☆ 4.6 Article

Foam Glass Crystalline Granular Material from a Polymineral Raw Mix

CRYSTALS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Ceramics

Powder sintering and gel casting methods in making glass foam using waste glass: A review on parameters, performance, and challenges

Ayesha Siddika et al.

Summary: The use of glass foam as a high-performance alternative to conventional insulation materials is gaining popularity, but its manufacturing process is energy-consuming and non-ecofriendly. Researchers have developed new sintering methods to address this issue, but research findings on glass foam properties are scattered due to varying parameters used by researchers. Material design and sintering conditions play a crucial role in determining the performance of glass foam.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Construction & Building Technology

Study of different granular by-products as internal curing water reservoirs in concrete

Roberto Rodriguez-Alvaro et al.

Summary: The study investigated the use of ceramic recycled aggregate, mixed recycled aggregate, and coal bottom ash as internal curing water reservoirs in concrete, finding that the addition of mixed recycled aggregate and coal bottom ash significantly reduced autogenous shrinkage with minimal effects on drying shrinkage and compressive strength. However, ceramic recycled aggregate had the worst effect on autogenous shrinkage but increased the strength of the specimens.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effect of the addition of nano glass powder on the compressive strength of high volume fly ash modified concrete

Ali M. Onaizi et al.

Summary: Using nanoparticles derived from waste glass bottles as a nano additive in high-volume fly ash (HVFA) concrete can improve early strength and compensate for the strength loss associated with fly ash. The study found that the workability of the concrete decreased when glass nanoparticles were added, but there was a significant improvement in compressive strength, especially when using 5% glass nanoparticles.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Application of foaming agent-oxidizing agent couples to foamed-glass formation

Jakob Konig et al.

Summary: This study investigates the use of foaming agents to foam cathode-ray-tube panel glass and explores the impact of carbon type, MnxOy, and furnace atmosphere on foaming effect and physical properties of foams. The results show that the best foaming effect is achieved with MnO2 in an oxidizing atmosphere, while oxidation of carbon is facilitated by Mn3O4 in an oxygen-free atmosphere, leading to the formation of CO and open porosity. The study demonstrates the potential for improving thermal insulation by decreasing density in closed-porous samples produced with carbon black and Mn3O4.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Experimental study on foam glass prepared by hydrothermal hot pressing-calcination technique using waste glass and fly ash

Huiping Song et al.

Summary: Foam glass, prepared using waste glass powder and fly ash, exhibited superior performance in insulation, sound absorption, and fire protection. The study investigated the effects of various parameters on the properties of foam glass, revealing optimized conditions for density, compressive strength, porosity, and thermal conductivity.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Construction & Building Technology

Lightweight expanded clay aggregate properties based on laboratory testing

Elias Roces et al.

Summary: This paper analyzes some properties of the LECA 10/20 manufactured by Arlita in Portugal, studying its weight density, water absorption, deformability, and shear resistance based on extensive tests. Results obtained from this set of tests are directly applicable to the design of LECA fillings, and a novel model is presented to estimate water absorption of LECA grains over time.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Acoustic Properties of Innovative Concretes: A Review

Roman Fediuk et al.

Summary: Concrete is a common building material with different acoustic properties depending on density, type of aggregates, and pore distribution. The level of sound reflection in modified concrete depends on these factors, while sound absorption can be improved by forming open pores. Research on acoustic insulation and AIC properties provides insights into mitigating noise pollution and enhancing productivity, health, and well-being in buildings.

MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Effects of carbon nanotubes on expanded glass and silica aerogel based lightweight concrete

Suman Kumar Adhikary et al.

Summary: This study investigates the effect of carbon nanotubes on lightweight aggregate concrete, showing a significant improvement in compressive strength with the addition of multi-wall carbon nanotubes. The SEM images confirm the uniform dispersal of carbon nanotubes within the concrete structure.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Production of foamed glass-ceramics using furnace bottom ash and glass

Marcus H. N. Yio et al.

Summary: This research produced foamed glass-ceramics from coal fired power station furnace bottom ash and soda-lime-silica glass, exploring the effects of different additives on the fabrication process and properties, and discussing a range of potential applications for the materials.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Construction & Building Technology

Modelling of the mechanisms of heat transfer in recycled glass foams

Paula Cimavilla-Roman et al.

Summary: Research on glass foams focuses on improving thermal insulation by studying heat transfer mechanisms, with the goal of reducing thermal conductivity to replace traditional insulators.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Applicability of water glass for the transfer of the glass-foaming process from controlled to air atmosphere

Uros Hribar et al.

Summary: This study aims to transfer the foaming process of carbon-containing mixtures from an inert to an air atmosphere by adding water glass, which effectively protects the carbon from premature oxidation. The obtained foamed glass samples show relatively low density and open porosity, resulting in low thermal conductivity.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Civil

Mitigating confined blast response of buried steel box structure with foam concrete

Xiaojuan Wang et al.

