4.6 Article

Preparation of Magnetic Surface Ion-Imprinted Polymer Based on Functionalized Fe3O4 for Fast and Selective Adsorption of Cobalt Ions from Water

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

The performance of activated carbon/NiFe2O4 magnetic composite to retain heavy metal ions from aqueous solution

S. Moussa et al.

Summary: A novel magnetic activated carbon composite was synthesized and applied in retention of Cu(II) and Zn(II) ions. The composite showed higher retention ability towards both metal ions compared to activated carbon, with a preference for adsorbing Cu(II) over Zn(II) ions. Additionally, the composite was effectively regenerated using specific eluents and exhibited promising adsorption and magnetic separation capabilities.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Magnetic ion-imprinted polymer based on mesoporous silica for selective removal of Co(II) from radioactive wastewater

Hyun-Kyu Lee et al.

Summary: A magnetically separable Co(II)-imprinted polymer based on mesoporous silica was synthesized for selective removal of Co(II), showing increased adsorption capacity with higher amounts of the imprinted polymer layer. The material exhibited selective Co(II) adsorption even in the presence of competing ions, and thermodynamic experiments indicated an endothermic and spontaneous adsorption process.

SEPARATION SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Oxalated blast-furnace slag for the removal of Cobalt(II) ions from aqueous solutions

Quynh Thi Ngoc Le et al.

Summary: This study converted an original blast-furnace slag, an industrial waste material, into Slag-Oxalate to capture Co2+. The obtained material showed a high adsorption capacity and fast adsorption rate, with ion exchange being the main mechanism. Additionally, Slag-Ox was able to remove Cs+ and Sr2+ ions from multi-metal aqueous solutions, indicating its potential for remediating contaminated waters.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Review Engineering, Chemical

Geometallurgy of cobalt ores: A review

Quentin Dehaine et al.

Summary: Cobalt is a crucial transition metal with unique physical properties needed for high-tech applications, but its recovery efficiency is generally low due to the variability of cobalt ores. Understanding the geometallurgical properties of cobalt ores, such as ore mineralogy, is important in developing extraction processes. Further research is needed for sustainable cobalt sourcing and processing.

MINERALS ENGINEERING (2021)

Article Engineering, Environmental

Selective and rapid removal of Mo(VI) from water using functionalized Fe3O4-based Mo(VI) ion-imprinted polymer

Lang Wu et al.

Summary: A magnetic Mo(VI) surface ion-imprinted polymer (Mo(VI)-MIIP) based on Fe3O4 nanoparticles was successfully prepared and characterized, showing high adsorption capacity and selectivity for Mo(VI) in various binary mixtures. The material exhibited excellent performance in adsorption experiments and demonstrated good reusability after multiple cycles.

WATER SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Disulfide Cross-Linked Poly(Methacrylic Acid) Iron Oxide Nanoparticles for Efficiently Selective Adsorption of Pb(II) from Aqueous Solutions

Rui Wang et al.

Summary: The study developed novel Fe3O4@S-S/PMAA nanoparticles with selective adsorption, improved adsorption capability, and economic reusability for selective removal of Pb(II) ions from aqueous solution. Various characterization techniques were utilized to study the physicochemical properties of Fe3O4@S-S/PMAA, and batch adsorption experiments were performed to investigate the adsorption properties of the nanoparticles for Co(II) and Pb(II) ions. The results showed that the Fe3O4@S-S/PMAA nanoparticles exhibited high adsorption capacity for Pb(II) ions with good regeneration efficiency, providing a potential technical platform for selective removal of heavy metal ions from contaminated water.

ACS OMEGA (2021)

Article Environmental Sciences

Efficient adsorptive removal of Cobalt(II) ions from water by dicalcium phosphate dihydrate

Eleazer L. Vivas et al.

