☆ 4.5 Article

A Facile Surface Passivation Method to Stabilized Lithium Metal Anodes Facilitate the Practical Application of Quasi-Solid-State Batteries

ADVANCED MATERIALS INTERFACES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Regulating Li deposition by constructing homogeneous LiF protective layer for high-performance Li metal anode

Songsong Liu et al.

Summary: In this study, a homogeneous lithium fluoride (LiF) protective layer was constructed on the Li anode using a vacuum evaporation method, leading to improved stability and inhibiting dendrite growth. The LiF-protected Li anode showed 2.5 times longer lifespan and slower capacity attenuation in full cell configurations compared to control cells, indicating the significant role of a homogeneous protective layer in stabilizing Li anodes for rechargeable lithium metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Areal Capacity Dendrite-Free Li Anode Enabled by Metal-Organic Framework-Derived Nanorod Array Modified Carbon Cloth for Solid State Li Metal Batteries

Tian-Shi Wang et al.

Summary: A carbonized metal-organic framework (MOF) nanorod arrays modified carbon cloth (NRA-CC) has been developed for uniform Li plating/stripping in solid-state Li metal batteries. This electrode effectively suppresses Li dendrite growth and improves cycling stability and Coulombic efficiency.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Hybrid solid electrolyte enabled dendrite-free Li anodes for high-performance quasi-solid-state lithium-oxygen batteries

Jin Wang et al.

Summary: A new HSE with a LAGP core and PVDF-HFP shell has been developed to address dendrite growth in Li-O-2 batteries, providing high modulus and uniform Li+ distribution for improved performance and long cycling stability.

NATIONAL SCIENCE REVIEW (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Pressure Self-Adaptable Route for Uniform Lithium Plating and Stripping in Composite Anode

Peng Shi et al.

Summary: A new strategy for designing composite anodes to regulate the inner Li plating/stripping using self-adaptable pressure was proposed in this study. This approach resulted in higher cycling stability and longer battery life for lithium metal batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Incorporation of LiF into functionalized polymer fiber networks enabling high capacity and high rate cycling of lithium metal composite anodes

Shuang Zhou et al.

Summary: Constructing a lithium metal host with functionalization can effectively guide a controlled deposition of Li and improve the stability of lithium metal batteries. The 3D oxidized polyacrylonitrile fiber network incorporated with LiF shows excellent wettability and Li+ access, leading to high area-specific capacity and stable cycling performance. The developed composite scaffolds have potential to be integrated with advanced electrolytes and cathodes for high performance lithium metal batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Structural Evolution upon Delithiation/Lithiation in Prelithiated Foil Anodes: A Case Study of AgLi Alloys with High Li Utilization and Marginal Volume Variation

Xuan Wu et al.

Summary: This study investigates the structural evolution and stability of nanoporous materials in lithium-ion batteries using Li-Ag composites as a case study. The results show that the rationally designed nanoporous AgLi framework can achieve dendrite-free anodes with stable electrochemical performance.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Highly-lithiophilic Ag@PDA-GO film to Suppress Dendrite Formation on Cu Substrate in Anode-free Lithium Metal Batteries

Zewdu Tadesse Wondimkun et al.

Summary: By coating lithiophilic Ag@PDA and artificial SEI graphene oxide (GO) on the Cu current collector, a more uniform lithium deposition, lower nucleation overpotential, and higher Coulombic efficiency can be achieved. The modified electrodes show enhanced performance in inhibiting lithium dendrite growth and electrolyte decomposition in anode free lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

A Protective Layer for Lithium Metal Anode: Why and How

Zhiyuan Han et al.

Summary: This review summarizes the recent progress on constructing protective layers on lithium metal anode materials and discusses the design principles, highlighting advanced protective layers with different properties and their importance in addressing safety concerns in lithium metal batteries.

SMALL METHODS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

10 μm-Thick High-Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All-Solid-State Lithium-Metal Batteries

Zhiyan Wang et al.

Summary: This study presents an ultrathin solid polymer electrolyte with high ionic conductance and excellent mechanical properties, showing promising stability in various battery systems, particularly in all-solid-state lithium-metal batteries.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ formed three-dimensional (3D) lithium-boron (Li-B) alloy as a potential anode for next-generation lithium batteries

Hai-Feng Huang et al.

