Cavitation Erosion Resistance Characteristics of HVOF and HVAF Processed 86WC-10Co4Cr Hydro Turbine Coatings
R. K. Kumar et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis
Long Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Cavitation erosion of plasma-sprayed CoMoCrSi coatings
Yan Wang et al.
TRIBOLOGY INTERNATIONAL (2016)
Cavitation erosion mechanisms in stainless steels and in composite metal-ceramic HVOF coatings
Gabriel Taillon et al.
WEAR (2016)
The Effects of Casting Porosity on the Tensile Behavior of Investment Cast 17-4PH Stainless Steel
D. F. Susan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Characterization and Prediction of Microporosity Defect in Sand Cast WE54 Alloy Castings
Jilin Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
In-situ SEM observations of tensile deformation of the lamellar microstructure in TC21 titanium alloy
Hui Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of Ni and Mn on the Cavitation Erosion Resistance of Fe-Cr-C-Ni/Mn Austenitic Alloys
Myung Chul Park et al.
TRIBOLOGY LETTERS (2013)
Study of Cavitation Erosion Pits on 1045 Carbon Steel Surface in Corrosive Waters
S. A. Karrab et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2012)
On the impact of ultrasonic cavitation bubbles
A. Abdullah et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2012)
Cavitation erosion resistance of stellite alloy weld overlays
Shuji Hattori et al.
WEAR (2009)
Cavitation characteristics of pit structure in ultrasonic field
Bai LiXin et al.
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2009)
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
J. Talonen et al.
ACTA MATERIALIA (2007)
Study on fracture behavior of particulate reinforced magnesium matrix composite using in situ SEM
X. J. Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution
C. T. Liu et al.
CORROSION SCIENCE (2007)
Cavitation erosion behaviour of Zr-based bulk metallic glasses
D. Drozdz et al.
WEAR (2007)
Cavitation erosion behaviour of 20SiMn low alloy steel in Na2SO4 and NaHCO3 solutions
Sheng Li Jiang et al.
CORROSION SCIENCE (2006)
TEM investigation of intergranular stress corrosion cracking for 316 stainless steel in PWR environment
YZ Huang et al.
ACTA MATERIALIA (2006)
Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period
A Krella
WEAR (2005)
Improvement of the cavitation erosion resistance of an AISI 304L austenitic stainless steel by high temperature gas nitriding
JF dos Santos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Cavitation erosion behavior of Cr-Mn-N stainless steels in. comparison with 0Cr13Ni5Mo stainless steel
W Liu et al.
WEAR (2003)
Ductile fracture of duplex stainless steel with casting defects
P Hausild et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2001)
分享论文
