相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: Twins and stacking faults in FCC and dislocations in BCC
Payam Edalati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Crack-resistant σ/FCC interfaces in the Fe40Mn40Co10Cr10 high entropy alloy with the dispersed σ-phase
Donggyun You et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Deformation-induced grain boundary segregation mediated high-strain rate superplasticity in medium entropy alloy
Peyman Asghari-Rad et al.
SCRIPTA MATERIALIA (2022)
Deformation induced twinning in hcp/bcc Al10Hf25Nb5Sc10Ti25Zr25 high entropy alloy-microstructure and mechanical properties
L. Rogal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Ultrahigh hardness in nanostructured dual-phase high-entropy alloy AlCrFeCoNiNb developed by high-pressure torsion
Payam Edalati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion
Parisa Edalati et al.
MATERIALS LETTERS (2021)
Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The Effect of Zr Addition on Melting Temperature, Microstructure, Recrystallization and Mechanical Properties of a Cantor High Entropy Alloy
Enrico Gianfranco Campari et al.
MATERIALS (2021)
Grain Boundary Wetting by a Second Solid Phase in the High Entropy Alloys: A Review
Boris B. Straumal et al.
MATERIALS (2021)
Preparation of Bulk TiZrNbMoV and NbTiAlTaV High-Entropy Alloys by Powder Sintering
Yaqi Wu et al.
METALS (2021)
The Grain Boundary Wetting Phenomena in the Ti-Containing High-Entropy Alloys: A Review
Boris B. Straumal et al.
METALS (2021)
Grain Boundary Wetting Phenomena in High Entropy Alloys Containing Nitrides, Carbides, Borides, Silicides, and Hydrogen: A Review
Boris Straumal et al.
CRYSTALS (2021)
Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment
H. T. Jeong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing
A. K. Chandan et al.
MATERIALS CHARACTERIZATION (2021)
Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures
S. Picak et al.
SCRIPTA MATERIALIA (2021)
Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy
Shiteng Zhao et al.
SCIENCE ADVANCES (2021)
Nonequilibrium phase transformations in alloys under severe plastic deformation
I. K. Razumov et al.
PHYSICS-USPEKHI (2020)
High-entropy ceramics
Corey Oses et al.
NATURE REVIEWS MATERIALS (2020)
High pressure torsion of Cu-Ag and Cu-Sn alloys: Limits for solubility and dissolution
B. B. Straumal et al.
ACTA MATERIALIA (2020)
The Formation of the ω Phase in the Titanium-iron System under Shear Deformation
B. B. Straumal et al.
JETP LETTERS (2020)
Thermodynamics-kinetics of twinning/martensitic transformation in Fe50Mn30Co10Cr10 high-entropy alloy during adiabatic shearing
Shuangjun Yang et al.
SCRIPTA MATERIALIA (2020)
Amorphous-Nanocrystalline Composites Prepared by High-Pressure Torsion
Inga Permyakova et al.
METALS (2020)
Effect of Cobalt-Content on Mechanical Properties of Non-Equiatomic Co-Cr-Ni Medium Entropy Alloys
Shuhei Yoshida et al.
MATERIALS TRANSACTIONS (2020)
Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy
Werner Skrotzki et al.
CRYSTALS (2020)
Mechanical instability and tensile properties of TiZrHfNbTa high entropy alloy at cryogenic temperatures
Shubin Wang et al.
ACTA MATERIALIA (2020)
Design of high-ductile medium entropy alloys for dental implants
Shubin Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Microstructure and Mechanical Properties of Co-Cr-Mo-Si-Y-Zr High Entropy Alloy
Karsten Glowka et al.
METALS (2020)
Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion
Abdelkader Hanna et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Dissolution of Ag Precipitates in the Cu-8wt.%Ag Alloy Deformed by High Pressure Torsion
Anna Korneva et al.
MATERIALS (2019)
Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system
Prashant K. Sarswat et al.