Summary: This study demonstrated the use of in situ formed three-dimensional lithium-boron alloy as an excellent alternative to lithium metal, with the potential to improve battery performance by adjusting the boron content. The Li-B alloy with the lowest boron content showed the lowest interface resistance, while the 15LiB alloy exhibited the best cycling performance.

RARE METALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Facile Formation of a LiF-Carbon Layer as an Artificial Cathodic Electrolyte Interphase through Encapsulation of a Cathode with Carbon Monofluoride

Jong-Heon Lim et al.

Summary: The study successfully improved the cycling stability of lithium batteries by forming an artificial protective layer on high voltage lithium cobalt oxide, enhancing the performance of the batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Energy Density Solid State Lithium Metal Batteries Enabled by Sub-5 μm Solid Polymer Electrolytes

Fei He et al.

Summary: Solid-state batteries (SSBs) are favored for their ability to address safety concerns and ensure high energy density. This study introduces an ultrathin bilayer solid-state electrolyte to enhance the safety and performance of SSBs, achieving high energy density goals.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Chemical Lithiation Transforms Diamond-Like Carbon into an Ultrastrong Ion Conductor for Dendrite-Free Lithium-Metal Anodes

Zhongzhong Li et al.

Summary: This study presents a method of coating a PP separator with a layer of ultrastrong DLC to suppress Li-dendrite growth, which undergoes in situ chemical lithiation when assembled with the lithium-metal anode, resulting in stable cycling and dendrite-free lithium deposition.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Fluoride in Electrolyte for Stable and Safe Lithium-Metal Batteries

Yi-Hong Tan et al.

Summary: Electrolyte engineering with fluorinated additives has the potential to enhance cycling stability and safety of high-energy Li-metal batteries. The electrolyte developed in this study utilizing a porous lithium fluoride strategy demonstrated nonflammability and high electrochemical performance, leading to stable cycling of Li-metal anodes even at high current densities. This new electrolyte engineering strategy offers promise for stable and safe Li-metal batteries.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optimizing Electrode/Electrolyte Interphases and Li-Ion Flux/Solvation for Lithium-Metal Batteries with Qua-Functional Heptafluorobutyric Anhydride

Junda Huang et al.

Summary: The study introduced a quaternary-functional additive HFA that can optimize the solid electrolyte interphase in rechargeable lithium-metal batteries. Using HFA can achieve stable lithium plating, suppress metal ion dissolution, and enhance the wettability of the separator by the electrolyte, thereby increasing lithium ion flux.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulation of SEI Formation by Anion Receptors to Achieve Ultra-Stable Lithium-Metal Batteries

Kangsheng Huang et al.

Summary: In this study, an anion-receptor-mediated carbonate electrolyte was reported to improve the cyclability of Li-metal anodes in rechargeable batteries with high average Coulombic efficiency and enhanced ion dynamics. XPS analysis distinguished differences in SEI components between the developed and blank electrolyte, showcasing molecular insights into the Li-metal/electrolyte interface. A 2.5 Ah prototype pouch cell was prepared with a high energy density and 90.90% capacity retention over 50 cycles.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Anion-Derived Solid Electrolyte Interphase in Lithium Metal Batteries

Tao Li et al.

Summary: By regulating the electrolyte structure of anions using TPFPB anion acceptors, a stable anion-derived SEI was constructed to improve the stability and cycling performance of lithium metal batteries under practical conditions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes

Darren H. S. Tan et al.

Summary: The research successfully achieved stable operation of silicon anodes by using the interface passivating properties of sulfide solid electrolytes. Analysis showed that this approach eliminates continuous interfacial growth and irreversible lithium losses. The promising performance of microsilicon full cells can be attributed to the ideal interface properties between microsilicon and sulfide electrolytes and the unique chemomechanical behavior of the lithium-silicon alloy.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

A Robust Solid-Solid Interface Using Sodium-Tin Alloy Modified Metallic Sodium Anode Paving Way for All-Solid-State Battery

Jin An Sam Oh et al.

