4.8 Article

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain-Refining and Dislocation Regulation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Densification mechanism and microstructure characteristics of nano- and micro-crystalline alumina by high-pressure and low temperature sintering

Haiyue Xu et al.

Summary: High-pressure sintering can effectively produce dense ceramics at relatively low temperatures. Research shows that sintering densification temperature and starting threshold temperature of grain growth increase with grain size and applied pressure. Ceramics sintered under high pressure and low temperature exhibit higher grain boundary energy, residual stress, and dislocation density compared to samples sintered without additional pressure.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Physical properties of high-temperature sintered TaB2 under high pressure

Zhengang Zhang et al.

Summary: Tantalum diboride (TaB2) is an important transition metal diboride with significant scientific and industrial interest. By fabricating TaB2 ceramic samples using high-pressure sintering and high-energy ball milling (HEBM), the microstructure and mechanical properties were investigated under high pressure at different sintering temperatures, with comparisons made to bulk TaB2 ceramic. The Vickers hardness, fracture toughness, Young's modulus, and relative density of TaB2 ceramic at 1200 degrees C, under 5.5 GPa, were evaluated to be 26 GPa, 3.8 MPa m(1/2), 402 GPa, and 95.11%, respectively. Additionally, it was observed that the Vickers hardness, thermal stability, and fracture toughness are critically controlled by the grain size and microstructures of the samples, providing insights into the physical properties of TaB2 under high pressure and temperatures, as well as avenues for the synthesis and design of novel functional ceramics.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Structural integrity and damage of ZrB2 ceramics after 4 MeV Au ions irradiation

Weichao Bao et al.

Summary: Under irradiation by 4 MeV Au2+ ions, zirconium diboride ceramic exhibits substantial resilience to damage while maintaining structural integrity. The lattice shrinkage and formation of dislocations suggest potential for ZrB2 as a structural material in nuclear systems.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Ceramics

Direct ink writing of hierarchical porous ultra-high temperature ceramics (ZrB2)

Mitchell L. Sesso et al.

Summary: A method for producing hierarchical multi-scale porous ultra-high temperature ceramics (zirconium diboride, ZrB2) using 3D printing has been developed. The ceramics exhibit high strength to density ratio, making them potentially suitable for insulation near very high-temperature surfaces in aerospace applications.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Sintering highly dense ultra-high temperature ceramics with suppressed grain growth

Junfeng Gu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Effects of Ti, Y, and Hf additions on the thermal properties of ZrB2

Austin D. Stanfield et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Review Materials Science, Multidisciplinary

Review on ultra-high temperature boride ceramics

Brahma Raju Golla et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Spark plasma sintering of ZrB2 powders synthesized by citrate gel method

Hasan Gocmez et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Article Materials Science, Ceramics

Oxidation behavior of ZrB2-SiC-ZrC in oxygen-hydrogen torch environment

Yuki Kubota et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Article Chemistry, Multidisciplinary

Ultrastrong Boron Frameworks in ZrB12: A Highway for Electron Conducting

Teng Ma et al.

ADVANCED MATERIALS (2017)

Article Materials Science, Ceramics

Particle refinement of ZrB2 by the combination of borothermal reduction and solid solution

Wei-Ming Guo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Nanoscience & Nanotechnology

Ultra-high temperature ceramics: Materials for extreme environments

William G. Fahrenholtz et al.

SCRIPTA MATERIALIA (2017)

Article Materials Science, Ceramics

Grain size dependence of hardness and fracture toughness in pure near fully-dense boron carbide ceramics

Bibi Malmal Moshtaghioun et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Article Materials Science, Multidisciplinary

Mechanisms of pore formation in high-temperature carbides: Case study of TaC prepared by spark plasma sintering

James P. Kelly et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Densification, mechanical and tribological properties of ZrB2 by SPS: Effect of pulsed current

S. Chakraborty et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)

Article Materials Science, Ceramics

Pressureless sintering, mechanical properties and oxidation behavior of ZrB2 ceramics doped with B4C

Hai-Bin Ma et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of hot pressed ZrB2 system with TiB2

S. Chakraborty et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)

Article Materials Science, Ceramics

Anisotropic Grain Boundary Mobility in Undoped and Doped Alumina

Ran Akiva et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Multidisciplinary Sciences

Nanotwinned diamond with unprecedented hardness and stability

Quan Huang et al.

NATURE (2014)

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Article Multidisciplinary Sciences

Ultrahard nanotwinned cubic boron nitride

Yongjun Tian et al.

NATURE (2013)

Article Nanoscience & Nanotechnology

Spark-plasma sintering efficiency control by inter-particle contact area growth: A viewpoint

E. Olevsky et al.

SCRIPTA MATERIALIA (2013)

Article Multidisciplinary Sciences

Atomic structure of amorphous shear bands in boron carbide

K. Madhav Reddy et al.

NATURE COMMUNICATIONS (2013)

Article Materials Science, Ceramics

Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB2 ultra-high-temperature ceramics

V. Zamora et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Nanoscience & Nanotechnology

Residual strength of hot pressed zirconium diboride (ZrB2) after exposure to high temperatures

Manish Patel et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Materials Science, Ceramics

Effect of Starting Particle Size and Oxygen Content on Densification of ZrB2

Matthew Thompson et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

Article Materials Science, Ceramics

In situ studies of oxidation of ZrB2 and ZrB2-SiC composites at high temperatures

P. Sarin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

Article Multidisciplinary Sciences

How Grain Growth Stops: A Mechanism for Grain-Growth Stagnation in Pure Materials

Elizabeth A. Holm et al.

SCIENCE (2010)

Review Materials Science, Ceramics

Densification of ZrB2-based composites and their mechanical and physical properties: A review

Shu-Qi Guo

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

Article Materials Science, Ceramics

Improved Oxidation Resistance of Zirconium Diboride by Tungsten Carbide Additions

Shi C. Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Article Materials Science, Ceramics

Spark plasma sintering of zirconium diborides

Shu-Qi Guo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Article Nanoscience & Nanotechnology

Pressureless sintering and physical properties of ZrB2-based composites with ZrSi2 additive

Shu-Qi Guo et al.

SCRIPTA MATERIALIA (2008)

Review Materials Science, Ceramics

Refractory diborides of zirconium and hafnium

William G. Fahrenholtz et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)

Article Materials Science, Ceramics

Pressureless sintering of zirconium diboride

AL Chamberlain et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Nanoscience & Nanotechnology

Hall-Petch relation and boundary strengthening

N Hansen

SCRIPTA MATERIALIA (2004)

Article Materials Science, Multidisciplinary

A model of continuous dynamic recrystallization

S Gourdet et al.

ACTA MATERIALIA (2003)

Article Materials Science, Ceramics

Oxidation behavior of titanium boride at elevated temperatures

YH Koh et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)