☆ 4.7 Article

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

POLYMERS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

Flax/basalt/E-glass Fibers Reinforced Epoxy Composites with Enhanced Mechanical Properties

M. A. Abd El-Baky et al.

Summary: The mechanical properties of flax/basalt/E-glass fibers reinforced epoxy composites were studied in this research, which investigated the effects of fiber relative amounts and stacking sequence on the tensile, flexural, and impact properties. The results showed that replacing partial laminas with basalt and/or glass fiber reinforced epoxy laminas could enhance the tensile, flexural, and impact strengths. Additionally, incorporating high strength fibers to the outer layers of the composite improved flexural and impact resistances, while having the opposite effect on tensile properties.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigations on drilling of hybrid basalt/glass polyester composites

Nayan Patel et al.

Summary: This study focuses on using hybrid fiber-reinforced composites to address the limitations of single fiber reinforcements. Drilling investigations and analysis of different input factors and responses were conducted, and design of experiment and ANOVA were used to determine the influence and contribution of machining parameters. Grey relational analysis was employed to obtain optimal results.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Effect of stacking sequence on the performance of hybrid natural/synthetic fiber reinforced polymer composite laminates

Subrata C. Das et al.

Summary: The study investigated the effect of stacking sequence on natural fiber, synthetic fiber, and hybrid composites, finding that neat glass/polyester laminates exhibited better mechanical performance than others, with glass fiber hybridization significantly influencing properties. Additionally, gamma irradiation improved the mechanical properties of the composites by increasing tensile strength, bending strength, tensile modulus, and bending modulus for each composite type.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Polymer Science

Dynamic-Mechanical and Decomposition Properties of Flax/Basalt Hybrid Laminates Based on an Epoxidized Linseed Oil Polymer

Dana Luca Motoc et al.

Summary: This study focused on the development of flax and flax/basalt hybrid reinforced composites using epoxidized linseed oil resin, with different ratios of glutaric anhydride and maleinized linseed oil in the hardener system. The addition of glutaric anhydride resulted in hard and brittle laminates, while increasing MLO content led to a decrease in brittleness of the crosslinked resin. The thermal analysis showed shifts in glass transition temperatures and final degradation temperatures with varying MLO content.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Investigation on Flexural Behavior of Geopolymer-Based Carbon Textile/Basalt Fiber Hybrid Composite

Chi Hiep Le et al.

Summary: Experimental research on the mechanical properties of hybrid composite thin-plates composed of short basalt fibers (CBFs) and carbon textile-reinforced geomortar was conducted. The findings showed that adding CBFs with lengths of 12 mm and 24 mm improved both static and dynamic flexural strength in geomortar, but did not have a positive effect on the failure mode of the specimens. The study also highlighted the importance of the anchoring capacity of textile layers in geomortar on specimen strength, as revealed by the Charpy impact test results.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Basalt Fibre Composite with Carbon Nanomodified Epoxy Matrix under Hydrothermal Ageing

Tatjana Glaskova-Kuzmina et al.

Summary: The study investigated the effect of hybrid carbon nanofillers on the electrical and flexural properties for an epoxy matrix and basalt fiber reinforcing composite subjected to seasonal water absorption. Results showed minimal changes in mechanical properties after environmental ageing. Nanomodified BFRCs exhibited slightly higher effects on flexural characteristics due to higher defectiveness. Nanocomposites showed higher electrical conductivity, with UD BFRC/NC showing significantly improved conductivity after hydrothermal ageing, enhancing damage monitoring capabilities.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Composites

Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design

Ariff Farhan Mohd Nor et al.

Summary: This study utilized response surface methodology to model and optimize four independent parameters of kenaf/multi-walled carbon nanotubes (MWCNTs) hybrid composites, with the results indicating that kenaf fiber loading had the highest impact on the tensile properties.

APPLIED COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Novel Muntingia Calabura bark fi ber reinforced green-epoxy composite: A sustainable and green material for cleaner production

A. Vinod et al.

Summary: This study focused on developing and enhancing the properties of novel Muntingia calabura bark micro-fiber reinforced bio-epoxy composite through surface modification techniques using NaOH and silane. The results showed that the modified fibers had improved characteristics compared to raw fibers, with silane treatment being more effective. This novel plant fiber has the potential to be an environmentally friendly and sustainable resource for reinforcement in polymer composites.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Polymer Science

Physicomechanical Properties of Rice Husk/Coco Peat Reinforced Acrylonitrile Butadiene Styrene Blend Composites

Nurul Haziatul Ain Norhasnan et al.

Summary: This study evaluates the effectiveness of utilizing agro-waste materials to produce low-cost green composites with desirable physical, mechanical, and thermal properties. The 15% RH-5% CP reinforced ABS composite showed the highest mechanical properties, while all RH/CP filled composites exhibited brittle fracture behavior. Observation using SEM confirmed the findings, suggesting potential for short life engineering applications.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Effect of Plasma Treatment on the Impact Behavior of Epoxy/Basalt Fiber-Reinforced Composites: A Preliminary Study

Maria Rosaria Ricciardi et al.