Summary: All-solid-state alkaline metal batteries are considered ideal high energy density storage systems, but require stable physical contact between the anode and solid-state electrolyte. By using a composite anode and enhancing Na+ diffusion kinetics, the tendency to form pores during desodiation can be reduced, leading to stable cycling.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Porous Lithiophilic Li-Si Alloy-Type Interfacial Framework via Self-Discharge Mechanism for Stable Lithium Metal Anode with Superior Rate

Jung Been Park et al.

Summary: Utilizing a 3D porous Li-Si alloy-type interfacial framework has been proposed to enhance the performance of Li anode in lithium metal batteries, showing stable cycling and improved cycling stability by suppressing dendrite growth and volume expansion.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

LiF-Induced Stable Solid Electrolyte Interphase for a Wide Temperature SnO2-Based Anode Extensible to-50 °C

Liang Tan et al.

Summary: By modifying the SnO2 anode with LiF and matching it with suitable electrolytes, the lithium-ion batteries (LIBs) demonstrate enhanced performance at wide temperature ranges. This composite anode maintains stable capacity output even at low temperatures, showing great potential for promoting the use of LIBs in cold environments.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sowing Silver Seeds within Patterned Ditches for Dendrite-Free Lithium Metal Batteries

Hua Wang et al.

Summary: The Li anode with silver nanowires sowed in patterned ditches shows improved stability and cycling performance, with excellent cyclability achieved under specific current and capacity conditions. Pairing this anode with specific cathodes also demonstrates long cycle life and minimal gas generation in full cells over extended cycling, showcasing the effectiveness of the authors' strategy for LMBs.

ADVANCED SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries

Qingyu Wang et al.

Summary: Lithium metal, with its low redox potential and high theoretical capacity, is considered a promising anode material despite safety issues. As energy demands grow, research and improvement of lithium metal anodes have become increasingly important in the field of high-energy batteries.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Carbon-Based Hybrid Interlayer to Anchor the Shuttling of Polysulfides for High-Performance Lithium-Sulfur Batteries

Poonam Rani et al.

Summary: By coating micro-glass fiber with glucose-derived carbon to form an interlayer and using carbon to improve battery performance, researchers have successfully enhanced the electrochemical performance of lithium-sulfur batteries.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Intermetallic interphases in lithium metal and lithium ion batteries

Ke Sun et al.

Summary: A robust electrode-electrolyte interface is crucial for battery systems, especially in the development of new battery technologies. The introduction of artificial Li-alloying intermetallic interphases has significantly improved the stability and performance of lithium metal batteries and solid-state batteries.

INFOMAT (2021)

添加到收藏夹

Article Chemistry, Physical

Formation mechanism of the solid electrolyte interphase in different ester electrolytes

Shi-Jie Yang et al.

Summary: The formation mechanisms of SEI in electrolytes with DEC and EC were studied, revealing that LEC can disperse in the electrolyte while LEDC cannot. First-principles calculations confirmed that the low polymerization degree of LEC leads to its good dispersity, while poly-LEDC can remain on the Li surface as the stable SEI.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode

Anjun Hu et al.

Summary: An artificial hybrid SEI layer composed of lithium-antimony alloy and lithium fluoride was constructed to reduce electron tunneling between the Li anode and SEI, resulting in uniform Li deposition and stable Li plating/stripping behaviors at an ultrahigh rate. This work uncovers the internal mechanism of Li+ transport within the SEI component, providing a pathway to stabilize the Li anode under practical high-rate conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Interface issues of lithium metal anode for high-energy batteries: Challenges, strategies, and perspectives

Yiyao Han et al.

Summary: Lithium metal is considered one of the most promising materials for future high-energy-density storage systems, but its practical application is hindered by interfacial and air instabilities. Recent efforts have overcome many bottlenecks and accelerated the application of high-energy-density lithium metal batteries.

INFOMAT (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Organophosphate-Derived Dual-Layered Interface Enabling Air-Stable and Dendrite-Free Lithium Metal Anode

Xuejun Liu et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing lithium metal anode by octaphenyl polyoxyethylene-lithium complexation

Hongliu Dai et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

The Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength?

