☆ 4.7 Review

Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost

POLYMERS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

Experimental Investigation on Mechanical and Biodegradation Properties of Indian Almond-Kenaf Fiber-Reinforced Hybrid Composites for Construction Applications

E. Narayanan Nampoothiri et al.

Summary: Tri-layer hybrid composites composed of Indian almond and kenaf fibers were fabricated using the hand layup method. Two types of hybrid composites, K/I/K and I/K/I, were prepared and tested for their mechanical properties and durability. The results showed that the K/I/K composite, with high-strength kenaf fibers as the outer layer, exhibited the highest tensile and flexural strength, while the I/K/I composite, with Indian almond fibers as the outer layer, showed the highest impact strength and moisture absorption rate.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Mechanical, chemical and sound absorption properties of glass/kenaf/waste tea leaf fiber-reinforced hybrid epoxy composites

L. Prabhu et al.

Summary: This work investigates the mechanical and sound absorption characteristics of industrial waste tea leaf fiber, kenaf, and E-glass fiber-reinforced hybrid epoxy composites through experimental studies. The results reveal that certain ratios of fibers exhibit better performance in terms of mechanical properties and sound absorption characteristics.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Review Environmental Sciences

Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic

M. M. Harussani et al.

Summary: The COVID-19 pandemic has resulted in a significant increase in PP plastic waste, prompting the need for alternative methods such as pyrolysis to convert this waste into renewable energy. This paper summarizes the process of pyrolysis for PP plastic waste, highlighting the key parameters affecting product yields and optimization strategies for solid char production.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute-Ramie Composites

C. Tezara et al.

Summary: The research analyzed the effect of stacking sequences, fibre orientations, and alkali treatment on the mechanical properties of hybrid jute and ramie reinforced vinyl ester composites. It was found that composites with 0 degrees fibre orientation showed significantly higher tensile and flexural strength, and combining fibre orientation with lower alkali treatment concentration can improve the mechanical properties of the composites.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Textiles

Crashworthiness Response of Filament Wound Kenaf/Glass Fibre-reinforced Epoxy Composite Tubes with Influence of Stacking Sequence under Intermediate-velocity Impact Load

A. B. M. Supian et al.

Summary: The study investigates the use of hybrid kenaf/glass composite tubes for enhanced crashworthiness properties under intermediate-velocity impact load conditions. By adjusting the stacking sequences of hybrid fibers, it was found that specimens with a higher kenaf fiber fraction mass had a 68% increase in energy absorbing value compared to synthetic glass composite tubes, with more stable failure mode behavior.

FIBERS AND POLYMERS (2022)

添加到收藏夹

Review Materials Science, Textiles

Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review

Zatil Hafila Kamaruddin et al.

Summary: This review discusses the structure, applications, and properties of lemongrass, emphasizing its extensive use in pharmacological activities and as a source of cellulose. The importance of lemongrass as a raw material for various industries is highlighted, along with a review of recent studies on emergent types of lemongrass fibers.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Extraction and Characterization of Natural Fiber from Stem of Cardiospermum Halicababum

A. Vinod et al.

Summary: This study investigates the properties of lignocellulose fiber from the stem of Cardiospermum Halicababum. Analysis revealed that CHF contains high levels of cellulose, hemicellulose, and lignin, with a substantial crystallinity index and thermal stability. CHF demonstrates a high tensile strength and morphology characteristics indicating minimal lacuna space between cell walls.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Materials Science, Textiles

Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)

R. A. Ilyas et al.

Summary: In this study, sugar palm nanocrystalline celluloses (SPNCCs) were isolated from sugar palm fiber (SPF) through acid hydrolysis at different reaction times. It was found that a shorter reaction time tended to produce SPNCC with higher thermal stability.

TEXTILE RESEARCH JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Effect of fiber content and their hybridization on bending and torsional strength of hybrid epoxy composites reinforced with carbon and sugar palm fibers

N. M. Z. Nik Baihaqi et al.

Summary: This study investigates the effect of fiber hybridization of sugar palm yarn fiber with carbon fiber reinforced epoxy composites, finding that the hybrid composite exhibits superior mechanical properties compared to non-hybrid composites. The performance of hybrid composites in terms of flexural and torsion properties varies with different ratios of fiber loading.

POLIMERY (2021)

添加到收藏夹

Article Polymer Science

The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites

Fatimah Athiyah Sabaruddin et al.

Summary: The thermal, thermo-mechanical and flammability properties of kenaf core hybrid polymer nanocomposites reinforced with unbleached and bleached nanocrystalline cellulose were studied. Unbleached NCC had higher lignin content and better stability in thermal and flammability properties compared to bleached NCC. Bleached NCC showed notably lower thermo-mechanical properties in the nanocomposites blend.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Effects of Nanoclay on Mechanical and Dynamic Mechanical Properties of Bamboo/Kenaf Reinforced Epoxy Hybrid Composites

Siew Sand Chee et al.

Summary: The study investigates the mechanical and dynamic mechanical properties of hybrid natural fiber composites filled with nanoclay, with a focus on the effects of OMMT on enhancing the strength and storage modulus of the composites. The addition of OMMT results in improved mechanical properties and reduced voids and fiber pull-out in the composites.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of winding orientation on energy absorption and failure modes of filament wound kenaf/glass fibre reinforced epoxy hybrid composite tubes under intermediate-velocity impact (IVI) load

A. B. M. Supian et al.

Summary: This study investigated the behavior and strength of hybrid kenaf/glass fiber-reinforced epoxy tubes under axial intermediate-velocity impact loading, showing that different filament winding orientation parameters can enhance the energy absorber properties of the composite tubes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Polymer Science

Composites based on conductive polymer with carbon nanotubes in DMMP gas sensors - an overview

N. M. Nurazzi et al.

Summary: The importance of rapid response, high sensitivity, and stability in the development of chemical sensors for the detection of chemical warfare agents is highlighted by recent terrorist attacks. This review focuses on the development of various fabricated chemical sensors as potential sensing materials for the detection of DMMP in recent years. The research and application of carbon nanotubes in DMMP polymer sensors, as well as the crucial role of active materials in improving sensor performance, are emphasized.

POLIMERY (2021)

添加到收藏夹

Article Materials Science, Composites

Effects of oil palm and montmorillonite nanofillers on stiffness and interfacial adhesion of kenaf/epoxy hybrid nanocomposites

Helmi Hammami et al.

