相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。n-doped inorganic molecular clusters as a new type of hole transport material for efficient organic solar cells
Qian Kang et al.
JOULE (2021)
Polyolefin Elastomer as the Anode Interfacial Layer for Improved Mechanical and Air Stabilities in Nonfullerene Solar Cells
Yansong Ge et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Impact of SnF2 Addition on the Chemical and Electronic Surface Structure of CsSnBr3
Claudia Hartmann et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Barrierless Free Charge Generation in the High-Performance PM6:Y6 Bulk Heterojunction Non-Fullerene Solar Cell
Lorena Perdigon-Toro et al.
ADVANCED MATERIALS (2020)
The Doping Mechanism of Halide Perovskite Unveiled by Alkaline Earth Metals
Nga Phung et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
Decent efficiency improvement of organic photovoltaic cell with low acidic hole transport material by controlling doping concentration
Swarup Biswas et al.
APPLIED SURFACE SCIENCE (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Low-Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications
Ke Gao et al.
ADVANCED MATERIALS (2020)
Enhanced hole selecting behavior of WO3 interlayers for efficient indoor organic photovoltaics with high fill-factor
Sungmin Kim et al.
APPLIED SURFACE SCIENCE (2020)
Modifying the nanostructures of PEDOT:PSS/Ti3C2TX composite hole transport layers for highly efficient polymer solar cells
Chunli Hou et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
A universal solution processed interfacial bilayer enabling ohmic contact in organic and hybrid optoelectronic devices
Joel Troughton et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
Solution-Processed Metal Oxide Nanocrystals as Carrier Transport Layers in Organic and Perovskite Solar Cells
Dan Ouyang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Photocatalytic effect of ZnO on the stability of nonfullerene acceptors and its mitigation by SnO2 for nonfullerene organic solar cells
Youyu Jiang et al.
MATERIALS HORIZONS (2019)
All-Oxide MoOx/SnOx Charge Recombination Interconnects for Inverted Organic Tandem Solar Cells
Tim Becker et al.
ADVANCED ENERGY MATERIALS (2018)
A Highly Efficient Non-Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine-Tuned Hole-Transporting Layer
Zhong Zheng et al.
ADVANCED MATERIALS (2018)
Next-generation organic photovoltaics based on non-fullerene acceptors
Pei Cheng et al.
NATURE PHOTONICS (2018)
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Qi Jiang et al.
SMALL (2018)
Preparation and in-system study of SnCl2 precursor layers: towards vacuum-based synthesis of Pb-free perovskites
R. Felix et al.
RSC ADVANCES (2018)
Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors
Jianquan Zhang et al.
NATURE ENERGY (2018)
Revisiting the origin of satellites in core-level photoemission of transparent conducting oxides: The case of &ITn&IT-doped SnO2
Francesco Borgatti et al.
PHYSICAL REVIEW B (2018)
Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Lijian Zuo et al.
NANO LETTERS (2017)
Solution-based electrical doping of semiconducting polymer films over a limited depth
Vladimir A. Kolesov et al.
NATURE MATERIALS (2017)
Overcoming Interfacial Losses in Solution-Processed Organic Multi-Junction Solar Cells
Xiaoyan Du et al.
ADVANCED ENERGY MATERIALS (2017)
High figure of merit transparent conducting Sb-doped SnO2 thin films prepared via ultrasonic spray pyrolysis
Vivi Fauzia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Beating the thermodynamic limit with photo-activation of n-doping in organic semiconductors
Xin Lin et al.
NATURE MATERIALS (2017)
Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing
Ning Li et al.
NATURE COMMUNICATIONS (2017)
Quantitative Morphology-Performance Correlations in Organic Solar Cells: Insights from Soft X-Ray Scattering
Xuechen Jiao et al.
ADVANCED ENERGY MATERIALS (2017)
Triple Dipole Effect from Self-Assembled Small-Molecules for High Performance Organic Photovoltaics
Liqiang Huang et al.
ADVANCED MATERIALS (2016)
Preferential orientation, microstructure and functional properties of SnO2:Sb thin film: The effects of post-growth annealing
Haoran Zheng et al.
APPLIED SURFACE SCIENCE (2016)
Avoiding Photoinduced Shunts in Organic Solar Cells by the Use of Tin Oxide (SnOx) as Electron Extraction Material Instead of ZnO
Sara Trost et al.
ADVANCED ENERGY MATERIALS (2016)
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Zhigang Yin et al.
ADVANCED SCIENCE (2016)
Thermal behaviour of romarchite phase SnO in different atmospheres: a hypothesis about the phase transformation
Carlos M. Campo et al.