Summary: This study investigated the batch adsorption performance of dicalcium phosphate dihydrate (DCPD) as a potential cobalt adsorbent. Stable cobalt uptake was observed at pH 4-8, with the structure analysis revealing decomposition of DCPD during adsorption and involvement of multiple mechanisms in the process. Additionally, intraparticle diffusion contributed to the overall removal kinetics of Co2+ from water.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Article Chemistry, Physical

Preparation of thermo-sensitive surface ion-imprinted polymers based on multi-walled carbon nanotube composites for selective adsorption of lead(II) ion

Haoqing Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Engineering, Environmental

Continuous Separation of Radionuclides from Contaminated Water by Shock Electrodialysis

Mohammad A. Alkhadra et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Engineering, Environmental

Utilization of nano-olive stones in environmental remediation of methylene blue from water

Mohammad A. Al-Ghouti et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Novel dual-template magnetic ion imprinted polymer for separation and analysis of Cd2+ and Pb2+ in soil and food

Chunsheng Xie et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Chemical

Amino group functionalized SiO2@graphene oxide for efficient removal of Cu(II) from aqueous solutions

Min Li et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Article Environmental Sciences

Development of magnetic porous coordination polymer adsorbent for the removal and preconcentration of Pb(II) from environmental water samples

Aisha Mohammed Al'Abri et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Environmental Sciences

Preparation of a novel magnetic Pd(II) ion-imprinted polymer for the fast and selective adsorption of palladium ions from aqueous solutions

Fatemeh Shafizadeh et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Review Engineering, Chemical

Magnetically responsive porous materials for efficient adsorption and desorption processes

Peng Tan et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)

Article Chemistry, Physical

Green multi-functional monomer based ion imprinted polymers for selective removal of copper ions from aqueous solution

Liyan Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Environmental Sciences

Carboxymethyl cellulose thiol-imprinted polymers: Synthesis, characterization and selective Hg(II) adsorption

Tarisai Velempini et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2019)

Article Engineering, Environmental

Preparation of highly selective magnetic cobalt ion-imprinted polymer based on functionalized SBA-15 for removal Co2+ from aqueous solutions

Zahra Adibmehr et al.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING (2019)

Article Engineering, Environmental

Fabrication and binding characterization of ion imprinted polymers for highly selective Co2+ ions in an aqueous medium

Noor Fadilah Yusof et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Biochemistry & Molecular Biology

Synthesis and characterization of novel ion-imprinted guanyl-modified cellulose for selective extraction of copper ions from geological and municipality sample

I. M. Kenawy et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Article Chemistry, Multidisciplinary

Biological Leaching and Chemical Precipitation Methods for Recovery of Co and Li from Spent Lithium-Ion Batteries

Basanta Kumar Biswal et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Polymer Science

Synthesis of copper(II) ion-imprinted polymers via suspension polymerization

Angkana Chaipuang et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Article Biochemistry & Molecular Biology

Aqueous Co(II) adsorption using 8-hydroxyquinoline anchored γ-Fe2O3@chitosan with Co(II) as imprinted ions

Mostafa Hossein Beyki et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Article Biochemistry & Molecular Biology

Covalent immobilization of α-amylase on magnetic particles as catalyst for hydrolysis of high-amylose starch

Hui Guo et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Article Materials Science, Biomaterials

Synthesis and application of novel ion-imprinted polymer coated magnetic multi-walled carbon nanotubes for selective solid phase extraction of lead(II) ions

Maryam Fayazi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Chemistry, Applied

Adsorption of molybdate on molybdate-imprinted chitosan/triethanolamine gel beads

Liang Zhang et al.

CARBOHYDRATE POLYMERS (2014)

Article Chemistry, Applied

Ion-imprinted mesoporous silica hybrids for selective recognition of target metal ions

Madhappan Santha Moorthy et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Article Polymer Science

Synthesis of tri-layer hybrid microspheres with magnetic core and functional polymer shell

Guangyu Liu et al.

EUROPEAN POLYMER JOURNAL (2009)