4.6 Article

Minimizing Oxygen Permeability in Chitin/Cellulose Nanomaterial Coatings by Tuning Chitin Deacetylation

期刊

ACS SUSTAINABLE CHEMISTRY & ENGINEERING
卷 10, 期 1, 页码 124-133

出版社

AMER CHEMICAL SOC
DOI: 10.1021/acssuschemeng.1c05051

关键词

chitin nanowhiskers; cellulose nanocrystals; multilayer coating; oxygen permeability; Taguchi method

资金

  1. Department of Energy (DOE) [EE0008494]
  2. U.S. DOE [DE-AC36-08GO28308]
  3. National Science Foundation [ECCS-2025462]

向作者/读者索取更多资源

By adjusting the deacetylation conditions of chitin, nanowhiskers with different characteristics were prepared and spray-coated with cellulose nanocrystal suspensions onto cellulose acetate films to form a multilayer structure. The optimized film showed a significant decrease in oxygen permeability.
The demand for packaging materials with low gas permeabilities is increasing, but commonly used petroleum-derived single-use plastics are not renewable, biodegradable, or easy to recycle. Nanomaterials composed of chitin and cellulose, which are abundant in nature, have high crystallinities and low oxygen permeabilities (OPs), providing a viable alternative. In this work, we explore how deacetylation conditions of crab shell chitin can be used to tune the charge and size of the resulting chitin nanowhiskers (ChNWs) and the resulting OP of layered film structures. Three deacetylation factors, the concentration of sodium hydroxide (% NaOH), temperature (T), and reaction time, were explored using a three-factor three-level Taguchi design with an orthogonal array. The resulting ChNW suspensions were sequentially spray-coated with suspensions of cellulose nanocrystals (CNCs) onto cellulose acetate (CA) films to form a multilayer structure. We show that ChNWs prepared under more aggressive deacetylation conditions inside the original orthogonal array (higher % NaOH, T, and time) had shorter lengths but the surface charge was significantly influenced only by more aggressive deacetylation outside of the original design conditions. With only similar to 10% decrease in the ultimate tensile strength and no significant loss in failure strain, the ChNW-CNC coating resulted in similar to 20% decrease in the water vapor transmission rate in comparison to uncoated CA films. The optimization of process conditions resulted in CA-ChNW-CNC films with a 91-99% decrease in OP (132-16.7 cm(3).mu m/m(2)/day/kPa vs 1553 cm(3).mu m/m(2)/day/kPa for uncoated CA).

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.6
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据