Summary: The dielectric properties of bio-hybrid composites reinforced with OPEFB, MMT, and OMMT nanoclays were evaluated in terms of molecular mobility, interfacial adhesion, and fragility near the glass transition temperature. The addition of nanofillers affected the relaxations and dielectric strength, with different types of fillers leading to different behaviors in the composites. The nanofillers were found to improve the distribution and bonding between KF fibers and epoxy resin in the matrix.

POLYMER COMPOSITES (2021)

添加到收藏夹

Review Polymer Science

A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications

N. M. Nurazzi et al.

Summary: This article discusses the use of natural fibers as an alternative to Kevlar in armor structures to enhance the ballistic performance of composite structures, as well as the potential advantages of natural fibers in protective equipment and high-durability products.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites

H. A. Aisyah et al.

Summary: The progressive application of natural fibres in polymer composites has alleviated environmental impacts. There is a growing interest in developing green materials using woven natural fibres for various applications. Woven materials have better mechanical properties and can be tailored to specific needs, making them promising materials for natural fibre polymer composites.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

The Effect of Stacking Sequence and Ply Orientation on the Mechanical Properties of Pineapple Leaf Fibre (PALF)/Carbon Hybrid Laminate Composites

Mohd Khairul Rabani Hashim et al.

Summary: The study investigated the effects of stacking sequence and ply orientation on the mechanical properties of PALF/carbon hybrid laminate composites. Different laminate configurations led to varied tensile and flexural performance, with the highest strengths and moduli observed in specific configurations. Failure analysis revealed that failure typically initiated at the weakest PALF layer, with various failure modes observed.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of the liquid natural rubber (LNR) on mechanical properties and microstructure of epoxy/silica/kenaf hybrid composite for potential automotive applications

C. N. Aiza Jaafar et al.

Summary: The study investigated the effects of rubber toughened epoxy/silica/kenaf composites on mechanical properties and microstructure, with the addition of liquid rubber enhancing the mechanical performance of the composite for potential automotive applications. SEM analysis showed that the addition of liquid rubber helped in lowering stress transfer and resulted in optimum mechanical properties, making the composite highly suitable for automotive applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Polymer Science

Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives

Abudukeremu Kadier et al.

Summary: Research has shown that using industrial waste as a substrate can improve cost competitiveness in BC production, revealing the potential high-efficiency value of industrial waste, and further optimization of culture conditions is needed to achieve large-scale production of BC from waste streams.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Effect of Chemically Treated Kenaf Fibre on Mechanical and Thermal Properties of PLA Composites Prepared through Fused Deposition Modeling (FDM)

Aida Haryati Jamadi et al.

Summary: The paper demonstrates the effectiveness of alkaline and silane treatments in improving the interface bonding of natural fibre-polymer matrix composites. Through mechanical testing, Scanning Electron Micrograph and Fourier Transform Infrared spectrometry, it was shown that 1.0% silane treatment exhibited better strength performance compared to other composites, suggesting potential high performance of kenaf fibre composites in industrial applications.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Composites

Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design

Ariff Farhan Mohd Nor et al.

Summary: This study utilized response surface methodology to model and optimize four independent parameters of kenaf/multi-walled carbon nanotubes (MWCNTs) hybrid composites, with the results indicating that kenaf fiber loading had the highest impact on the tensile properties.

APPLIED COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

Nur Izzah Nabilah Haris et al.

Summary: This study investigated the properties of basalt/woven glass fiber reinforced polymer hybrid polyester composites using FTIR, DMA, and TMA analyses. The results indicated that the hybrid composites exhibited higher mechanical and thermal properties compared to single reinforced composites.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone

Kanishka Jha et al.

Summary: In this study, biodegradable composites were fabricated with PCL matrix reinforced with pine cone powder and graphite powder, and tested for dimensional stability, biodegradability, and fracture energy. The results showed that composites with 15wt% pine cone powder exhibited higher dimensional stability, while the 30% pine cone powder composites showed increased fracture energy for crack initiation.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental study on mechanical properties of polypropylene nanocomposites reinforced with a hybrid graphene/PP-g-MA/kenaf fiber by response surface methodology

Jaber Mirzaei et al.

Summary: The mechanical properties of PP-based nanocomposites can be significantly enhanced by adding graphene nanosheets, kenaf fiber, and PP-g-MA, although the strength performance may be affected by the amount added.

JOURNAL OF ELASTOMERS AND PLASTICS (2021)

添加到收藏夹

Article Materials Science, Textiles

Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler

M. J. Suriani et al.

Summary: This study investigates the surface morphology, flammability, and tensile properties of sugar palm fiber (SPF) hybrid with polyester (PET) yarn-reinforced epoxy composite by adding magnesium hydroxide as a flame retardant. The results show that incorporating 35% SPF with magnesium hydroxide as a flame retardant reduces burning rate and increases tensile strength. However, at 50% SPF content, the lack of interfacial bonding between fibers and matrix decreases the tensile properties of the composite.

TEXTILE RESEARCH JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties

M. J. Suriani et al.

Summary: The study explores the potential of kenaf fiber in composite materials, showing that different ratios of kenaf content can impact the burning rate and tensile strength of the materials. The composite with 35% kenaf displayed better flame retardancy properties compared to other samples.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

M. J. Suriani et al.

Summary: Most boat fabrication companies now use 100% synthetic fiber-reinforced composite materials, but recent research shows a shift towards more cost-effective natural fibers. Hybridization is recommended as a solution to natural fiber's weaknesses and to reduce the use of environmentally unfriendly synthetic fibers.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

The Challenges and Future Perspective of Woven Kenaf Reinforcement in Thermoset Polymer Composites in Malaysia: A Review

Ching Hao Lee et al.

Summary: Woven kenaf thermoset polymer composites in Malaysia face challenges in terms of quality, public awareness, and government support. Despite the enhancement of thermoset composites by woven kenaf fiber, commercialization remains a hurdle for these materials in the Malaysian market.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

M. J. Suriani et al.

Summary: This study investigated the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites, revealing that the optimal fiber volume content was 20% for the best performance.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Physical Properties of Thermoplastic Starch Derived from Natural Resources and Its Blends: A Review

Z. N. Diyana et al.

Summary: The paper discusses the preparation and application of thermoplastic starch composites, exploring the related content of biopolymers and the potential advantages of these materials in replacing traditional plastics.