HELIYON (2016)
An Air-Stable DPP-thieno-TTF Copolymer for Single-Material Solar Cell Devices and Field Effect Transistors
Sasikumar Arumugam et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells
Chu-Chen Chueh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Effect of intermittent time on structural, optoelectronic, luminescence properties of sprayed antimony doped tin oxide thin films
A. R. Babar et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)
A Universal Interface Layer Based on an Amine-Functionalized Fullerene Derivative with Dual Functionality for Efficient Solution Processed Organic and Perovskite Solar Cells
Hamed Azimi et al.
ADVANCED ENERGY MATERIALS (2015)
Guidelines for Closing the Efficiency Gap between Hero Solar Cells and Roll-To-Roll Printed Modules
Luca Lucera et al.
ENERGY TECHNOLOGY (2015)
An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells
Hyosung Choi et al.
ADVANCED MATERIALS (2015)
Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity
Thomas Heumueller et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Interface Design to Improve the Performance and Stability of Solution-Processed Small-Molecule Conventional Solar Cells
Jie Min et al.
ADVANCED ENERGY MATERIALS (2014)
Fabrication of p-type SnO2 films via pulsed laser deposition method by using Sb as dopant
Shihui Yu et al.
APPLIED SURFACE SCIENCE (2013)
Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells
Fei Chen et al.
NANOTECHNOLOGY (2013)
Efficient polymer bulk heterojunction solar cells with cesium acetate as the cathode interfacial layer
Yuehua Jia et al.
RENEWABLE ENERGY (2013)
n-Doping of Organic Electronic Materials using Air-Stable Organometallics
Song Guo et al.
ADVANCED MATERIALS (2012)
Improvement of Interfacial Contacts for New Small-Molecule Bulk-Heterojunction Organic Photovoltaics
Andres Garcia et al.
ADVANCED MATERIALS (2012)
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Jens Meyer et al.
ADVANCED MATERIALS (2012)
Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability
Sara Trost et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
On the morphology of polymer-based photovoltaics
Feng Liu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
Zhicai He et al.
NATURE PHOTONICS (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
P-type transparent conducting SnO2:Zn film derived from thermal diffusion of Zn/SnO2/Zn multilayer thin films
Jiamiao Ni et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Increasing the Fill Factor of Inverted P3HT:PCBM Solar Cells Through Surface Modification of Al-Doped ZnO via Phosphonic Acid-Anchored C60 SAMs
Tobias Stubhan et al.
ADVANCED ENERGY MATERIALS (2012)
Polymer Solar Cells with a Low-Temperature-Annealed Sol-Gel-Derived MoOx Film as a Hole Extraction Layer
Tingbin Yang et al.
ADVANCED ENERGY MATERIALS (2012)
Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
Kirill Zilberberg et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
MoO3 Films Spin-Coated from a Nanoparticle Suspension for Efficient Hole-Injection in Organic Electronics
Jens Meyer et al.
ADVANCED MATERIALS (2011)
Solution Processed Vanadium Pentoxide as Charge Extraction Layer for Organic Solar Cells
Kirill Zilberberg et al.
ADVANCED ENERGY MATERIALS (2011)
Electrical resistivity of nanocrystalline Al-doped zinc oxide films as a function of Al content and the degree of its segregation at the grain boundaries
B. Nasr et al.
JOURNAL OF APPLIED PHYSICS (2010)
Review on oxides of antimony nanoparticles: synthesis, properties, and applications
Hui Shun Chin et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Electrical, structural, photoluminescence and optical properties of p-type conducting, antimony-doped SnO2 thin films
J. Ni et al.
ACTA MATERIALIA (2009)
Highly Conducting Nanosized Monodispersed Antimony-Doped Tin Oxide Particles Synthesized via Nonaqueous Sol-Gel Procedure
Vesna Muller et al.
CHEMISTRY OF MATERIALS (2009)
P-type doping of organic wide band gap materials by transition metal oxides: A case-study on Molybdenum trioxide
Michael Kroger et al.
ORGANIC ELECTRONICS (2009)
Surface and bulk properties of sputter deposited undoped and Sb-doped SnO2 thin films
Christoph Koerber et al.
SENSORS AND ACTUATORS B-CHEMICAL (2009)
Surface potential changes of semiconducting oxides monitored by high-pressure photoelectron spectroscopy:: Importance of electron concentration at the surface
Y. Gassenbauer et al.
SOLID STATE IONICS (2006)
Device model for the operation of polymer/fullerene bulk heterojunction solar cells
LJA Koster et al.
PHYSICAL REVIEW B (2005)
Electrical, optical and structural properties of Li-doped SnO2 transparent conducting films deposited by the spray pyrolysis technique:: a carrier-type conversion study
MM Bagheri-Mohagheghi et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2004)
Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes
MP de Jong et al.
APPLIED PHYSICS LETTERS (2000)
Near edge X-ray absorption fine structure measurements (XANES) and extended x-ray absorption fine structure measurements (EXAFS) of the valence state and coordination of antimony in doped nanocrystalline SnO2
J Rockenberger et al.
JOURNAL OF CHEMICAL PHYSICS (2000)
分享论文
