期刊
MATERIALS & DESIGN
卷 213, 期 -, 页码 -出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.matdes.2021.110356
关键词
Refractory high-entropy alloys; Nitrogen doping; Solid solution strengthening; Mechanical properties; Dislocation slip
资金
- National Natural Science Founda-tion of China [52171166, 52101194, 11972372, U20A20231]
- Fundamental Research Funds for the Central Universities [531118010621]
- Postgraduate Scientific Research Innovation Project of Hunan Province [CX20210076]
- State Key Laboratory of Powder Metallurgy, Central South University, Changsha, China
Refractory high-entropy alloys (HEAs) doped with nitrogen show high strength and ductility properties. The optimal performance is achieved with 0.6% nitrogen doping. Isothermal annealing at different temperatures affects the mechanical properties of the alloys, with slight improvements in both strength and ductility observed at 1000°C due to various strengthening mechanisms.
Refractory high-entropy alloys (HEAs) usually exhibit high strength but limited ductility. Here, we report high strength (-1334 MPa) and large ductility (-18.8%) in nitrogen-doped TiZrNbTa HEAs. The microstructural evolution and the corresponding mechanical properties of the as-cast/annealed nitrogen-doped HEAs were investigated. All as-cast (TiZrNbTa)100-xNx (x = 0, 0.3, 0.6) HEAs exhibit a single-phase body-centred cubic structure. Interstitial strengthening contributes to the enhanced strength. The improved ductility of the 0.6 at.% nitrogen-doped HEA originates from the promoted planar dislocation slip inside grains. Spinodal decomposition and grain boundary (Zr, N)-enriched precipitates emerge when the nitrogen content is 0.9 at.%, which results in significant embrittlement. Isothermal annealing of the 0.6 at.% nitrogen-doped HEA at 800 degrees C to 1200 degrees C was conducted to further improve the mechanical performance. The complicated precipitates and grain boundary impurity segregation in the alloys annealed at 800 degrees C and 1200 degrees C lead to deteriorated strength and ductility. However, in the alloy annealed at 1000 degrees C, a slight increase in both strength and ductility appears due to solid solution strengthening, in situ grain refinement and promoted dislocation cross slip, which is induced by the coherent boundaries. This work provides a promising conduit to approach high strength and ductility in HEAs. (c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据