4.6 Article

MHD Flow of a Hybrid Nano-Fluid in a Triangular Enclosure with Zigzags and an Elliptic Obstacle

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Multidisciplinary

Unsteady MHD natural convection flow of a nanofluid inside an inclined square cavity containing a heated circular obstacle

M. A. Mansour et al.

Summary: This article presents a numerical investigation of the unsteady magnetohydrodynamics (MHD) natural convection flow in an inclined square cavity filled with nanofluid. The impact of a heated circular obstacle with heat generation/absorption is examined. The study shows that MHD has a dominant effect on the streamlines, isotherms, and average Nusselt number compared to other physical parameters.

INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION (2023)

Article Thermodynamics

Influence of MWCNT/Fe3O4 hybrid nanoparticles on an exponentially porous shrinking sheet with chemical reaction and slip boundary conditions

K. Swain et al.

Summary: This study investigates the impact of variable magnetic field and chemical reaction on hybrid nanofluids on a porous sheet, finding that hybridity enhances temperature and concentration profiles while the suction/injection parameter enhances skin friction coefficient.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Article Thermodynamics

Numerical analysis of heat transfer and friction drag relating to the effect of Joule heating, viscous dissipation and heat generation/absorption in aligned MHD slip flow of a nanofluid

M. Riaz Khan et al.

Summary: This study investigates the two-dimensional aligned MHD incompressible movement of a nano liquid towards a permeable stretching sheet, considering Joule heating, viscous dissipation, and slip condition. Various physical quantities such as heat transfer, velocity, skin friction coefficient, and temperature are analyzed under different parameter estimates.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Heat transfer of nanomaterial with involve of MHD through an enclosure

Juan Zhang et al.

Summary: This study used numerical techniques to investigate the behavior of hybrid nano-powders in a permeable enclosure, taking irreversibility into consideration. The results showed that permeability and magnetic field significantly influenced the fluid flow and nano-powder velocity. Darcy number, Rayleigh number, and Hartmann number also had impacts on temperature and fluid flow characteristics.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Nanoscience & Nanotechnology

Magnetohydrodynamic Free Convection Through Entropy Generation Scrutiny of Eco-Friendly Nanoliquid in a Divided L-Shaped Heat Exchanger with Lattice Boltzmann Method Simulation

M. Ferhi et al.

Summary: This study numerically investigates magnetized conjugate heat transport in a divided L-shaped heat exchanger using the Lattice Boltzmann technique. The results show that heat transport is enhanced by increasing the Ra number, while the strength of the magnetic field reduces heat transport and entropy generation. Furthermore, the Bejan number remains constant for a fixed Ra number but increases with increasing Ra.

JOURNAL OF NANOFLUIDS (2022)

Article Thermodynamics

Entropy generation and heat transport of Cu-water nanoliquid in porous lid-driven cavity through magnetic field

Souad Marzougui et al.

Summary: This study investigates the entropy generation and heat transport in a lid-driven porous enclosure filled with nanoliquid, with a focus on the effects of nanoparticles volume fraction, Darcy number, and Hartmann number on total entropy generation. The presence of porous media and magnetic field reduces the overall entropy generation.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Article Multidisciplinary Sciences

Comparative Investigation of Water-Based Al2O3 Nanoparticles Through Water-Based CuO Nanoparticles Over an Exponentially Accelerated Radiative Riga Plate Surface via Heat Transport

Kanayo K. Asogwa et al.

Summary: This study investigates the flow of water-based alumina and cupric oxide nanoparticles over a vertical plate and analyzes the impact of various factors on the flow properties. The results show that cupric oxide nanoparticles have better heat dissipation compared to alumina nanoparticles due to Lorentz force and higher thermal conductivity. Additionally, heat absorption and reactive species result in a slight decrease in the thermal and velocity fields of alumina nanoparticles.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

Article Thermodynamics

Numerical investigation of the stagnation point flow of radiative magnetomicropolar liquid past a heated porous stretching sheet

A. S. Warke et al.

Summary: This study investigates the two-dimensional magnetohydrodynamic flow of a viscous magnetomicropolar liquid through an extending area, considering the impact of various parameters on velocity. It reveals that velocity is influenced by different liquid types.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Article Thermodynamics

Application of rotating circular obstacles in improving ferrofluid heat transfer in an enclosure saturated with porous medium subjected to a magnetic field

Pouya Barnoon et al.

