相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Sliding-friction wear of a seashell particulate reinforced polymer matrix composite: modeling and optimization through RSM and Grey Wolf optimizer
P. Vasanthkumar et al.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING (2022)
Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM)
K. Ragupathy et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)
An investigation on microstructure and mechanical behaviour of copper-nickel coated carbon fibre reinforced aluminium composites
K. Gajalakshmi et al.
MATERIALS RESEARCH EXPRESS (2020)
Drilling studies on carbon fiber-reinforced nano-SiC particles composites using response surface methodology
A. Arun Premnath
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
Multi-response optimization of dry sliding wear parameters of AA6026 using hybrid gray relational analysis coupled with response surface method
K. Gajalakshmi et al.
MEASUREMENT & CONTROL (2019)
A review on the production of metal matrix composites through stir casting - Furnace design, properties, challenges, and research opportunities
Ramanathan Arunachalam et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Experimental investigation on drilling of natural flax fiber-reinforced composites
H. Rezghi Maleki et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Circular cutting strategy for drilling of carbon fiber-reinforced plastics (CFRPs)
Massimo Durante et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
CRYOGENIC DRILLING OF CARBON FIBER-REINFORCED COMPOSITE (CFRP)
Ugur Koklu et al.
SURFACE REVIEW AND LETTERS (2019)
Synergistic additive-mediated CVD growth and chemical modification of 2D materials
Jizhou Jiang et al.
CHEMICAL SOCIETY REVIEWS (2019)
Process Parameters Optimization to Reduce the Thrust Force in CFRP Composites Drilling Using RSM and Taguchi Method
B. R. N. Murthy
ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS (2019)
Investigations on the axial cutting force during drilling of carbon fiber composite material
Mingyang Wu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
An ultra-sensitive electrochemical sensor based on 2D g-C3N4/CuO nanocomposites for dopamine detection
Jing Zou et al.
CARBON (2018)
Investigation of drilling parameters on hybrid polymer composites using grey relational analysis, regression, fuzzy logic, and ANN models
G. Anand et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Investigation of Drilling Parameters Using Grey Relational Analysis and Response Surface Methodology of Biaxial Glass Fibre Reinforced with Modified Epoxy Resin Composite
I. Infanta Mary Priya et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2018)
Evaluation of Mechanical Properties of MWCNT/Nanoclay Reinforced Aluminium alloy Metal Matrix Composite
P. S. Samuel Ratna Kumar et al.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES (2018)
Prediction of Thrust Force and Cutting Torque in Drilling Based on the Response Surface Methodology
Panagiotis Kyratsis et al.
MACHINES (2018)
Nanoclay-based self-healing, corrosion protection coatings on aluminum, A356.0 and AZ91 substrates
S. Manasa et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2017)
Some experimental investigations on drilling AA (6351)-SiC-B4C composite
S. Thirumalai Kumaran et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Evaporation Rate-Based Water Cycle Algorithm for Short-Term Hydrothermal Scheduling
Shaikh Saaqib Haroon et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)
Effect of drilling parameters and tool geometry on drilling performance in drilling carbon fiber-reinforced plastic/titanium alloy stacks
Yingying Wei et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
Preparation and Research of Electroless Copper on Carbon Fibers
Zhongcai Shao et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Evaluation of the Effect of Clay Nanoparticles on Mechanical Properties of Recycled Polyethylene
Ehsan Avazverdi et al.
PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2016)
Machinability evaluation of Al-4%Cu-7.5%SiC metal matrix composite by Taguchi-Grey relational analysis and NSGA-II
V. Selvakumar et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2016)
Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment
Munish Kumar Gupta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Water cycle algorithm for solving constrained multi-objective optimization problems
Ali Sadollah et al.
APPLIED SOFT COMPUTING (2015)
Flank wear and surface roughness prediction in hard turning via artificial neural network and multiple regressions
N. Senthilkumar et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2015)
Application of Response Surface Methodology and Firefly Algorithm for Optimizing Multiple Responses in Turning AISI 1045 Steel
N. Senthilkumar et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)
Dependence of electronic structure of g-C3N4 on the layer number of its nanosheets: A study by Raman spectroscopy coupled with first-principles calculations
Jizhou Jiang et al.
CARBON (2014)
EFFECTS OF ROTATIONAL SPEED, FEED RATE AND TOOL TYPE ON TEMPERATURES AND CUTTING FORCES WHEN DRILLING BOVINE CORTICAL BONE
Josu Moreno Soriano et al.
MACHINING SCIENCE AND TECHNOLOGY (2013)
Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites
Thiagarajan Rajmohan et al.
MEASUREMENT (2013)
Modeling and multi-constrained optimization in drilling process of carbon fiber reinforced epoxy composite
Hamzeh Shahrajabian et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Water cycle algorithm - A novel metaheuristic optimization method for solving constrained engineering optimization problems
Hadi Eskandar et al.
COMPUTERS & STRUCTURES (2012)
Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills
T. Rajmohan et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Modelling of the thrust force of the drilling operation on PA6-nanoclay nanocomposites using particle swarm optimization
M. R. Soleymani Yazdi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Delamination Analysis in Drilling of CFRP Composites Using Response Surface Methodology
A. Krishnamoorthy et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Multiple Performance Optimization in Machining of GFRP Composites by a PCD Tool using Non-dominated Sorting Genetic Algorithm (NSGA-II)
K. Palanikumar et al.
METALS AND MATERIALS INTERNATIONAL (2009)
Influence of process parameters on electric discharge machining of WC/30%Co composites
D. Kanagarajan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Optimization of machining parameters in turning GFRP composites using a carbide (K10) tool based on the Taguchi method with fuzzy logics
K. Palanikumar et al.
METALS AND MATERIALS INTERNATIONAL (2006)
Electroless alloy/composite coatings: A review
RC Agarwala et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
Drilling of aramid and carbon fiber polymer composites
MS Won et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
分享论文