APPLIED SURFACE SCIENCE (2019)
Phase transitions in copper-silver alloys under high pressure torsion
Boris B. Straumal et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2019)
Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion
Jeno Gubicza et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of alloying on deformation twinning in high entropy alloys
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Phase Transformations in Copper-Tin Solid Solutions at High-Pressure Torsion
B. B. Straumal et al.
JETP LETTERS (2019)
High-pressure torsion of iron with various purity levels and validation of Hall-Petch strengthening mechanism
Robert Tejedor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy
A. Kilmametov et al.
SCRIPTA MATERIALIA (2019)
Competition for impurity atoms between defects and solid solution during high pressure torsion
A. A. Mazilkin et al.
SCRIPTA MATERIALIA (2019)
Elevated temperature corrosion resistance of additive manufactured single phase AlCoFeNiTiV0.9Sm0.1 and AlCoFeNiV0.9Sm0.1 HEAs in a simulated syngas atmosphere
Sayan Sarkar et al.
ADDITIVE MANUFACTURING (2019)
GRAIN BOUNDARY WETTING AND MATERIAL PERFORMANCE IN AN INDUSTRIAL EZ33A Mg CAST ALLOY
A. B. Straumal et al.
ARCHIVES OF METALLURGY AND MATERIALS (2019)
The alpha -> omega and beta -> omega phase transformations in Ti-Fe alloys under high-pressure torsion
A. R. Kilmametov et al.
ACTA MATERIALIA (2018)
Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties
B. Schuh et al.
ACTA MATERIALIA (2018)
Transformation Pathway upon Heating of Ti-Fe Alloys Deformed by High-Pressure Torsion
Mario J. Kriegel et al.
ADVANCED ENGINEERING MATERIALS (2018)
Bulk Nanocrystalline Ferrite Stabilized through Grain Boundary Carbon Segregation
Yulia Ivanisenko et al.
ADVANCED ENGINEERING MATERIALS (2018)
An EBSD analysis of Fe-36% Ni alloy processed by HPT at ambient and a warm temperature
Kamel Tirsatine et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Cluster structure in amorphous Ti-Ni-Cu alloys subjected to high-pressure torsion deformation
D. V. Gunderov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Diffusive and displacive phase transitions in Ti-Fe and Ti-Co alloys under high pressure torsion
B. B. Straumal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
High pressure torsion of a Vitreloy bulk metallic glass near the glass transition temperature
Zsolt Kovacs et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Instabilities of interfaces between dissimilar metals induced by high pressure torsion
R. Kulagin et al.
MATERIALS LETTERS (2018)
Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy
Krzysztof Bryla et al.
MATERIALS LETTERS (2018)
Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion
Yousf Islem Bourezg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and creep behaviour of P92 steel after HPT
Petr Kral et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys
Shima Sabbaghianrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion
P. Bazarnik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of temperature rise on microstructural evolution during high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy
Benjamin Schuh et al.
MATERIALS (2018)
Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 K
Jongun Moon et al.
SCIENTIFIC REPORTS (2018)
Strength enhancement of high entropy alloy HfNbTaTiZr by severe plastic deformation
J. Cizek et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Improvement of strength and ductility of an EZ magnesium alloy by applying two different ECAP concepts to processable initial states
Krzysztof Bryla et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Annealing on Microstructure and Tensile Behavior of CoCrNi Medium Entropy Alloy Processed by High-Pressure Torsion
Praveen Sathiyamoorthi et al.
ENTROPY (2018)
Defects in High Entropy Alloy HfNbTaTiZr Prepared by High Pressure Torsion
F. Lukac et al.
ACTA PHYSICA POLONICA A (2018)
Deformation-Induced Supersaturation in Immiscible Material Systems during High-Pressure Torsion
Karoline Sophie Kormout et al.
ADVANCED ENGINEERING MATERIALS (2017)
Modeling strain and density distributions during high-pressure torsion of pre-compacted powder materials
Roman Kulagin et al.
