Post-Annealing Effects on the Structure and Semiconductor Performance of Nanocrystalline ZnTe Thin Films Electrodeposited from an Aqueous Solution Containing Citric Acid

Using the potentiostatic electrodeposition technique, zinc telluride nanocrystalline thin films and an array of nanowires were synthesized in a citric acid bath. Electrodeposited zinc telluride thin films with stoichiometric compositions were obtained at a cathode potential of approximately -0.8 V versus Ag/AgCl, which was in a more noble region compared with the equilibrium potential of zinc. The average thickness of the zinc telluride thin films was approximately 3 mu m, and the average growth rate was approximately 3 nm s(-1). The as-deposited zinc telluride thin films had an amorphous phase with a black tint. By contrast, the zinc telluride thin films annealed at 683 K had a crystalline phase with a reddish-brown tint. The electrodeposited single-phase zinc telluride exhibited an optical absorption performance in a wavelength region that was shorter than 559 nm. At the annealing temperature of 683 K, the zinc telluride films exhibited an energy band gap of 2.3 eV, which was almost identical to that of single-crystal zinc telluride. The resistivity of the as-deposited amorphous-like zinc telluride thin films was approximately 2 x 10(5) omega & BULL;m, whereas that of the samples annealed at 683 K was around 2 x 10(3) omega & BULL;m, which was smaller than that of single-crystal zinc telluride. A three-dimensional nanostructure constructed with the zinc telluride nanowire array was also demonstrated using a template synthesis technique.

Automated summary

Using the potentiostatic electrodeposition technique, zinc telluride nanocrystalline thin films and an array of nanowires were successfully synthesized in a citric acid bath. After annealing, the zinc telluride films exhibited a crystalline phase with a reddish-brown tint and demonstrated optical absorption performance in a wavelength region shorter than 559 nm.