相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of dispersing single and hybrid nanoparticles on tribological, thermo-physical, and stability characteristics of lubricants: a review
C. Pownraj et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)
Micromechanics of machining and wear in hard and brittle materials
Brian R. Lawn et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)
pH-dependent lubrication mechanism of graphene oxide aqueous lubricants on the strip surface during cold rolling
Weixin Meng et al.
SURFACE AND INTERFACE ANALYSIS (2021)
Ultra-precision grinding of Gd3Ga5O12 crystals with graphene oxide coolant: Material deformation mechanism and performance evaluation
Chen Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Tribological Behaviors and Lubrication Mechanism of Water-based MoO3 Nanofluid during Cold Rolling Process
Jianlin Sun et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Science and art of ductile grinding of brittle solids
Han Huang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
A novel lapping process for single-crystal sapphire using hybrid nanoparticle suspensions
Shuiquan Huang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Polishing performance and mechanism of a water-based nanosuspension using diamond particles and GO nanosheets as additives
Shuiquan Huang et al.
TRIBOLOGY INTERNATIONAL (2021)
Oil mist concentration and machining characteristics of SiO2 water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling
Tao Lv et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Study on the relationship between the tribological properties and oxidation degree of graphene derivatives in O/W emulsion
Yinglei Wu et al.
TRIBOLOGY INTERNATIONAL (2021)
A study of water-based lubricant with a mixture of polyphosphate and nano-TiO2 as additives for hot rolling process
Long Wang et al.
WEAR (2021)
Roughness-dependent tribological characteristics of water-based GO suspensions with ZrO2 and TiO2 nanoparticles as additives
Shuiquan Huang et al.
TRIBOLOGY INTERNATIONAL (2021)
Effects of compound diamond slurry with graphene for lapping of sapphire wafers
Hsien-Kuang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of Al2O3 and TiO2 nanofluid on hard turning performance
Ramanuj Kumar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Machining characteristics and mechanism of GO/SiO2 nanoslurries in fixed abrasive lapping
Shuiquan Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Measurement of machining forces and surface roughness in turning of AISI 304 steel using alumina-MWCNT hybrid nanoparticles enriched cutting fluid
Anuj Kumar Sharma et al.
MEASUREMENT (2020)
Lubricating performances of graphene oxide and onion-like carbon as water-based lubricant additives for smooth and sand-blasted steel discs
Fenghua Su et al.
FRICTION (2020)
Role of nanoparticle materials as water-based lubricant additives for ceramics
Yuxiao Cui et al.
TRIBOLOGY INTERNATIONAL (2020)
Milling of Ti-6Al-4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining
Muhammad Jamil et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Investigation of machining Ti-6Al-4V with graphene oxide nanofluids: Tool wear, cutting forces and cutting vibration
Shuang Yi et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Tribological characteristics and micromilling performance of nanoparticle enhanced water based cutting fluids in minimum quantity lubrication
A. Sravan Kumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Environmental behaviour and ecotoxicity of cationic surfactants towards marine organisms
O. Kaczerewska et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
The Enhanced Lubrication of Water-Based Cutting Fluid by Functionalized GO
Shaoqing Xue et al.
TRIBOLOGY LETTERS (2020)
Superior lubrication performance of MoS2-Al2O3 composite nanofluid in strips hot rolling
Jiaqi He et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Recycling prospect and sustainable lubrication mechanism of water-based MoS2 nano-lubricant for steel cold rolling process
Meng Yanan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives
Xiaoming Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Eco-Friendly Water-Based Nanolubricants for Industrial-Scale Hot Steel Rolling
Hui Wu et al.
LUBRICANTS (2020)
Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium
Mingshuai Huo et al.
TRIBOLOGY INTERNATIONAL (2020)
Preparation and evaluation of a stable CNT-water based nano cutting fluid for machining hard-to-cut material
Israt Sharmin et al.
