相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Fused filament fabrication of polymer materials: A review of interlayer bond
Xia Gao et al.
ADDITIVE MANUFACTURING (2021)
Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing
Wattanachai Prasong et al.
POLYMERS (2021)
Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM
K. Sathish Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
G. D. Goh et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Influence of manufacturing parameters on the mechanical properties of projection stereolithography-manufactured specimens
D. Ambrosio et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A review on 3D printed matrix polymer composites: its potential and future challenges
Jabran Saroia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Anisotropy of poly(lactic acid)/carbon fiber composites prepared by fused deposition modeling
Qingjun Ding et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Optimization and Quality Evaluation of the Interlayer Bonding Performance of Additively Manufactured Polymer Structures
Patrick Striemann et al.
POLYMERS (2020)
Interlayer bonding has bulk-material strength in extrusion additive manufacturing: New understanding of anisotropy
James Allum et al.
ADDITIVE MANUFACTURING (2020)
3D printed conductive thermoplastic polyurethane/carbon nanotube composites for capacitive and piezoresistive sensing in soft pneumatic actuators
Cameron J. Hohimer et al.
ADDITIVE MANUFACTURING (2020)
Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing
Nadim S. Hmeidat et al.
ADDITIVE MANUFACTURING (2020)
Anisotropic material behavior of 3D printed composite structures - Material extrusion additive manufacturing
M. Somireddy et al.
MATERIALS & DESIGN (2020)
Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
Enrique Cuan-Urquizo et al.
MATERIALS (2019)
Mechanical, electrical, and piezoresistivity behaviors of additively manufactured acrylonitrile butadiene styrene/carbon nanotube nanocomposites
Dominic Thaler et al.
SMART MATERIALS AND STRUCTURES (2019)
Controlling anisotropy in stereolithographically printed polymers
Dale L. Huber
JOURNAL OF MATERIALS SCIENCE (2019)
Influence of Powder Deposition on Powder Bed and Specimen Properties
Steffen Beitz et al.
MATERIALS (2019)
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Guo Dong Goh et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Effects of cold plasma treatment on interlayer bonding strength in FFF process
Chin-Cheng Shih et al.
ADDITIVE MANUFACTURING (2019)
Characterization of the anisotropic thermal conductivity of additively manufactured components by fused filament fabrication
Ahmed Elkholy et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
First observation of the effect of the layer printing sequence on the molecular structure of three-dimensionally printed polymer, as shown by in-plane capacitance measurement
Naga B. Gundrati et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Torsion analysis of the anisotropic behavior of FDM technology
Cesar Omar Balderrama-Armendariz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
Neiko P. Levenhagen et al.
POLYMER (2018)
Tribological anisotropy of selective laser sintered PA12 parts
Andreas Woerz et al.
POLYMER TESTING (2018)
Effect of build orientation on the strength and cost of PolyJet 3D printed parts
Sai Charan Das et al.
RAPID PROTOTYPING JOURNAL (2018)
Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites
Yah Yun Aw et al.
MATERIALS (2018)
Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
Aboma Wagari Gebisa et al.
MATERIALS (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
3-D printer settings effects on the thermal conductivity of acrylonitrile butadiene styrene (ABS)
Tyler Sonsalla et al.
POLYMER TESTING (2018)
The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
Adrian Rodriguez-Panes et al.
MATERIALS (2018)
Effect of process parameters on tensile strength of FDM printed PLA part
Shilpesh R. Rajpurohit et al.
RAPID PROTOTYPING JOURNAL (2018)
Characterization of mechanical properties of additively manufactured polymers and composites
Rolf Walter et al.
9TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY (2018)
O Mechanical characterization of 3D-printed polymers
John Ryan C. Dizon et al.
ADDITIVE MANUFACTURING (2018)
Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process
N. Jayanth et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Measurement of anisotropic thermal conductivity and inter-layer thermal contact resistance in polymer fused deposition modeling (FDM)
Hardikkumar Prajapati et al.
ADDITIVE MANUFACTURING (2018)
Dielectric strength heterogeneity associated with printing orientation in additively manufactured polymer materials
Brad W. Hoff et al.