Summary: This paper investigates the effect of one-step sulfur hexafluoride (SF6) plasma treatment on the low velocity impact behavior of basalt/epoxy composites, finding that treating with SF6 plasma increases the hydrophobicity and impact resistance of the composites. Plasma-treated basalt systems showed damage in a confined area and higher impact resistance compared to untreated systems.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Nanomodification, Hybridization and Temperature Impact on Shear Strength of Basalt Fiber-Reinforced Polymer Bars

Karolina Ogrodowska et al.

Summary: This paper investigated the impact of fiber-reinforced polymer composites modified by fibers hybridization and matrix nanomodification with nanosilica on key properties for reinforcing concrete structures, using a comparative analysis based on shear tests. The results showed differences in performance of the composites under different temperature conditions.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Recent Progress of Rice Husk Reinforced Polymer Composites: A Review

Mohamed Azlan Suhot et al.

Summary: This review paper examines the use of rice husk as a reinforcing fiber in synthetic polymers, discussing the potential of advanced modification techniques to enhance composite performance. It also explores thermal properties and the interaction between fibers and matrices, providing insights for future applications of agricultural waste fibers. The study concludes by reviewing the prospects for research on rice husk polymer composites.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Comparative Failure Study of Different Bonded Basalt Fiber-Reinforced Polymer (BFRP)-AL Joints in a Humid and Hot Environment

Yisa Fan et al.

Summary: This study investigated the influence of high temperature and high humidity on the bonding structure between basalt fiber-reinforced resin composite materials (BFRP) and aluminum alloy (Al) using two adhesives. It was found that Araldite (R) 2012 is more affected by moisture, while Araldite (R) 2014 has a shorter time to reach maximum water absorption. The failure strength of the joints showed different trends under high temperature aging, with Araldite (R) 2014 joints increasing in strength initially before decreasing, while Araldite (R) 2012 joints showed a continuous decrease.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites

N. Mohd Nurazzi et al.

POLIMERY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites

N. Mohd Nurazzi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites

S. M. Vinu Kumar et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Materials Science, Composites

On the impact of flax fibers as an internal layer on the properties of basalt-epoxy composites modified with silanized basalt powder

Danuta Matykiewicz et al.

COMPOSITES COMMUNICATIONS (2020)

添加到收藏夹

Article Polymer Science

Mercerization Optimization of Bamboo (Bambusa vulgaris) Fiber-Reinforced Epoxy Composite Structures Using a Box-Behnken Design

Mohamad Zaki Hassan et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites

S. M. Sapuan et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal characterization of date palm/epoxy composites with fillers from different parts of the tree

Othman Y. Alothman et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Composites

Dynamic and thermo-mechanical properties of hybridized kenaf/PALF reinforced phenolic composites

Mohammad Asim et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Engineering, Manufacturing

Engineering the interfacial adhesion in basalt/epoxy composites by plasma polymerization

M. C. Seghini et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Review Automation & Control Systems

Mechanical evaluation of hybrid natural fibre-reinforced polymeric composites for automotive bumper beam: a review

O. T. Adesina et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology

Mohamad Zaki Hassan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of basalt fiber hybridization on the vibration-damping properties of glass fiber reinforced epoxy laminates

Omer Yavuz Bozkurt et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Mechanics

Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites

Tolera A. Negawo et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Impact of BaSO4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis

M. Arulmurugan et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Proceedings Paper Physics, Applied

Effect of Rice Husk Ash Filler of Resistance Against of High-Speed Projectile Impact on Polyester-Fiberglass Double Panel Composites

N. Koto et al.

INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS, 2018 (2019)

添加到收藏夹

Article Mechanics

Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

A. Atiqah et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Composites from poly(lactic acid) and bleached chemical fibres: Thermal properties

F. X. Espinach et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Polymer Science

Evaluation of polypropylene hybrid composites containing glass fiber and basalt powder

Mateusz Barczewski et al.

JOURNAL OF POLYMER ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites

M. S. El-Wazery

INTERNATIONAL JOURNAL OF ENGINEERING (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Development Of Flax Fibre Reinforced Epoxy Composite With Nano Tio2 Addition Into Matrix To Enhance Mechanical Properties

Vishnu Prasad et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Review Polymer Science

Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials

Guolong Wang et al.

PROGRESS IN POLYMER SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Influence of Thermo-Oxidative Ageing on the Thermal and Dynamical Mechanical Properties of Long Glass Fibre-Reinforced Poly(Butylene Terephthalate) Composites Filled with DOPO

Daohai Zhang et al.

MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process

V. R. Arun Prakash et al.

DEFENCE TECHNOLOGY (2017)

添加到收藏夹

Article Polymer Science

Thermal oxidation of vinyl ester and unsaturated polyester resins

Juan Sebastian Arrieta et al.

POLYMER DEGRADATION AND STABILITY (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.