SN APPLIED SCIENCES (2020)
Improvement in the Hard Milling of AISI D2 Steel under the MQCL Condition Using Emulsion-Dispersed MoS2 Nanosheets
Pham Quang Dong et al.
LUBRICANTS (2020)
Experimental investigation of graphene nanoplatelets-based minimum quantity lubrication in grinding Inconel 718
R. Bhanu Pavan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Friction reduction of water based lubricant with highly dispersed functional MoS2 nanosheets
Yongxia Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)
Assessment of water-based fluids with additives in grinding disc cutting process
Jing Ni et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Dispersion Stability and Lubrication Mechanism of Nanolubricants
Nurul Farhanah Azman et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Tribological performances of SiO2/graphene combinations as water-based lubricant additives for magnesium alloy rolling
Hongmei Xie et al.
APPLIED SURFACE SCIENCE (2019)
Recent development trends in metal forming
Z. Gronostajski et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Superfinishing of polycrystalline YAG ceramic by nanodiamond slurry
Hirofumi Suzuki et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
A polishing method for single crystal diamond (100) plane based on nano silica and nano nickel powder
Zhipeng Cui et al.
DIAMOND AND RELATED MATERIALS (2019)
Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy
Chetan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Synergistic tribological behaviors of graphene oxide and nanodiamond as lubricating additives in water
Pu Wu et al.
TRIBOLOGY INTERNATIONAL (2019)
Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures
Hui Wu et al.
WEAR (2019)
Effects of reinforced nanoparticles with surfactant on surface quality and chip formation morphology in MQL-turning of superalloys
S. H. Musavi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Synergistic tribological performance of a water based lubricant using graphene oxide and alumina hybrid nanoparticles as additives
Shuiquan Huang et al.
TRIBOLOGY INTERNATIONAL (2019)
A Simple Preparation of HDA-CuS Nanoparticles and Their Tribological Properties as a Water-Based Lubrication Additive
Junhua Zhao et al.
TRIBOLOGY LETTERS (2019)
Polishing single-crystal silicon carbide with porous structure diamond and graphene-TiO2 slurries
Ming Yi Tsai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids
Anil Kumar et al.
CERAMICS INTERNATIONAL (2019)
Synthesis of water-soluble Cu nanoparticles and evaluation of their tribological properties and thermal conductivity as a water-based additive
Junhua Zhao et al.
FRICTION (2019)
Performance evaluation of graphene oxide nanosheet water coolants in the grinding of semiconductor substrates
Xuliang Li et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Performance appraisal of various nanofluids during hard machining of AISI 4340 steel
Anshuman Das et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
PEI-RGO nanosheets as a nanoadditive for enhancing the tribological properties of water-based lubricants
Chengcheng Liu et al.
TRIBOLOGY INTERNATIONAL (2019)
Dispersion of Nanoparticles in Lubricating Oil: A Critical Review
Yan Chen et al.
LUBRICANTS (2019)
Evaluation of performance of nanofluid using multiwalled carbon nanotubes for machining of Ti-6AL-4V
Neelesh Kumar Sahu et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Experimental evaluation on the effect of electrostatic minimum quantity lubrication (EMQL) in end milling of stainless steels
Shuiquan Huang et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Smoking Cessation and Subsequent Risk of Type 2 Diabetes in Three Large Prospective Cohort Studies of Americans
Yang Hu et al.
CIRCULATION (2018)
Synthesis of ionic liquid functionalized graphene oxides and their tribological property under water lubrication
Weiwei Tang et al.
FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2018)
Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
Tao Lv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Study on high efficient sapphire wafer processing by coupling SG-mechanical polishing and GLA-CMP
Yongchao Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy
Farzad Pashmforoush et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel
Wenzhen Xia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Nanogrinding induced surface and deformation mechanism of single crystal β-Ga2O3
Shang Gao et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2018)
Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel
Hui Wu et al.