Summary: This paper investigates the heat transfer rate and fluid flow in an enclosure with rotating circular obstacles, using Fe3O4/water nanofluid to simulate the effects of magnetism. The results show that the different temperature cases and directions of the circular obstacles play a crucial role in flow and heat transfer.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Review Thermodynamics

A review on the properties, preparation, models and stability of hybrid nanofluids to optimize energy consumption

Hamed Eshgarf et al.

Summary: Nanofluids and hybrid nanofluids are new heat transfer media with superior heat transfer characteristics that have gained significant attention. Hybrid nanofluids exhibit more suitable heat transfer performance and thermophysical properties compared to traditional heat transfer fluids and single nanofluids. Current research focuses on investigating the properties, preparation, and stability of hybrid nanofluids.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

Entropy generation analysis in a microchannel Poiseuille flows of nanofluid with nanoparticles injection and variable properties

R. Lucky Monaledi et al.

Summary: In this study, a modified Buongiorno's nanofluid model was used to analyze the impact of nanoparticle injection and distribution on irreversibility in microchannel Poiseuille flow. Numerical solutions showed that nanoparticle aggregation towards the central region of the microchannel reduces skin friction and enhances heat transfer, while nanoparticle injection with Brownian motion decreases entropy generation rate.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Nanoscience & Nanotechnology

Buoyant Convective Flow and Heat Dissipation of Cu-H2O Nanoliquids in an Annulus Through a Thin Baffle

B. Pushpa et al.

Summary: This article numerically investigates the buoyant convective flow and thermal transport enhancement of Cu-H2O nanoliquid in a differentially heated upright annulus having a thin baffle. The average Nu number is enhanced by adding Cu nanoparticles to the base liquid, and it is found that liquid flow and heat transport can be successfully controlled via the appropriate selection of baffle location and length. Specifically, a baffle length equal to 20% of the annular width placed at 80% of the annular height has been found to produce higher thermal transport rates compared to other choices of baffle lengths and positions.

JOURNAL OF NANOFLUIDS (2021)

Article Thermodynamics

Natural convection heat transfer performance of additively manufactured tube bundle heat exchangers with novel fin design

Sebastian Unger et al.

Summary: The study investigated the heat transfer performance of a novel finned heat exchanger design, revealing that integrated pin fin designs can enhance heat conduction and air-side heat transfer efficiency. SIPF showed higher Nusselt number compared to CPF, while CIPF had a lower Nusselt number. The 2-row configuration achieved higher thermal performance and SIPF proved to have better compactness compared to CPF.

HEAT AND MASS TRANSFER (2021)

Article Mathematics, Applied

Free convection of non-Newtonian nanofluid flow inside an eccentric annulus from the point of view of first-law and second-law of thermodynamics

Amin Shahsavar et al.

Summary: This study investigates the hydrothermal and entropy generation characteristics in a naturally cooled eccentric horizontal annulus filled with non-Newtonian water-magnetite/CNT nanofluid. The results show that the average Nusselt number, global thermal EG, and global frictional EG increase with the increase of Rayleigh number and nanoadditive concentration. Additionally, it is found that negative eccentricity has both desirable and undesirable effects on the first and second laws of thermodynamics.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2021)

Article Thermodynamics

Embedding multiple conical vanes inside a circular porous channel filled by two-phase nanofluid to improve thermal performance considering entropy generation

Pouya Barnoon et al.

Summary: The study demonstrates that using specially designed vanes in a circular channel can enhance heat transfer efficiency and meet energy-saving requirements. By optimizing vane arrangement and reducing porosity, more efficient entropy generation can be achieved.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Physics, Multidisciplinary

Similarity solution analysis of dynamic and thermal boundary layers: further formulation along a vertical flat plate

R. Djebali et al.

Summary: This study proposed a simplified formulation of the similarity solution for the boundary layers problem occurring along a vertical heated flat plate under buoyancy effect. The accuracy of the new formulation was verified using a Taylor Series Expansion Model.