MATERIALS RESEARCH LETTERS (2017)
Severe plastic deformation driven nanostructure and phase evolution in a Al0.5CoCrFeMnNi dual phase high entropy alloy
T. S. Reddy et al.
INTERMETALLICS (2017)
Phase transitions in Cu-based alloys under high pressure torsion
B. B. Straumal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Formation of nanocrystals in an amorphous Al90Y10alloy
E. Pershina et al.
MATERIALS CHARACTERIZATION (2017)
Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K
Jongun Moon et al.
MATERIALS LETTERS (2017)
HPT-induced shear banding and nanoclustering in a TiNiCu amorphous alloy
E. V. Ubyivovk et al.
MATERIALS LETTERS (2017)
Strengthening of A2024 alloy by high-pressure torsion and subsequent aging
Intan Fadhlina Mohamed et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Cameron L. Tracy et al.
NATURE COMMUNICATIONS (2017)
Effects on hardness and microstructure of AISI 1020 low-carbon steel processed by high-pressure torsion
Diana Maritza Marulanda Cardona et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion
Wenqian Wu et al.
SCIENTIFIC REPORTS (2017)
Structure and Mechanical and Corrosion Properties of a Magnesium Mg-Y-Nd-Zr Alloy after High Pressure Torsion
E. A. Lukyanova et al.
RUSSIAN METALLURGY (2017)
Phase Decomposition of a Single-Phase AlTiVNb High-Entropy Alloy after Severe Plastic Deformation and Annealing
Benjamin Schuh et al.
ADVANCED ENGINEERING MATERIALS (2017)
High-pressure torsion driven phase transformations in Cu-Al-Ni shape memory alloys
B. B. Straumal et al.
ACTA MATERIALIA (2017)
Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion
B. B. Straumal et al.
ACTA MATERIALIA (2017)
Review: grain boundary faceting-roughening phenomena
B. B. Straumal et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures
F. Otto et al.
ACTA MATERIALIA (2016)
Development of a Refractory High Entropy Superalloy
Oleg N. Senkov et al.
ENTROPY (2016)
Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion
Kaveh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation
Hao Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion
Murat Isik et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Phase transformations in a Cu--Cr alloy induced by high pressure torsion
Anna Korneva et al.
MATERIALS CHARACTERIZATION (2016)
Effect of high pressure torsion on microstructure of Cu-Sn alloys with different content of Hume Rothery phase
A. Korneva et al.
MATERIALS CHARACTERIZATION (2016)
Grain refinement of intermetallic compounds in the Cu-Sn system under high pressure torsion
A. Korneva et al.
MATERIALS LETTERS (2016)
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Grain Refinement Mechanism and Evolution of Dislocation Structure of Co-Cr-Mo Alloy Subjected to High-Pressure Torsion
Murat Isik et al.
MATERIALS TRANSACTIONS (2016)
The self-similarity theory of high pressure torsion
Yan Beygelzimer et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2016)
Ferromagnetic behaviour of ZnO: the role of grain boundaries
Boris B. Straumal et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2016)
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
B. Schuh et al.
ACTA MATERIALIA (2015)
Phase Transformations in Ti-Fe Alloys Induced by High-Pressure Torsion
B. B. Straumal et al.
ADVANCED ENGINEERING MATERIALS (2015)
Phase transitions induced by severe plastic deformation: steady-state and equifinality
Boris B. Straumal et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2015)
Transformations of Cu(in) supersaturated solid solutions under high-pressure torsion
B. B. Straumal et al.
MATERIALS LETTERS (2015)
Amorphization of Nd-Fe-B alloy under the action of high-pressure torsion
B. B. Straumal et al.
MATERIALS LETTERS (2015)
Amorphization of crystalline phases in the Nd-Fe-B alloy driven by the high-pressure torsion
B. B. Straumal et al.
MATERIALS LETTERS (2015)
Severe plastic deformation on powder metallurgy Cu-Al-Ni shape memory alloys
G. A. Lopez et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion
Kaveh Edalati et al.