TRIBOLOGY INTERNATIONAL (2018)
Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation
Anuj Kumar Sharma et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological Characteristics of Aqueous Graphene Oxide, Graphitic Carbon Nitride, and Their Mixed Suspensions
Anshun He et al.
TRIBOLOGY LETTERS (2018)
Analysisofoil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles
Wenzhen Xia et al.
WEAR (2018)
Tribological Behaviors of Graphene and Graphene Oxide as Water-Based Lubricant Additives for Magnesium Alloy/Steel Contacts
Hongmei Xie et al.
MATERIALS (2018)
Effects of Machining and Oil Mist Parameters on Electrostatic Minimum Quantity Lubrication-EMQL Turning Process
Shuiquan Huang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2018)
The Role of Nano-TiO2 Lubricating Fluid on the Hot Rolled Surface and Metallographic Structure of SS41 Steel
Yanan Meng et al.
NANOMATERIALS (2018)
Preparation, characterization and lubrication performances of graphene oxide-TiO2 nanofluid in rolling strips
Shaonan Du et al.
CARBON (2018)
An investigation on application of nano-fluids in high speed grinding of sintered alumina
Amit Choudhary et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Performance Evaluation and Lubrication Mechanism of Water-Based Nanolubricants Containing Nano-TiO2 in Hot Steel Rolling
Hui Wu et al.
LUBRICANTS (2018)
PEGlated graphene as nanoadditive for enhancing the tribological properties of water-based lubricants
Yiwen Hu et al.
CARBON (2018)
Grinding of Ti-6Al-4V Under Small Quantity Cooling Lubrication Environment Using Alumina and MWCNT Nanofluids
Sourabh Paul et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Experimental evaluation of coolant-lubricant properties of nanofluids in ultrasonic assistant MQL grinding
F. Rabiei et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
An overview of current status of cutting fluids and cooling techniques of turning hard steel
Pay Jun Liew et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
Manoj Kumar Sinha et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning
Rabesh Kumar Singh et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Performance of multi-walled carbon nanotube-based nanofluid in turning operation
Roja Abraham Raju et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Effects of nano-SiO2 as water-based lubricant additive on surface qualities of strips after hot rolling
Yueyue Bao et al.
TRIBOLOGY INTERNATIONAL (2017)
The pH-dependent structural and tribological behaviour of aqueous graphene oxide suspensions
Anshun He et al.
TRIBOLOGY INTERNATIONAL (2017)
A study of the tribological behaviour of TiO2 nano-additive water-based lubricants
Hui Wu et al.
TRIBOLOGY INTERNATIONAL (2017)
Tribological Performance and Lubrication Mechanism of Alumina Nanoparticle Water-Based Suspensions in Ball-on-Three-Plate Testing
Anshun He et al.
TRIBOLOGY LETTERS (2017)
Performance and mechanisms of graphene oxide suspended cutting fluid in the drilling of titanium alloy Ti-6Al-4V
Shuang Yi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel
Anuj Kumar Sharma et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel
Hui Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Tribological performances of multilayer-MoS2 nanoparticles in water-based lubricating fluid
B. M. Zhang et al.
17TH IUMRS INTERNATIONAL CONFERENCE IN ASIA (IUMRS-ICA 2016) (2017)
Diamond Lapping of Sapphire Wafer with Addition of Graphene in Slurry
Hsien-Kuang Liu et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Grinding performance improvement of silicon nitride ceramics by utilizing nanofluids
Anil Kumar et al.
CERAMICS INTERNATIONAL (2017)
Synthesis of ionic liquid decorated muti-walled carbon nanotubes as the favorable water-based lubricant additives
Baogang Wang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)
Recent advances in micro- and nano-machining technologies
Shang Gao et al.
FRONTIERS OF MECHANICAL ENGINEERING (2017)
In-situ exfoliated graphene for high-performance water-based lubricants
Shuaishuai Liang et al.