PHYSICA SCRIPTA (2021)

Article Nanoscience & Nanotechnology

Thermal Analysis of the Solar Collector Cum Storage System Using a Hybrid-Nanofluids

Kawthar Dhif et al.

Summary: The main problem in the solar energy field is thermal energy storage. A solution proposed is to use a flat-plate solar collector as a storage system, utilizing latent heat of phase change to achieve high energy density. Thermal analysis and computations were conducted to establish an efficient model for near-steady state conditions.

JOURNAL OF NANOFLUIDS (2021)

Article Multidisciplinary Sciences

Numerical Investigations on Heat Transfer Characteristics of Single Particle and Hybrid Nanofluids in Uniformly Heated Tube

Kunal Sandip Garud et al.

Summary: The study evaluates the heat transfer characteristics of water, Al2O3, and Al2O3/Cu nanofluids, analyzing the effects of Reynolds number, volume fraction, and nanoparticle composition on heat transfer properties. Hybrid nanofluids show superior thermophysical properties compared to single particle nanofluids and water, with increasing heat transfer coefficient, Nusselt number, and pressure drop with higher Reynolds number and volume fraction. Overall, 2.0% Al2O3/Cu with equal composition of nanoparticles presented the best heat transfer characteristics among all fluids.

SYMMETRY-BASEL (2021)

Article Thermodynamics

Galerkin finite element analysis of thermal aspects of Fe3O4-MWCNT/water hybrid nanofluid filled in wavy enclosure with uniform magnetic field effect

Abed Mourad et al.

Summary: This paper numerically investigates heat transfer and steady magneto-hydrodynamic natural convection in a porous enclosure with a hot elliptic inner cylinder filled with hybrid Fe3O4-MWCNT /water nanofluid. The study uses Galerkin Finite Element Method (GFEM) to verify the governing equations and observes that the Nu(avg) increases with the growth of Ra, porosity ratio, and Da ratio, but decreases with the growth of Hartmann number.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Entropy and convection effect on magnetized hybrid nano-liquid flow inside a trapezoidal cavity with zigzagged wall

F. Mebarek-Oudina et al.

Summary: This study investigates the laminar flow of a nanoliquid in a trapezoidal cavity and measures the convective exchanges that occur. The results show that the application of a magnetic field strongly influences the flow of the nanofluid, and the thermal performance of the cavity is improved with the increase of Ra and Hartmann numbers.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Multidisciplinary Sciences

Entropy production and mixed convection within trapezoidal cavity having nanofluids and localised solid cylinder

Muhamad S. Ishak et al.

Summary: This study numerically examined entropy production and mixed convection within a trapezoidal nanofluid-filled cavity with a localized solid cylinder. The results showed that the size and location of the solid cylinder are significant control parameters for optimizing heat transfer, with the highest average Nusselt numbers obtained for high R values.

SCIENTIFIC REPORTS (2021)

Article Engineering, Multidisciplinary

Effects of hybrid nanofluid on novel fractional model of heat transfer flow between two parallel plates

Muhammad Danish Ikram et al.

Summary: This paper discusses the fractional model of Brinkman type fluid (BTF) holding hybrid nanoparticles, solving the governing equations using Laplace transform method. The tested outcomes show that the constant proportional Caputo fractional operator (CPC) exhibits better memory effect than Caputo-Fabrizio fractional operator (CF).

ALEXANDRIA ENGINEERING JOURNAL (2021)

Article Education, Scientific Disciplines

Study on natural convection heat transfer in a closed cavity with hot and cold tubes

Jiyu Zheng et al.

Summary: The study investigates laminar natural convection with a pair of hot and cold tubes in a closed cubic cavity, focusing on the influence of Ra number, tube shape, and spatial position on heat transfer characteristics. Results show that Nu number increases with Ra number, with higher Nu numbers observed for circular and triangular shapes. Additionally, placing the cold tube above the hot tube among five spatial positions enhances heat transfer efficiency. These findings provide a theoretical basis for the performance of nuclear power plant containment passive residual heat removal system.