Summary: The demand and application of buried structures have greatly increased recently. In this study, the confined blast mitigation effectiveness of buried steel boxes with foam concrete was investigated both experimentally and numerically. The study found that applying foam concrete layer effectively mitigates confined blast, but the thickness and crushing strength of the foam concrete should be carefully considered.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Biosilicate® Glass-Ceramic Foams From Refined Alkali Activation and Gel Casting

Enrico Bernardo et al.

Summary: Biosilicate (R) glass-ceramics are a promising alternative to 45S5 Bioglass, offering similar bioactivity and bioresorbability but with superior mechanical strength. A gel-casting process based on room temperature foaming of powders in a weakly alkaline aqueous solution, followed by sintering at 1000 degrees C, was explored for shaping highly porous bodies for bone tissue engineering applications. Amorphous powders showed more intense gelation and promoted homogeneous foaming, leading to substantial crystallization upon firing. Foamed samples were evaluated for homogeneity using micro-tomography and further improved through foam casting before setting.

FRONTIERS IN MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Low-velocity impact response of novel prepacked expanded clay aggregate fibrous concrete produced with carbon nano tube, glass fiber mesh and steel fiber

G. Murali et al.

Summary: The research investigates the impact response of Prepacked Expanded Clay Aggregate Fibrous Concrete (PEAFC) comprising expanded clay aggregate, multi-walled nano-carbon tubes, steel fiber, and glass fiber mesh. By studying 41 PEAFC mixtures, it was found that increasing the diameter of the glass fiber mesh enhances crack arresting potential and leads to higher impact energy, while steel fiber contributes the most to the improvement in impact resistance. The addition of multi-walled nano-carbon tubes fills nano-pores and nano cracks, resulting in a denser cement grout matrix.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Impact resistance of concrete produced with plain and reinforced cold-bonded fly ash aggregates

Hasan Yildirim et al.

Summary: This study investigated the impact resistance of concrete produced with different types of fly ash aggregates replacing crushed stone coarse aggregates. The addition of polypropylene fibers and crumb rubber into the fly ash pellets enhanced the impact resistance of concrete.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Thermal and energy characteristics of composite structural insulated panels consisting of glass fiber reinforced polymer and cementitious materials

Changhai Peng et al.

Summary: This study developed composited structural insulated panels (CSIPs) with GFRP and GFRC materials to improve thermal properties and energy savings in buildings. Simulation results using ANSYS and EnergyPlus showed that GFRP SIPs outperformed steel SIPs in terms of energy consumption and thermal performance. Reducing stud web area and using less conductive materials can effectively enhance the thermal properties of SIPs.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Ceramics

Influence of additives on the crystallization and thermal conductivity of container glass cullet for foamed glass preparation

Sonja Smiljanic et al.

Summary: The study found that waste container glass undergoes partial crystallization during the sintering process, which can be inhibited by adding fluxing agents. This can lead to a significant decrease in thermal conductivity of the foamed glass.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Construction & Building Technology

Optimization of fresh properties and durability of the green gypsum-cement paste

Valery Lesovik et al.

Summary: Despite the numerous advantages of gypsum materials, their application is limited by low compressive strength, water resistance, and durability. This study focuses on enhancing the efficiency of gypsum composites by incorporating Portland cement and various industrial wastes. The research highlights the effects of industrial waste on the structure and properties of green gypsum-cement paste (GGCP), with findings suggesting that the fineness of grinding of components can significantly impact the compressive strength of the GGCP.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Identification, generation of autoclaved aerated concrete pore structure and simulation of its influence on thermal conductivity

Gonglian Chen et al.

Summary: The pore structure of AAC plays a crucial role in its mechanical properties and thermal conductivity. Finite element analysis was used to establish mathematical models for the thermal conductivity of AAC based on pore size and porosity.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Improving the Hardened Properties of Nonautoclaved Silicate Materials Using Nanodispersed Mine Waste

Valery Lesovik et al.

Summary: The study focuses on improving the hardened properties of nonautoclaved silicate materials using nanodispersed mine waste, leading to the development of low energy consumption silicate wall materials with improved strength and optimized weather resistance.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

添加到收藏夹

Article Crystallography

Combined Effect of Multi-Walled Carbon Nanotubes, Steel Fibre and Glass Fibre Mesh on Novel Two-Stage Expanded Clay Aggregate Concrete against Impact Loading

Gunasekaran Murali et al.

Summary: The study investigated the improvement of strength properties in ECA-based concrete by adding materials like MWCNT, GFM, and SF, proposing the new concrete type of Two-Stage Expanded Clay Aggregate Fibrous Concrete (TECAFC) and outlining its casting method and enhanced impact resistance.

CRYSTALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Foam glass derived from ferrochrome slag and waste container glass: Synthesis and extensive characterizations

Cansu Kurtulus et al.