ACTA MATERIALIA (2014)
Increase of Fe solubility in ZnO induced by the grain boundary adsorption
S. G. Protasova et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Phase transitions during high pressure torsion of Cu-Co alloys
B. B. Straumal et al.
MATERIALS LETTERS (2014)
Crystallization features in Al90Y10 amorphous alloy under a various external influence
E. Pershina et al.
MATERIALS LETTERS (2014)
High-pressure torsion of palladium: Hydrogen-induced softening and plasticity in ultrafine grains and hydrogen-induced hardening and embrittlement in coarse grains
Toshifumi Hongo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Nanocrystallization of Zr-Cu-Ni-Al-Au glassy alloys during severe plastic deformation
Masahiro Yamada et al.
6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6) (2014)
Microstructure evolution of Cu-22 % In alloy subjected to the high pressure torsion
A. Korneva et al.
6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6) (2014)
Ferromagnetism of zinc oxide nanograined films
B. B. Straumal et al.
JETP LETTERS (2013)
SPb-induced changes of structure and magnetic properties in the Cu-Co alloys
B. B. Straumal et al.
MATERIALS LETTERS (2013)
Nanocrystal formation, structure and magnetic properties of Fe-Si-B amorphous alloy after deformation
G. Abrosimova et al.
MATERIALS LETTERS (2013)
Effective Temperature of High Pressure Torsion in Zr-Nb Alloys
Boris B. Straumal et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2012)
Deformation-driven formation of equilibrium phases in the Cu-Ni alloys
B. B. Straumal et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Phase transformations in the severely plastically deformed Zr-Nb alloys
B. B. Straumal et al.
MATERIALS LETTERS (2012)
Gradual softening of Al-Zn alloys during high-pressure torsion
A. A. Mazilkin et al.
MATERIALS LETTERS (2012)
High-Pressure Torsion for Pure Chromium and Niobium
Seungwon Lee et al.
MATERIALS TRANSACTIONS (2012)
Equal-Channel Angular Pressing and High-Pressure Torsion of Pure Copper: Evolution of Electrical Conductivity and Hardness with Strain
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2012)
Accelerated Diffusion and Phase Transformations in Co-Cu Alloys Driven by the Severe Plastic Deformation
Boris B. Straumal et al.
MATERIALS TRANSACTIONS (2012)
On the structural and phase transformations in solids induced by severe plastic deformation
E. I. Teitel' et al.
PHYSICS OF METALS AND METALLOGRAPHY (2012)
Ferromagnetism of nanostructured zinc oxide films
B. B. Straumal et al.
PHYSICS OF METALS AND METALLOGRAPHY (2012)
Formation of nanocrystalline structure in the amorphous Ti50Ni25Cu25 alloy upon severe thermomechanical treatment and the size effect of the thermoelastic martensitic B2 a† B19 transformation
V. G. Pushin et al.
PHYSICS OF METALS AND METALLOGRAPHY (2012)
Structure and Properties of Nanograined Fe-C Alloys after Severe Plastic Deformation
Boris B. Straumal et al.
ADVANCED ENGINEERING MATERIALS (2011)
The evolution of the microstructure in amorphous Al85Ce8Ni5Co2 alloy during heat treatment and severe plastic deformation: A comparative study
P. Henits et al.
INTERMETALLICS (2011)
Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion
Tatsuya Miyazaki et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Transmission electron microscopy investigation of boundaries between amorphous grains in Ni50Nb20Y30 alloy
A. A. Mazilkin et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Formation of the nanocrystalline structure in the Ti50Ni25Cu25 shape-memory alloy under severe thermomechanical treatment
V. G. Pushin et al.
PHYSICS OF METALS AND METALLOGRAPHY (2011)
Formation of two amorphous phases in the Ni60Nb18Y22 alloy after high pressure torsion
B. B. Straumal et al.
KOVOVE MATERIALY-METALLIC MATERIALS (2011)
Refractory high-entropy alloys
O. N. Senkov et al.
INTERMETALLICS (2010)
Deformation-induced crystallization in amorphous Al85Ni10La5 alloy
Jens Vierke et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
High-Pressure Torsion of Machining Chips and Bulk Discs of Amorphous Zr50Cu30Al10Ni10
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2010)
Atomic-scale structural evolution in amorphous Nd9Fe85B6 subjected to severe plastic deformation at room temperature
Wei Li et al.