POLYMERS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Characterization of kenaf and glass fiber reinforced hybrid composites for underbody shield applications

Sandeep Tamrakar et al.

Summary: The study found that replacing glass fibers with natural fibers, such as kenaf, can make automotive parts more environmentally friendly. The mechanical properties of hybrid and all-kenaf composites were higher than those of all-glass composites under dry conditions, but all composites showed comparable properties after saturation. The mechanical properties of composites saturated at 70°C were severely affected, with the modulus decreasing by about 55% for the hybrid and all-kenaf composites.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Polymer Science

A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications

N. M. Nurazzi et al.

Summary: Hybrid natural fiber polymer composites have been the focus of recent research and innovation in the field of structural applications, aiming to improve mechanical properties by combining different materials, including natural fibers, synthetic fibers, and carbonaceous materials. These composite materials are manufactured from a variety of materials, such as rubber, elastomer, metal, ceramics, glasses, and plants, and have diverse shapes and applications in aerospace interiors, naval, civil building, industrial, and sporting goods sectors.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments

N. M. Nurazzi et al.

Summary: Chemical treatments significantly impact the thermal stability of natural fiber-reinforced polymer composites, influencing the structure, drying, and ignition temperatures. Thermo gravimetric analysis data serves as guidance in determining composite purity, composition, and stability temperatures, while also affecting the effectiveness of chemical treatments in bonding natural fibers with polymer matrix.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Effect of Nanofillers on Tribological Properties of Polymer Nanocomposites: A Review on Recent Development

Jia Xin Chan et al.

Summary: Polymer nanocomposites with enhanced performances have been gaining attention in the field of tribology, with recent research focusing on the influence of different types of nanofillers and their content and surface modification on the friction and wear resistance of the composites. The tribological properties of polymer nanocomposites are significantly affected by the type of nanofiller and its characteristics.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Development and Characterization of Polypropylene Waste from Personal Protective Equipment (PPE)-Derived Char-Filled Sugar Palm Starch Biocomposite Briquettes

M. M. Harussani et al.

Summary: This study focused on producing char briquettes from polypropylene powder derived from COVID-19 isolation gown waste, using sugar palm starch as a binder. The research showed that as the SPS loading increased, the compressive strength of the briquettes improved while the higher heating values decreased. The C-80/SPS-20 briquettes demonstrated excellent combustion characteristics and satisfactory mechanical strength, making them suitable for domestic and commercial uses.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Greener Pretreatment Approaches for the Valorisation of Natural Fibre Biomass into Bioproducts

Mohd Nor Faiz Norrrahim et al.

Summary: This review discusses the potential of lignocellulosic biomass in various applications, the importance of pretreatment processes, and the focus on greener alternatives to chemical pretreatment. The main physical and biological pretreatment processes are reviewed and recent advances in non-chemical pretreatment approaches for natural fibers are critically discussed with a focus on bioproducts conversion.

POLYMERS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent developments in sustainable arrowroot (Maranta arundinacea Linn) starch biopolymers, fibres, biopolymer composites and their potential industrial applications: A review

J. Tarique et al.

Summary: Raising environmental awareness has led researchers to explore environmentally friendly materials as alternatives for conventional ones. Arrowroot starch, with its high amylose content, is suitable for better film production. Blending starch with other polymers or reinforcing it with fibers can improve the properties of the materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Food Science & Technology

Development and Characterization of Fenugreek Protein-Based Edible Film

Neha Kumari et al.

Summary: The study found that the fenugreek protein concentrate film exhibited different physicochemical, mechanical, thermal, and surface morphological characteristics at different pH values, showing good thermal stability and structural properties. This film can be used as an edible packaging film.

FOODS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Effects of fiber loading on mechanical characterization of pineapple leaf and sisal fibers reinforced polyester composites for various applications

S. Sathees Kumar et al.

Summary: The study describes the mechanical properties of PALF and sisal reinforced polyester composites for the first time, showing that PALF has good tensile and flexural properties. The addition of natural fibers enhances the overall mechanical attributes of the composite material, which can be useful for industries, automotive, and construction fields.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Mechanical Performance and Applications of CNTs Reinforced Polymer Composites-A Review

N. M. Nurazzi et al.

Summary: Carbon nanotubes (CNTs) have been widely used in polymer composite materials due to their good thermal and electrical properties, low density, and high Young's modulus as suitable nanofillers. The unique nano-dimensions and strength of CNTs make them exceptional mechanical reinforcements for various applications, although there is still limited research on their mechanical performance in polymer composites. The potential uses of CNTs hybridized with polymer composites reinforced with natural fibers have been highlighted for future development.

NANOMATERIALS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical behavior of disposed fiberglass filled bamboo mat reinforced polyester composite

Ashley Lobo et al.

Summary: Natural plant fibers, especially bamboo fibers, have been increasingly used as reinforcement in composites for various applications. This study evaluated the mechanical properties of bamboo-fiberglass reinforced polyester resin panels by incorporating varying percentages of waste fiberglass. Results showed a significant improvement in mechanical strength with the increase of fiberglass content.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Conceptual Design of Glass/Renewable Natural Fibre-Reinforced Polymer Hybrid Composite Motorcycle Side Cover

M. A. F. A. Wahab et al.

Summary: This study developed a conceptual design of a glass/renewable natural fibre reinforced polymer hybrid composite motorcycle side cover through the application of Function Analysis Systems Techniques (FAST), competitive benchmarking criteria, and environmental requirements. Coir fibre was selected as the natural fibre, and polypropylene matrix was evaluated using Weighted Evaluation Matrix (WEM). The final design aimed to improve biodegradability and reduce environmental pollution.

JOURNAL OF RENEWABLE MATERIALS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites

J. P. Siregar et al.

Summary: The study on reinforced epoxy hybrid composites of sugar palm fiber and ramie fiber showed that the mechanical properties were enhanced. The hybrid composite with a higher tensile and flexural strength exhibited positive hybridization effects, contributing to the success in achieving a green composite.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Water barrier and mechanical properties of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly (lactic acid) (PLA) blend bionanocomposites

Asmawi Nazrin et al.