SCIENCE PROGRESS (2021)

Article Energy & Fuels

Thermodynamically consistent Darcy-Brinkman-Forchheimer framework in matrix acidization☆

Yuanqing Wu et al.

Summary: This study enhances the traditional DBF framework by proposing the improved DBF framework and thermal DBF framework, both of which have been validated through experiments. The parallelization of complex framework codes has been achieved, demonstrating good scalability.

OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2021)

Article Thermodynamics

Heat transport and stagnation-point flow of magnetized nanoliquid with variable thermal conductivity, Brownian moment, and thermophoresis aspects

Kharabela Swain et al.

Summary: The study proposes a numerical analysis of the flow and heat transport of nanoliquids with variable thermal conductivity near an extendable surface under the influence of a magnetic field. The attributes of nanoliquids explain Brownian motion and thermophoresis diffusion, positively affecting the thermal field.

HEAT TRANSFER (2021)

Article Thermodynamics

Experimental investigation of natural convection heat transfer of SiO2/water nanofluid inside inclined enclosure

Maryam Torki et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Article Thermodynamics

Heat transport of magnetized Newtonian nanoliquids in an annular space between porous vertical cylinders with discrete heat source

Fateh Mebarek-Oudina et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Engineering, Mechanical

Cu-Al2O3 hybrid nanofluid natural convection in an inclined enclosure with wavy walls partially layered by porous medium

Hakim T. Kadhim et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Multidisciplinary Sciences

Mixed Convective Magneto Flow of SiO2-MoS2/C2H6O2 Hybrid Nanoliquids Through a Vertical Stretching/Shrinking Wedge: Stability Analysis

Umair Khan et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Review Thermodynamics

A comprehensive review on natural convection flow and heat transfer The most practical geometries for engineering applications

Alireza Rahimi et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Review Thermodynamics

Thermal conductivity of hybrid nanofluids: A critical review

Muhammad Usman Sajid et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Review Nanoscience & Nanotechnology

A Review on Nanofluids: Fabrication, Stability, and Thermophysical Properties

Naser Ali et al.

JOURNAL OF NANOMATERIALS (2018)

Review Thermodynamics

Studies on natural convection within enclosures of various (non-square) shapes - A review

Debayan Das et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Engineering, Aerospace

Analysis of Condensation Heat Transfer Performance in Curved Triangle Microchannels Based on the Volume of Fluid Method

Yuchuan Lei et al.

MICROGRAVITY SCIENCE AND TECHNOLOGY (2017)

Article Thermodynamics

Analysis of entropy generation during natural convection in discretely heated porous square and triangular enclosures

Debayan Das et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2017)

Article Engineering, Mechanical

Impact of aspect ratio on a nanofluid-saturated porous enclosure

M. Muthtamilselvan et al.

MECHANICS & INDUSTRY (2017)

Article Thermodynamics

Numerical analysis of natural convection in a triangular cavity with different configurations of hot wall

Manoj K. Triveni et al.

INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (2017)

Article Engineering, Multidisciplinary

Magnetohydrodynamic double diffusive natural convection in trapezoidal cavities

Mohamed A. Teamah et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Article Thermodynamics

Combined effects of magnetic and electrical field on the hydrodynamic and thermophysical parameters of magnetoviscous fluid flow

Selcuk Selimli et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Review Green & Sustainable Science & Technology

A review on hybrid nanofluids: Recent research, development and applications

Jahar Sarkar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Thermodynamics

Effect of magnetic field on natural convection in a triangular enclosure filled with nanofluid

Amir Houshang Mahmoudi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Article Thermodynamics

Buoyancy Driven Heat Transfer of Nanofluids in a Tilted Enclosure

Kamil Kahveci

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)

Article Materials Science, Multidisciplinary

Investigation on characteristics of thermal conductivity enhancement of nanofluids

Y. J. Hwang et al.

CURRENT APPLIED PHYSICS (2006)

Article Thermodynamics

Effect of aspect ratio on forced convection heat transfer from cylinders

BH Chang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)