ADDITIVE MANUFACTURING (2018)
Effect of nanoparticles on the mechanical properties of acrylonitrile-butadiene-styrene specimens fabricated by fused deposition modeling
Shuna Meng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
Fuda Ning et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Structural, mechanical, and thermal properties of 3D printed L-CNC/acrylonitrile butadiene styrene nanocomposites
Xinhao Feng et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Estimation of filament temperature and adhesion development in fused deposition techniques
S. F. Costa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints
Volkan Kovan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymer
Maksym Rybachuk et al.
JOURNAL OF POLYMER ENGINEERING (2017)
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Neiko P. Levenhagen et al.
POLYMER (2017)
Bond and part strength in fused deposition modeling
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Role of anisotropic properties on topology optimization of additive manufactured load bearing structures
Pu Zhang et al.
SCRIPTA MATERIALIA (2017)
Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
Jie Zhang et al.
APPLIED SCIENCES-BASEL (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Daniel-Alexander Tuerk et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Anisotropy of Photopolymer Parts Made by Digital Light Processing
Mario Monzon et al.
MATERIALS (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS
Tait D. McLouth et al.
ADDITIVE MANUFACTURING (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Investigations for Thermal and Electrical Conductivity of ABS-Graphene Blended Prototypes
Rupinder Singh et al.
MATERIALS (2017)
Anisotropy of thermal conductivity in 3D printed polymer matrix composites for space based cube satellites
Corey Shemelya et al.
ADDITIVE MANUFACTURING (2017)
High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing
Yunchao Jia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components
Vidya Kishore et al.
ADDITIVE MANUFACTURING (2017)
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties
Qiyi Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression
Sofiane Guessasma et al.
EUROPEAN POLYMER JOURNAL (2016)
High performance polymer nanocomposites for additive manufacturing applications
Al C. de Leon et al.
REACTIVE & FUNCTIONAL POLYMERS (2016)
An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing
Abinesh Kurapatti Ravi et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
Jianlei Wang et al.
MATERIALS & DESIGN (2016)
A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite
K. G. Jaya Christiyan et al.
2ND INTERNATIONAL MANUFACTURING ENGINEERING CONFERENCE AND 3RD ASIA-PACIFIC CONFERENCE ON MANUFACTURING SYSTEMS (IMEC-APCOMS 2015) (2016)
Failure Analysis and Anisotropy Evaluation of 3D-Printed Tensile Test Specimens of Different Geometries and Print Raster Patterns
Angel R. Torrado et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)
Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation
Behzad Rankouhi et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Jonathan Torres et al.
JOM (2015)
Significance of pore percolation to drive anisotropic effects of 3D printed polymers revealed with X-ray μ-tomography and finite element computation
Sofiane Guessasma et al.
POLYMER (2015)
Expanding the applicability of FDM-type technologies through materials development
David Roberson et al.
RAPID PROTOTYPING JOURNAL (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
Angel R. Torrado et al.
ADDITIVE MANUFACTURING (2015)
On reducing anisotropy in 3D printed polymers via ionizing radiation
Steven Shaffer et al.
POLYMER (2014)
Mechanical properties of commercial rapid prototyping materials
Jaroslaw Kotlinski
RAPID PROTOTYPING JOURNAL (2014)
Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts
Miquel Domingo-Espin et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2014)
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)
Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30
Dario Croccolo et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
3D printing of multifunctional nanocomposites
Thomas A. Campbell et al.
NANO TODAY (2013)
Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process
Antreas Kantaros et al.
MATERIALS & DESIGN (2013)
Fatigue analysis of FDM materials
John Lee et al.
RAPID PROTOTYPING JOURNAL (2013)
Anisotropy, homogeneity and ageing in an SLS polymer
William Cooke et al.
RAPID PROTOTYPING JOURNAL (2011)
Effect of section thickness and build orientation on tensile properties and material characteristics of laser sintered nylon-12 parts
Candice Majewski et al.
RAPID PROTOTYPING JOURNAL (2011)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
Experimental investigations for improving part strength in selective laser sintering
Prashant K. Jain et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2008)
Investigating mechanical anisotropy and end-of-vector effect in laser-sintered nylon parts
U. Ajoku et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Optimization of rapid prototyping parameters for production of flexible ABS object
BH Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation
JF Rodriguez et al.
RAPID PROTOTYPING JOURNAL (2001)
分享论文