Summary: The study developed novel materials that have the potential to substitute traditional plastics, thus offering important implications for improving plastic waste disposal.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

A review on natural fiber reinforced hybrid composites: chemical treatments, manufacturing methods and potential applications

L. Prabhu et al.

Summary: Natural fiber reinforced composites are gaining popularity in various industries due to their lightweight, eco-friendly, and sustainable characteristics. Chemical treatments can enhance the bonding between natural fibers and matrices, ultimately improving the mechanical and thermal properties of the composites. Industries such as automobile, aircraft, building, musical, sports, and household applications are utilizing natural fiber reinforced composites for a wide range of purposes.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Treatments of natural fiber as reinforcement in polymer composites-a short review

N. M. Nurazzi et al.

Summary: Research has shown that natural fibers have great potential in the composite materials industry, but require proper treatment to enhance performance, and a balance between cost-effectiveness, environmental impacts, and desired performance is needed in design. However, natural fibers still face challenges such as incompatibility with polymer matrix and moisture absorption.

FUNCTIONAL COMPOSITES AND STRUCTURES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Production and characterization of bamboo and sisal fiber reinforced hybrid composite for interior automotive body application

Dawit Getu et al.

Summary: This study developed and characterized the performance of sisal and bamboo reinforced polyester hybrid composite with different fiber orientations, finding that the 0-degree fiber orientation exhibited higher tensile and compressive strength. The results suggest that this composite material has the potential to be used for automotive interior part applications.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Textiles

Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites

Farah Hanan et al.

JOURNAL OF NATURAL FIBERS (2020)

添加到收藏夹

Article Materials Science, Composites

Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites

Rosemere de Araujo Alves Lima et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Composites

Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties

R. A. Ilyas et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on mechanical characteristics of woven cotton/bamboo hybrid reinforced composite laminates

Karthik Aruchamy et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and characterization of cornhusk/sugar palm fiber reinforced Cornstarch-based hybrid composites

M. I. J. Ibrahim et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of barium sulphate on mechanical, DMA and thermal behaviour of woven aloevera/flax hybrid composites

M. Arulmurugan et al.

BULLETIN OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Textiles

Long-term Immersion in Water of Flax-glass Fibre Hybrid Composites: Effect of Stacking Sequence on the Mechanical and Damping Properties

Khouloud Cheour et al.

FIBERS AND POLYMERS (2020)

添加到收藏夹

Article Chemistry, Applied

Thermal, Biodegradability and Water Barrier Properties of Bio-Nanocomposites Based on Plasticised Sugar Palm Starch and Nanofibrillated Celluloses from Sugar Palm Fibres

R. A. Ilyas et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Influence of Water Absorption on the Low Velocity Falling Weight Impact Damage Behaviour of Flax/Glass Reinforced Vinyl Ester Hybrid Composites

Angeline Paturel et al.

MOLECULES (2020)

添加到收藏夹

Article Polymer Science

Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites

N. Mohd Nurazzi et al.

POLIMERY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Alkali and Silane Treatments towards Exemplary Mechanical Properties of Kenaf and Pineapple Leaf Fibre-reinforced Composites

Ng Lin Feng et al.

JOURNAL OF BIONIC ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites

N. Mohd Nurazzi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Polymer Science

Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites

M. D. Hazrol et al.

POLIMERY (2020)

添加到收藏夹

Article Chemistry, Analytical

Biopolymers and Biocomposites: Chemistry and Technology

R. A. Ilyas et al.

CURRENT ANALYTICAL CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Low Velocity Impact and Compression after Impact Properties on Gamma Irradiated Kevlar/Oil Palm Empty Fruit Bunch Hybrid Composites

Siti Madiha Muhammad Amir et al.

COATINGS (2020)

添加到收藏夹

Article Polymer Science

Characterization of Hybrid Oil Palm Empty Fruit Bunch/Woven Kenaf Fabric-Reinforced Epoxy Composites

Farah Hanan et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites

S. M. Sapuan et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of benzoyl treated sugar palm/glass fibre hybrid composites

Syafiqah Nur Azrie Safri et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Polymer Science

The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating

A. Rozilah et al.

POLYMERS (2020)

添加到收藏夹

Article Thermodynamics

Predicting thermal conductivity and mechanical property of bamboo fibers/polypropylene nonwovens reinforced composites based on regression analysis

Chunhong Wang et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Polymer Science

Alkali treated coir/pineapple leaf fibres reinforced PLA hybrid composites: Evaluation of mechanical, morphological, thermal and physical properties

R. Siakeng et al.

EXPRESS POLYMER LETTERS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Preparation and mechanical properties and banana fibres composite evaluation of polyvinyl alcohol

R. S. Rana et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Review Materials Science, Textiles

A review on synthesis and characterization of commercially available natural fibers: Part II

P. Madhu et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Article Materials Science, Textiles

The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface Characterization

M. R. Sanjay et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Sugar palm nanofibrillated cellulose (Arenga pinnata (Wurmb.) Merr): Effect of cycles on their yield, physic-chemical, morphological and thermal behavior

R. A. Ilyas et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis

El Hadi Saidane et al.

POLYMER TESTING (2019)

添加到收藏夹

Article Polymer Science

Hybrid and Nonhybrid Laminate Composites of Sugar Palm and Glass Fibre-Reinforced Polypropylene: Effect of Alkali and Sodium Bicarbonate Treatments

Isma'ila Mukhtar et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sugar palm (Arenga pinnate (Wurmb.) Merr) cellulosic fibre hierarchy: a comprehensive approach from macro to nano scale

Rushdan Ahmad Ilyas et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Chemistry, Physical

Void Content, Tensile, Vibration and Acoustic Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Hybrid Composites

Ahmad Safwan Ismail et al.

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Water absorption, thickness swelling and thermal properties of roselle/sugar palm fibre reinforced thermoplastic polyurethane hybrid composites

A. M. Radzi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physical and thermal properties of treated sugar palm/glass fibre reinforced thermoplastic polyurethane hybrid composites

A. Atiqah et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile, physical and morphological properties of oil palm empty fruit bunch/sugarcane bagasse fibre reinforced phenolic hybrid composites

Nor Azlina Ramlee et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Characterization of natural fiber obtained from different parts of date palm tree (Phoenix dactylifera L.)