CARBON (2016)
Experimental investigation of flank wear in end milling of aluminum alloy with water-based TiO2 nanofluid lubricant in minimum quantity lubrication technique
M. S. Najiha et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Performance of water-based TiO2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
M. S. Najiha et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Tribological performance of nanoparticles as lubricating oil additives
M. Gulzar et al.
JOURNAL OF NANOPARTICLE RESEARCH (2016)
Application of nanofluids during minimum quantity lubrication: A case study in turning process
Chetan et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological behavior of Fe3O4/MoS2 nanocomposites additives in aqueous and oil phase media
Xiaojing Zheng et al.
TRIBOLOGY INTERNATIONAL (2016)
Roles of nanoparticles in oil lubrication
Wei Dai et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological properties of carbon nanotubes as lubricant additive in oil and water for a wheel-rail system
Jesus Antonio Carlos Cornelio et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Preparation and Tribological Properties of Lanthanum Trifluoride Nanoparticles-Decorated Graphene Oxide Nanosheets
Xiao Hou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of nanofluids
Dinesh Setti et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Grinding performance and self-lubrication mechanism of phenolic resin-bonded grinding wheel filled with inclusion complex of β-cyclodextrin and dialkyl pentasulfide
Xuefeng Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Synthesis of MWCNT nanofluid and evaluation of its potential besides soluble oil as micro cooling-lubrication medium in SQL grinding
K. ManojKumar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Tribological properties of monolayer graphene oxide sheets as water-based lubricant additives
Hiroshi Kinoshita et al.
CARBON (2014)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Graphene: a new emerging lubricant
Diana Berman et al.
MATERIALS TODAY (2014)
Nanofluids as a potential solution for Minimum Quantity Lubrication: A review
R. R. Srikant et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive
Chunli Zhang et al.
TRIBOLOGY LETTERS (2014)
Brittle-ductile transition during diamond turning of single crystal silicon carbide
Saurav Goel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Tool life and wear mechanisms in high speed machining of Ti-6Al-4V alloy with PCD tools under various coolant pressures
Rosemar B. da Silva et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Tribological Properties of Stearic Acid Modified Multi-Walled Carbon Nanotubes in Water
Yitian Peng et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2013)
A comparative study between graphene oxide and diamond nanoparticles as water-based lubricating additives
Liu YuHong et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2013)
A Study of Tribological Properties of Water-Based Ceria Nanofluids
Chuanli Zhao et al.
TRIBOLOGY TRANSACTIONS (2013)
Preparation and tribological properties of water-soluble copper/silica nanocomposite as a water-based lubricant additive
Chunli Zhang et al.
APPLIED SURFACE SCIENCE (2012)
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
A. Shokrani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Friction and Wear Characteristics of Water-Based ZnO and Al2O3 Nanofluids
Luan Gara et al.
TRIBOLOGY TRANSACTIONS (2012)
Frictional behavior of oxide graphene nanosheets as water-base lubricant additive
Hao-Jie Song et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Graphene Colloidal Suspensions as High Performance Semi-Synthetic Metal-Working Fluids
J. Samuel et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Experimental study on fabrication and evaluation of micro pyramid-structured silicon surface using a V-tip of diamond grinding wheel
J. Xie et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Experimental stability analysis of different water-based nanofluids
Laura Fedele et al.
NANOSCALE RESEARCH LETTERS (2011)
Hybrid polishing mechanism of single crystal SiC using mixed abrasive slurry (MAS)
H. S. Lee et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Analysis of tribological feature of the oxide scale in hot strip rolling
Z. Y. Jiang et al.
TRIBOLOGY INTERNATIONAL (2010)
Tribological properties of additives for water-based lubricants
A. Tomala et al.
WEAR (2010)
A review on development of nanofluid preparation and characterization
Yanjiao Li et al.
POWDER TECHNOLOGY (2009)
Brittle materials in nano-abrasive fabrication of optical mirror-surfaces
Ling Yin et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
分享论文