APPLIED PHYSICS LETTERS (2009)
Increase of Mn solubility with decreasing grain size in ZnO
Boris Straumal et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Fe-C nanograined alloys obtained by high-pressure torsion: Structure and magnetic properties
B. B. Straumal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Atomic scale characterization of deformation-induced interfacial mixing in a Cu/V nanocomposite wire
X. Sauvage et al.
SCRIPTA MATERIALIA (2009)
Complementary use of transmission electron microscopy and atom probe tomography for the investigation of steels nanostructured by severe plastic deformation
X. Sauvage et al.
SCRIPTA MATERIALIA (2009)
Effect of faceting on grain boundary motion in Zn
Vera G. Sursaeva et al.
ACTA MATERIALIA (2008)
Increase of Co solubility with decreasing grain size in ZnO
B. B. Straumal et al.
ACTA MATERIALIA (2008)
Extensive disordering in long-range-ordered Cu3Au induced by severe plastic deformation studied by transmission electron microscopy
C. Rentenberger et al.
ACTA MATERIALIA (2008)
Severe plastic deformation induced nanocrystallization of melt-spun Al85Y8Ni5Co2 amorphous alloy
P. Henits et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Nanocrystallization and magnetic properties of amorphous Nd9Fe85B6 subjected to high-pressure torsion deformation upon annealing
Wei Li et al.
JOURNAL OF APPLIED PHYSICS (2008)
Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process
S. Ohsaki et al.
ACTA MATERIALIA (2007)
Partial amorphization of a Cu-Zr-Ti alloy by high pressure torsion
Adam Revesz et al.
JOURNAL OF APPLIED PHYSICS (2006)
Softening of nanostructured Al-Zn and Al-Mg alloys after severe plastic deformation
A. A. Mazilkin et al.
ACTA MATERIALIA (2006)
Deformation induced primary crystallization in a thermally non-primary crystallizing amorphous Al85Ce8Ni5Co2 alloy
Z Kovács et al.
SCRIPTA MATERIALIA (2006)
Temperature influence on the faceting of Sigma 3 and Sigma 9 grain boundaries in Cu
BB Straumal et al.
ACTA MATERIALIA (2006)
Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion
X Sauvage et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Nanocrystallization of amorphous Al88Y7Fe5 alloy induced by plastic deformation
N Boucharat et al.
SCRIPTA MATERIALIA (2005)
Alloy composition, deformation temperature, pressure and post-deformation annealing effects in severely deformed Ti-Ni based shape memory alloys
SD Prokoshkin et al.
ACTA MATERIALIA (2005)
Faceting of Sigma 3 and Sigma 9 grain boundaries in Cu-Bi alloys
BB Straumal et al.
ACTA MATERIALIA (2005)
Grain boundary phase transitions and their influence on properties of polycrystals
B Straumal et al.
INTERFACE SCIENCE (2004)
Formation of nanograined structure and decomposition of supersaturated solid solution during high pressure torsion of Al-Zn and Al-Mg alloys
BB Straumal et al.
ACTA MATERIALIA (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion
Y Ivanisenko et al.
ACTA MATERIALIA (2003)
Structure and properties of amorphous and nanocrystalline NiTi prepared by severe plastic deformation and annealing
AV Sergueeva et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Annealing behaviour of nanostructured carbon steel produced by severe plastic deformation
Y Ivanisenko et al.
SCRIPTA MATERIALIA (2003)
Faceting of Σ3 and Σ9 grain boundaries in copper
BB Straumal et al.
INTERFACE SCIENCE (2001)
The mechanism of nanocrystalline structure formation in Ni3Al during severe plastic deformation
AV Korznikov et al.
ACTA MATERIALIA (2001)
Solid state amorphization in cold drawn Cu/Nb wires
X Sauvage et al.
ACTA MATERIALIA (2001)
分享论文