Majed D. Alotaibi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on the characteristics of bamboo/jute reinforced hybrid epoxy polymer composites

Jafrey D. Daniel et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch

R. A. Ilyas et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review

Yashas Gowda Thyavihalli Girijappa et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Mechanics

Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites

Syafiqah Nur Azrie Safri et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Automated spray up process for Pineapple Leaf Fibre hybrid biocomposites

Mohd Hanafee Zin et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Agricultural Engineering

Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding

Asokan Pappu et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Investigation into mechanical, absorption and swelling behaviour of hemp/sisal fibre reinforced bioepoxy hybrid composites: Effects of stacking sequences

Senthil Muthu Kumar Thiagamani et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physical and mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

Atiqah Afzaluddin et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Polymer Science

Degradation and physical properties of sugar palm starch/sugar palm nanofibrillated cellulose bionanocomposite

M. S. N. Atikah et al.

POLIMERY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Mapping thermal conductivity across bamboo cell walls with scanning thermal microscopy

Darshil U. Shah et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Construction & Building Technology

Evaluation of mechanical and free vibration properties of the pineapple leaf fibre reinforced polyester composites

K. Senthilkumar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Chemistry, Organic

The Preparation Methods and Processing of Natural Fibre Bio-polymer Composites

R. A. Ilyas et al.

CURRENT ORGANIC SYNTHESIS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of hybridization on properties of hemp-carbon fibre-reinforced hybrid polymer composites using experimental and finite element analysis

M. Ramesh et al.

WORLD JOURNAL OF ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Dynamic mechanical analysis of banana, pineapple leaf and glass fibre reinforced hybrid polyester composites

P. Venkata Deepthi et al.

MATERIALS TODAY-PROCEEDINGS (2019)

添加到收藏夹

Article Chemistry, Applied

Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)

R. A. Ilyas et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Mechanics

Thermal properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites

A. Atiqah et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Effect of basalt fibre hybridisation and sizing removal on mechanical and thermal properties of hemp fibre reinforced HDPE composites

Fabrizio Sarasini et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Thermal, physical properties and flammability of silane treated kenaf/pineapple leaf fibres phenolic hybrid composites

M. Asim et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites

M. Aslan et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Investigation into Mode II interlaminar fracture toughness characteristics of flax/basalt reinforced vinyl ester hybrid composites

F. A. Almansour et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Review Construction & Building Technology

Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review

K. Senthilkumar et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites

M. A. A. Ahmad et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of sugar palm yarn/glass fibre reinforced unsaturated polyester hybrid composites

N. Mohd Nurazzi et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Article Chemistry, Applied

Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites

R. A. Ilyas et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

The static and dynamic mechanical properties of kenaf/glass fibre reinforced hybrid composites

Sivakumar Dhar Malingam et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Proceedings Paper Materials Science, Paper & Wood

Sugar palm nanocrystalline cellulose reinforced sugar palm starch composite: Degradation and water-barrier properties

R. A. Ilyas et al.

WOOD AND BIOFIBER INTERNATIONAL CONFERENCE (WOBIC 2017) (2018)

添加到收藏夹

Article Materials Science, Composites

Characterization of microwave-treated oil palm empty fruit bunch/glass fibre/polypropylene composites

M. R. Islam et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)

添加到收藏夹

Article Chemistry, Applied

Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties

Ahmed Edhirej et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites

Ridhwan Jumaidin et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Materials Science, Composites

Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet

Ajit Dhanawade et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Plant fibre based bio-composites: Sustainable and renewable green materials

M. Ramesh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Materials Science, Textiles

Studies on Mechanical and Morphological Characterization of Developed Jute/Hemp/Flax Reinforced Hybrid Composites for Structural Applications

Vijay Chaudhary et al.

Journal of Natural Fibers (2017)

添加到收藏夹

Article Materials Science, Paper & Wood

Effect of Delignification on the Physical, Thermal, Chemical, and Structural Properties of Sugar Palm Fibre

R. A. Ilyas et al.

BIORESOURCES (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental Investigation on Jute/Carbon Fibre reinforced Epoxy based Hybrid Composites

M. Venkata Ramana et al.

MATERIALS TODAY-PROCEEDINGS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comparative study of composite structures reinforced with carbon, glass or natural fibers

S. Brischetto

MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Salt-fog spray aging of jute-basalt reinforced hybrid structures: Flexural and low velocity impact response

V. Fiore et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process

V. R. Arun Prakash et al.

DEFENCE TECHNOLOGY (2017)

添加到收藏夹

Article Food Science & Technology

Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging

M. L. Sanyang et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2016)

添加到收藏夹

Article Polymer Science

Banana fiber reinforced low-density polyethylene composites: effect of chemical treatment and compatibilizer addition

Nirupama Prasad et al.

IRANIAN POLYMER JOURNAL (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent developments in sugar palm (Arenga pinnata) based biocomposites and their potential industrial applications: A review

M. L. Sanyang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

The behavior of delaminations in composite materials experimental results

A. S. Chermoshentseva et al.

INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND NEW TECHNOLOGIES IN MODERN MATERIALS SCIENCE 2015 (2016)

添加到收藏夹

Proceedings Paper Materials Science, Composites

Modeling of Falling Weight Impact Behavior of Hybrid Basalt/Flax Vinylester Composites

Simonetta Boria et al.