Xin Shen et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

A 3D Lithium/Carbon Fiber Anode with Sustained Electrolyte Contact for Solid-State Batteries

Ying Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the Anode-Electrolyte Interface Chemistry for Garnet-Based Solid-State Li Metal Batteries

Tao Deng et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Colossal Granular Lithium Deposits Enabled by the Grain-Coarsening Effect for High-Efficiency Lithium Metal Full Batteries

Weidong Zhang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Dual-Additive Electrolyte Enables Practical Lithium-Metal Batteries

Siyuan Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Physical

Unraveling the Dual Functionality of High-Donor-Number Anion in Lean-Electrolyte Lithium-Sulfur Batteries

Hyunwon Chu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries

Zhiao Yu et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

In-situ organic SEI layer for dendrite-free lithium metal anode

Danmiao Kang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Suppressed dendrite formation realized by selective Li deposition in all-solid-state lithium batteries

Xiaofei Yang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

PVDF-HFP/LiF Composite Interfacial Film to Enhance the Stability of Li-Metal Anodes

Suogang Guo et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage

Hongchang Jin et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Ultrathin Solid Composite Electrolyte Based on Li6.4La3Zr1.4Ta0.6O12/PVDF-HFP/LiTFSI/Succinonitrile for High-Performance Solid-State Lithium Metal Batteries

Tao Wei et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode

Yujing Bi et al.

SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium Metal Anodes with Nonaqueous Electrolytes

Ji-Guang Zhang et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

A novel polyurethane-LiF artificial interface protective membrane as a promising solution towards high-performance lithium metal batteries

Yan Liu et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Facile ex situ formation of a LiF-polymer composite layer as an artificial SEI layer on Li metal by simple roll-press processing for carbonate electrolyte-based Li metal batteries

Seho Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Towards practical lithium-metal anodes

Xin Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Anin situformed LiF protective layer on a Li metal anode with solvent-less cross-linking

Hyunjin Kim et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Article Chemistry, Physical

Boosting the electrochemical performance of 3D composite lithium metal anodes through synergistic structure and interface engineering

Yuanmao Chen et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Polymer-inorganic solid-electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Yue Gao et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Energy & Fuels

Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries

Qing Zhao et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulating the Inner Helmholtz Plane for Stable Solid Electrolyte Interphase on Lithium Metal Anodes

Chong Yan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Aqueous Li-ion battery enabled by halogen conversion-intercalation chemistry in graphite

Chongyin Yang et al.

NATURE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions

Chaojiang Niu et al.

NATURE NANOTECHNOLOGY (2019)

添加到收藏夹

Article Energy & Fuels

Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte

Rochelle Weber et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecular Design of Stable Sulfamide- and Sulfonamide-Based Electrolytes for Aprotic Li-O2 Batteries

Shuting Feng et al.

CHEM (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrochemical Diagram of an Ultrathin Lithium Metal Anode in Pouch Cells

Peng Shi et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Operando Fourier Transform Infrared Investigation of Cathode Electrolyte lnterphase Dynamic Reversible Evolution on Li1.2Ni0.2Mn0.6O2

Yiming Meng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Plating/Stripping Behavior of Actual Lithium Metal Anode

He Liu et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

In situ quantification of interphasial chemistry in Li-ion battery

Tongchao Liu et al.

NATURE NANOTECHNOLOGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries

Shuixin Xia et al.

CHEM (2019)

添加到收藏夹

Article Chemistry, Physical

Dendrite-free lithium metal anode enabled by separator engineering via uniform loading of lithiophilic nucleation sites

Yangyang Liu et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Electrolyte for lithium protection: From liquid to solid

Xiaohong Wu et al.

GREEN ENERGY & ENVIRONMENT (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery

Tiantian Dong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Engineering stable interfaces for three-dimensional lithium metal anodes

Jin Xie et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

JOULE (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Advanced Micro/Nanostructures for Lithium Metal Anodes

Rui Zhang et al.

ADVANCED SCIENCE (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Reviving Lithium-Metal Anodes for Next-Generation High-Energy Batteries

Yanpeng Guo et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Artificial Solid Electrolyte Interphase Layer for Stable Lithium Metal Anodes

Nian-Wu Li et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.