Nanoscale-Resistive Switching in Forming-Free Zinc Oxide Memristive Structures

This article presents the results of experimental studies of the impact of electrode material and the effect of nanoscale film thickness on the resistive switching in forming-free nanocrystalline ZnO films grown by pulsed laser deposition. It was demonstrated that the nanocrystalline ZnO film with TiN, Pt, ZnO:In, and ZnO:Pd bottom electrodes exhibits a nonlinear bipolar effect of forming-free resistive switching. The sample with Pt showed the highest resistance values R-HRS and R-LRS and the highest value of U-set = 2.7 +/- 0.4 V. The samples with the ZnO:In and ZnO:Pd bottom electrode showed the lowest U-set and U-res values. An increase in the number of laser pulses from 1000 to 5000 was shown to lead to an increase in the thickness of the nanocrystalline ZnO film from 7.2 +/- 2.5 nm to 53.6 +/- 18.3 nm. The dependence of electrophysical parameters (electron concentration, electron mobility, and resistivity) on the thickness of the forming-free nanocrystalline ZnO film for the TiN/ZnO/W structure was investigated. The endurance test and homogeneity test for TiN/ZnO/W structures were performed. The structure Al2O3/TiN/ZnO/W with a nanocrystalline ZnO thickness 41.2 +/- 9.7 nm was shown to be preferable for the manufacture of ReRAM and memristive neuromorphic systems due to the highest value of R-HRS/R-LRS = 2307.8 +/- 166.4 and low values of U-set = 1.9 +/- 0.2 V and U-res = -1.3 +/- 0.5 V. It was demonstrated that the use of the TiN top electrode in the Al2O3/TiN/ZnO memristor structure allowed for the reduction in U-set and Ures and the increase in the R-HRS/R-LRS ratio. The results obtained can be used in the manufacturing of resistive-switching nanoscale devices for neuromorphic computing based on the forming-free nanocrystalline ZnO oxide films.

Automated summary

This article presents the experimental results on the resistive switching of nanocrystalline ZnO films grown by pulsed laser deposition, focusing on the impact of electrode material and nanoscale film thickness. The study shows that different bottom electrode materials exhibit nonlinear bipolar resistive switching effects in nanocrystalline ZnO films. Moreover, increasing the number of laser pulses leads to an increase in film thickness and affects electron concentration, electron mobility, and resistivity.