2ND INTERNATIONAL SYMPOSIUM ON DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS, (DRAF 2016) (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

A. Alavudeen et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Physico-chemical and Thermal Properties of Starch Derived from Sugar Palm Tree (Arenga pinnata)

J. Sahari et al.

ASIAN JOURNAL OF CHEMISTRY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications

A. Atiqah et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Review Engineering, Multidisciplinary

Flax fibre and its composites - A review

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Fabrication, process simulation and testing of a thick CFRP component using the RTM process

E. Poodts et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Composites

Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites

Hazizan Md Akil et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Textiles

Bio-composites: Development and Mechanical Characterization of Banana/Sisal Fibre Reinforced Poly Lactic Acid (PLA) Hybrid Composites

B. Asaithambi et al.

FIBERS AND POLYMERS (2014)

添加到收藏夹

Article Materials Science, Composites

Evaluation of jute/glass hybrid composite sandwich: Water resistance, impact properties and life cycle assessment

Surya D. Pandita et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Article Materials Science, Composites

Mechanical performance of woven kenaf-Kevlar hybrid composites

R. Yahaya et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Progress Report on Natural Fiber Reinforced Composites

Omar Faruk et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Extraction and preparation of bamboo fibre-reinforced composites

Parnia Zakikhani et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite

V. S. Srinivasan et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Review Chemistry, Applied

Sugar palm (Arenga pinnata): Its fibres, polymers and composites

M. R. Ishak et al.

CARBOHYDRATE POLYMERS (2013)

添加到收藏夹

Article Polymer Science

Mechanical properties of hybrid glass/sugar palm fibre reinforced unsaturated polyester composites

S. M. Sapuan et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2013)

添加到收藏夹

Article Forestry

Kenaf Bast Fiber Bundle–Reinforced Unsaturated Polyester Composites. IV: Effects of Fiber Loadings and Aspect Ratios on Composite Tensile Properties

Yicheng Du et al.

FOREST PRODUCTS JOURNAL (2013)

添加到收藏夹

Article Engineering, Manufacturing

Banana and Abaca Fiber-Reinforced Plastic Composites Obtained by Rotational Molding Process

Z. Ortega et al.

MATERIALS AND MANUFACTURING PROCESSES (2013)

添加到收藏夹

Review Engineering, Manufacturing

Critical review of recent publications on use of natural composites in infrastructure

David B. Dittenber et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Critical factors on manufacturing processes of natural fibre composites

Mei-po Ho et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Article Thermodynamics

Characterization of sugar palm (Arenga pinnata) fibres

M. R. Ishak et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and Characterization of Ramie-Glass Fiber Reinforced Polymer Matrix Hybrid Composites

Daiane Romanzini et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2012)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effect of water absorption on the mechanical properties of n-SiC filled recycled cellulose fibre reinforced epoxy eco-nanocomposites

H. Alamri et al.

POLYMER TESTING (2012)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites

H. Alamri et al.

POLYMER TESTING (2012)

添加到收藏夹

Review Polymer Science

Biocomposites reinforced with natural fibers: 2000-2010

Omar Faruk et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Engineering, Manufacturing

Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites

Lin Xin Zhong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Low velocity impact and compression after impact tests on thin carbon/epoxy laminates

Daniele Ghelli et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Article Materials Science, Composites

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/epoxy composites

L. Osorio et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)

添加到收藏夹

Article Materials Science, Characterization & Testing

Optimization of the Mechanical Properties of Abaca Fibre-Reinforced High Impact Polystyrene (HIPS) Composites Using Box-Behnken Design of Experiments

E. H. Agung et al.

POLYMERS & POLYMER COMPOSITES (2011)

添加到收藏夹

Article Agricultural Engineering

Biobased composites from glyoxal-phenolic resins and sisal fibers

Elaine C. Ramires et al.

BIORESOURCE TECHNOLOGY (2010)

添加到收藏夹

Article Agricultural Engineering

Morphology and properties of hybrid composites based on polypropylene/polylactic acid blend and bamboo fiber

Zhang Ying-Chen et al.

BIORESOURCE TECHNOLOGY (2010)

添加到收藏夹

Article Chemistry, Applied

Study mechanical, swelling and dielectric properties of prehydrolysed banana fiber - Waste polyurethane foam composites

Magda G. El-Meligy et al.

CARBOHYDRATE POLYMERS (2010)

添加到收藏夹

Article Engineering, Manufacturing

Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites

Tao Yu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Materials Science, Composites

Polypropylene composites with enzyme modified abaca fibre

Andrzej K. Bledzki et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Construction & Building Technology

Effect of accelerated carbonation on cementitious roofing tiles reinforced with lignocellulosic fibre

G. H. D. Tonoli et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

添加到收藏夹

Article Polymer Science

Chemical, morphological and mechanical analysis of sisal fiber-reinforced recycled high-density polyethylene composites

S. L. Favaro et al.

EXPRESS POLYMER LETTERS (2010)

添加到收藏夹

Article Polymer Science

Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/kenaf composite

N. N. Bonnia et al.

EXPRESS POLYMER LETTERS (2010)

添加到收藏夹

Article Agricultural Engineering

Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

Jackson D. Megiatto et al.

INDUSTRIAL CROPS AND PRODUCTS (2010)

添加到收藏夹

Article Green & Sustainable Science & Technology

Ecodesign of automotive components making use of natural jute fiber composites

C. Alves et al.

JOURNAL OF CLEANER PRODUCTION (2010)

添加到收藏夹

Article Materials Science, Composites

The Mechanical Properties of γ-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester Composites

Kutlay Sever et al.

JOURNAL OF COMPOSITE MATERIALS (2010)

添加到收藏夹

Article Engineering, Environmental

Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties

P. Noorunnisa Khanam et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)

添加到收藏夹

Article Materials Science, Composites

Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate

Abdallah Mir et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

Article Materials Science, Composites

The Influence of Oligomeric Siloxane Concentration on the Mechanical Behaviors of Alkalized Jute/Modified Epoxy Composites

Mehmet Sarikanat

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

Article Materials Science, Composites

Preparation and mechanical characterization of jute reinforced polypropylene/natural rubber composite

Haydar U. Zaman et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)

添加到收藏夹

Article Chemistry, Applied

Effects of Alkali and Silane Treatment on the Mechanical Properties of Jute-Fiber-Reinforced Recycled Polypropylene Composites

Xinxin Wang et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites

I. O. Bakare et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam

M. M. Davoodi et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Materials Science, Composites

Influence of Alkali-Treated Fibers on the Mechanical Properties and Machinability of Roselle and Sisal Fiber Hybrid Polyester Composite

A. Athijayamani et al.

POLYMER COMPOSITES (2010)

添加到收藏夹

Article Engineering, Mechanical

FLEXURAL PROPERTIES OF ALKALINE TREATED SUGAR PALM FIBRE REINFORCED EPOXY COMPOSITES

D. Bachtiar et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Composites

Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite

U. K. Dwivedi et al.

APPLIED COMPOSITE MATERIALS (2009)

添加到收藏夹

Article Construction & Building Technology

Cracking mechanisms in durable sisal fiber reinforced cement composites

Flavio de Andrade Silva et al.