Summary: This study synthesized foam glass from waste materials for potential use as a heat insulation material. By adjusting factors such as ratio, temperature, rate, and time, 36 different samples with varying properties were obtained. The results showed that samples with lower G-to-WG ratio, higher process temperature, lower heating rate, and longer dwell time exhibited better performance.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Study on Factors Affecting Properties of Foam Glass Made from Waste Glass

Yang Liu et al.

Summary: Foam glass is a new green material that can be made using waste glass, and its properties such as density, thermal conductivity, and compressive strength are influenced by various raw materials and foaming agents. Optimization of these factors can lead to foam glass with different porous structures and improved properties, expanding its potential for a wider range of applications in factories.

JOURNAL OF RENEWABLE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and characterization of foam glass from waste container glasses and water glass for application in thermal insulations

Seun Samuel Owoeye et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Construction & Building Technology

Effects of porous ceramic roof tile waste aggregate on strength development and carbonation resistance of steam-cured fly ash concrete

Yuko Ogawa et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Comparison of the processing conditions and the properties of granules made from fly ash of lignite and coal

Gabriel Borowski et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Article Materials Science, Ceramics

Properties of foamed glass upon addition of polysiloxane

Eunseok Kim et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2020)

添加到收藏夹

Article Construction & Building Technology

A Taguchi approach for study on impact response of ultra-high-performance polypropylene fibrous cementitious composite

G. Murali et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Na2CO3 content on thermal properties of foam-glass ceramics prepared from smelting slag

Yong-Hong Niu et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Construction & Building Technology

Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates

Xiangguo Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Improvement of Performances of the Gypsum-Cement Fiber Reinforced Composite (GCFRC)

Natalia Chernysheva et al.

MATERIALS (2020)

添加到收藏夹

Review Crystallography

Design Efficiency, Characteristics, and Utilization of Reinforced Foamed Concrete: A Review

Mugahed Amran et al.

CRYSTALS (2020)

添加到收藏夹

Article Construction & Building Technology

Improving the behaviors of foam concrete through the use of composite binder

Valery Lesovik et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Ceramics

Formation of pale foam glass from colored glass cullet

Tomoko Akai et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2020)

添加到收藏夹

Article Engineering, Civil

Influence of structural parameters on the properties of fibred-foamed concrete

Y. H. Mugahed Amran

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Performance properties of structural fibred-foamed concrete

Y. H. Mugahed Amran et al.

RESULTS IN ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Ceramics

Foam glass using sodium hydroxide as foaming agent: Study on the reaction mechanism in soda-lime glass matrix

Robson Couto da Silva et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

添加到收藏夹

Review Construction & Building Technology

Preparation and application of alkali-activated materials based on waste glass and coal gangue: A review

Mohamad Jamali Moghadam et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Effect of nanoparticles on foaming agent and the foamed concrete

Li Hou et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass

N. M. Azreen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Porous glass-ceramics from alkali activation and sinter-crystallization of mixtures of waste glass and residues from plasma processing of municipal solid waste

Patricia Rabelo Monich et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates

Chalermphan Narattha et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Construction & Building Technology

A novel building material with low thermal conductivity: Rapid synthesis of foam concrete reinforced silica aerogel and energy performance simulation

Sijia Liu et al.

ENERGY AND BUILDINGS (2018)

添加到收藏夹

Proceedings Paper Automation & Control Systems

New point of view on materials development

M. Y. Elistratkin et al.

INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2017 (2018)

添加到收藏夹

Article Materials Science, Ceramics

Influence of foaming agents on solid thermal conductivity of foam glasses prepared from CRT panel glass

Martin B. Ostergaard et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Possibilities of lightweight high strength concrete production from sintered fly ash aggregate

Vit Cerny et al.

18TH INTERNATIONAL CONFERENCE ON REHABILITATION AND RECONSTRUCTION OF BUILDINGS (CRRB) (2017)

添加到收藏夹

Article Materials Science, Ceramics

Recycling of harmful waste lead-zinc mine tailings and fly ash for preparation of inorganic porous ceramics

Taoyong Liu et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Ceramics

Influence of the glass particle size on the foaming process and physical characteristics of foam glasses

Jakob Konig et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of ultralight glass foams via vacuum-assisted foaming

Ya-Nan Qu et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Water and waterglass mixtures for foam glass production

Daniela Hesky et al.

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Construction & Building Technology

Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete

P. Gomathi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Novel glass ceramic foams materials based on red mud

Yuxi Guo et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Review Construction & Building Technology

Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement

Alaa M. Rashad

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Strengthening of Foam Glass Materials

Olga Kazmina et al.

NANOMATERIALS FOR STRUCTURAL, FUNCTIONAL AND BIOMEDICAL APPLICATIONS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Glass foam of macroporosity using glass waste and sodium hydroxide as the foaming agent

Andre C. Bento et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Article Environmental Sciences

Phosphate sludge: Thermal transformation and use as lightweight aggregate material

M. Loutou et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)

添加到收藏夹

Article Construction & Building Technology

A method to determine water retainability of porous fine aggregate for design and quality control of fresh concrete

R. Kasemchaisiri et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.