CEMENT & CONCRETE COMPOSITES (2009)

添加到收藏夹

Article Construction & Building Technology

Fracture and fatigue of natural fiber-reinforced cementitious composites

H. Savastano et al.

CEMENT & CONCRETE COMPOSITES (2009)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers

Supranee Sangthong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Manufacturing

Chemical modification of flax reinforced polypropylene composites

Maya Jacob John et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties and flammability of sisal/PP composites: Effect of flame retardant type and content

Nitinat Suppakarn et al.

COMPOSITES PART B-ENGINEERING (2009)

添加到收藏夹

Article Materials Science, Composites

The effect of chelator and white rot fungi treatments on long hemp fibre-reinforced composites

Yan Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Composites

Determination of interfacial shear strength of white rot fungi treated hemp fibre reinforced polypropylene

Yan Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Applied

Impact Load Behaviour of Resin Transfer Moulding (RTM) Hemp Fibre Composite Laminates

C. Scarponi et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2009)

添加到收藏夹

Article Chemistry, Applied

Static and Dynamic Properties of Thermoplastic Matrix/Natural Fiber Composites

Luca Di Landro et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2009)

添加到收藏夹

Article Chemistry, Applied

Improving the Interface Strength in Flax Fibre Poly(lactic) Acid Composites

Miro Duhovic et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2009)

添加到收藏夹

Article Chemistry, Applied

Effect of Fibre Architecture on the Failing Weight Impact Properties of Hemp/Epoxy Composites

C. Santulli et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2009)

添加到收藏夹

Review Engineering, Electrical & Electronic

Studies of dielectric relaxation in natural fiber-polymer composites

I. Ben Amor et al.

JOURNAL OF ELECTROSTATICS (2009)

添加到收藏夹

Article Materials Science, Textiles

Preliminary Investigation on Bulletproof Panels Made from Ramie Fiber Reinforced Composites for NIJ Level II, IIA, and IV

Eko Marsyahyo et al.

JOURNAL OF INDUSTRIAL TEXTILES (2009)

添加到收藏夹

Article Engineering, Industrial

Influence of MA-g-PP on abrasive wear behaviour of chopped sisal fibre reinforced polypropylene composites

U. K. Dwivedi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Composites

Polypropylene-Bamboo/Glass Fiber Hybrid Composites: Fabrication and Analysis of Mechanical, Morphological, Thermal, and Dynamic Mechanical Behavior

Sushanta K. Samal et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)

添加到收藏夹

Article Materials Science, Composites

Recent Development in Natural Fiber Reinforced Polypropylene Composites

Ramakrishna Malkapuram et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties and performances of various hybrid glass/natural fibre composites for curved pipes

G. Cicala et al.

MATERIALS & DESIGN (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites

Sanjay K. Nayak et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite

A. Athijayamani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

添加到收藏夹

Article Polymer Science

Rigidity analysis of polypropylene/vegetal fibre composites after recycling

Alain Bourmaud et al.

POLYMER DEGRADATION AND STABILITY (2009)

添加到收藏夹

Article Mechanics

Application of natural fiber reinforced composites to trenchless rehabilitation of underground pipes

Ha Na Yu et al.

COMPOSITE STRUCTURES (2008)

添加到收藏夹

Article Engineering, Manufacturing

Reinforcement of plasticized wheat gluten with natural fibers: From mechanical improvement to deplasticizing effect

T. Kunanopparat et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

添加到收藏夹

Article Engineering, Manufacturing

The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites

Q. Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

添加到收藏夹

Article Materials Science, Composites

Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers

Mahmoodul Haq et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Materials Science, Composites

Hemp fibre reinforced composites using chelator and enzyme treatments

Yan Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Materials Science, Composites

Fatigue of sisal fibre reinforced composites: Constant-life diagrams and hysteresis loop capture

Arnold N. Towo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Environmental Sciences

WOOD-BASED EPOXY RESINS AND THE RAMIE FIBER REINFORCED COMPOSITES

Hajime Kishi et al.

ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL (2008)

添加到收藏夹

Article Polymer Science

Sisal cellulose acetates obtained from heterogeneous reactions

M. Peres de Paula et al.

EXPRESS POLYMER LETTERS (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical properties of silanized jute-polypropylene composites

C. K. Hong et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2008)

添加到收藏夹

Article Engineering, Environmental

Cotton Fibre-reinforced Thermosets Versus Ramie Composites: A Comparative Study using Petrochemical- and Agro-based Resins

Joerg Muessig

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative study of polypropylene composites reinforced with oil palm empty fruit bunch fiber and oil palm derived cellulose

M. Khalid et al.

MATERIALS & DESIGN (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials

Nilza G. Justiz-Smith et al.

MATERIALS CHARACTERIZATION (2008)

添加到收藏夹

Article Polymer Science

Biodegradable Composites: Ramie Fibre Reinforced PLLA-PCL Composite Prepared by in Situ Polymerization Process

Hong Xu et al.

POLYMER BULLETIN (2008)

添加到收藏夹

Article Polymer Science

Sisal chemically modified with lignins: Correlation between fibers and phenolic composites properties

Jackson D. Megiatto et al.

POLYMER DEGRADATION AND STABILITY (2008)

添加到收藏夹

Article Materials Science, Textiles

Studies of Sisal Fiber-Containing Composites

A. Meddahi et al.

JOURNAL OF NATURAL FIBERS (2008)

添加到收藏夹

Article Polymer Science

Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites

A. K. Bledzki et al.

EXPRESS POLYMER LETTERS (2007)

添加到收藏夹

Article Polymer Science

Mechanical properties of sisal fibre reinforced urea-formaldehyde resin composites

J. B. Zhong et al.

EXPRESS POLYMER LETTERS (2007)

添加到收藏夹

Article Agricultural Engineering

Conventional agro-composites from chemically modified fibres

H. P. S. Abdul Khalil et al.

INDUSTRIAL CROPS AND PRODUCTS (2007)

添加到收藏夹

Article Polymer Science

Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites

Jarnal Mirbagheri et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical and thermal properties of waste water bamboo husk fiber reinforced epoxy composites

Yeng-Fong Shih

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Mechanics

Extraction and tensile properties of natural fibers: Vakka, date and bamboo

K. Murali Mohan Rao et al.

COMPOSITE STRUCTURES (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastic properties, notched strength and fracture criterion in untreated woven jute-glass fabric reinforced polyester hybrid composites

K. Sabeel Ahmed et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Manufacturing

Creep and dynamic mechanical behavior of PP-jute composites: Effect of the interfacial adhesion

Betiana A. Acha et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Materials Science, Composites

Agro-hybrid composite: The effects on mechanical and physical properties of oil palm fiber (EFB)/glass hybrid reinforced polyester composites

H. P. S. Abdul Khalil et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)

添加到收藏夹

Article Engineering, Manufacturing

Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions

M. Zampaloni et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Materials Science, Textiles

Green composites. I. Physical properties of ramie fibers for environment-friendly green composites

Sunghyun Nam et al.

FIBERS AND POLYMERS (2006)

添加到收藏夹

Article Polymer Science

Performance of pineapple leaf fiber-natural rubber composites: The effect of fiber surface treatments

Natinee Lopattananon et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

添加到收藏夹

Article Materials Science, Composites

Functionalization, compatibilization and properties of polypropylene composites with Hemp fibres

Mariano Pracella et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of-volume fraction of ramie cloth on physical and mechanical properties of ramie cloth/LTP resin composite

Lei Wen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2006)

添加到收藏夹

Article Materials Science, Characterization & Testing

Relationship between water absorption and dielectric behaviour of natural fibre composite materials

AN Fraga et al.

POLYMER TESTING (2006)

添加到收藏夹

Article Polymer Science

Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres

LB Manfredi et al.

POLYMER DEGRADATION AND STABILITY (2006)

添加到收藏夹

Article Thermodynamics

Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites:: Effect of treatments

A Arbelaiz et al.

THERMOCHIMICA ACTA (2006)

添加到收藏夹

Article Engineering, Manufacturing

Structural biocomposites from flax - Part I: Effect of bio-technical fibre modification on composite properties

T Stuart et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Engineering, Manufacturing

The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/polyester composites

Laly A. Pothan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Engineering, Manufacturing

Short palm tree fibers - Thermoset matrices composites

Hamid Kaddami et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Engineering, Manufacturing

Improvement of plant based natural fibers for toughening green composites - Effect of load application during mercerization of ramie fibers

Koichi Goda et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical properties of short-flax-fibre reinforced compounds

Harriette L. Bos et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Engineering, Manufacturing

Influence of chemical treatments on surface properties and adhesion of flax fibre-polyester resin

Christophe Baley et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

添加到收藏夹

Article Materials Science, Composites

Fully biodegradable natural fiber composites from renewable resources: All-plant fiber composites

MQ Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Article Materials Science, Characterization & Testing

Press forming of short natural fiber-reinforced biodegradable resin: Effects of fiber volume and length on flexural properties

S Shibata et al.

POLYMER TESTING (2005)

添加到收藏夹

Article Materials Science, Composites

Characterization of stearic acid modified soy protein isolate resin and ramie fiber reinforced 'green' composites

P Lodha et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2005)

添加到收藏夹

Article Engineering, Manufacturing

Effect of sisal fibre orientation on electrical properties of sisal fibre reinforced epoxy composites

N Chand et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization

A Arbelaiz et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

添加到收藏夹

Article Materials Science, Composites

Composite micromechanics of hemp fibres and epoxy resin microdroplets

SJ Eichhorn et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Polymer Science

Biodegradation of aliphatic polyester composites reinforced by abaca fiber

N Teramoto et al.

POLYMER DEGRADATION AND STABILITY (2004)

添加到收藏夹

Article Materials Science, Composites

The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 - polyester resin matrix

SH Aziz et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Composites

Effect of the defect concentration on the impact fatigue endurance of untreated and alkali treated Jute-vinylester composites under normal and liquid nitrogen atmosphere

BK Sarkar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Engineering, Manufacturing

Are natural fiber composites environmentally superior to glass fiber reinforced composites?

SV Joshi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

添加到收藏夹

Article Materials Science, Composites

Natural fibres: can they replace glass in fibre reinforced plastics?

P Wambua et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Composites

Influence of processing and chemical treatment of flax fibres on their composites

I Van de Weyenberg et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Composites

Kenaf reinforced biodegradable composite

T Nishino et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Environmental effects on bamboo-glass/polypropylene hybrid composites

MM Thwe et al.

JOURNAL OF MATERIALS SCIENCE (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermal properties of pineapple leaf fiber reinforced composites

R Mangal et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Mechanics

Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites

K Van de Velde et al.

COMPOSITE STRUCTURES (2003)

添加到收藏夹

Article Materials Science, Composites

Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites

MM Thwe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Polymer Science

Thermal degradation of flax: The determination of kinetic parameters with thermogravimetric analysis

K Van de Velde et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

添加到收藏夹

Article Engineering, Manufacturing

Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites

MM Thwe et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)

添加到收藏夹

Article Engineering, Manufacturing

Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibres

D Ray et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)

添加到收藏夹

Article Materials Science, Composites

Environmental effects on the degradation behaviour of sisal fibre reinforced polypropylene composites

PV Joseph et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Composites

A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres

S Joseph et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Characterization & Testing

Post-impact damage characterisation on natural fibre reinforced composites using acoustic emission

C Santulli

NDT & E INTERNATIONAL (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stress relaxation behaviour in oil palm fibres

MS Sreekala et al.

MATERIALS LETTERS (2001)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review: Current international research into cellulosic fibres and composites

SJ Eichhorn et al.

JOURNAL OF MATERIALS SCIENCE (2001)

添加到收藏夹

Article Polymer Science

The effect of oil extraction of the oil palm empty fruit bunch on the mechanical properties of polypropylene-oil palm empty fruit bunch-glass fibre hybrid composites

HD Rozman et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2001)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of natural fibre mat reinforced thermoplastic

K Oksman

APPLIED COMPOSITE MATERIALS (2000)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene

SK Garkhail et al.

APPLIED COMPOSITE MATERIALS (2000)

添加到收藏夹

Article Materials Science, Composites

The durability of jute fibre-reinforced phenolic composites

B Singh et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

Article Materials Science, Composites

Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites

AK Mohanty et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

Article Engineering, Manufacturing

The use of unretted hemp fibre in composite manufacture

DG Hepworth et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.