相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The Making of Mike Kelley's The Wages of Sin's Exhibition Copy: Replication as a Means of Preservation
Eleonora E. Nagy
STUDIES IN CONSERVATION (2022)
3D printing filament as a second life of waste plastics-a review
Katarzyna Mikula et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
The Method of Decomposition of Architectural Objects for the preparation of 3D Virtual Models and Replication
Jerzy Montusiewicz et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2021)
Fused filament fabrication of polymer materials: A review of interlayer bond
Xia Gao et al.
ADDITIVE MANUFACTURING (2021)
Anisotropic microstructure dependent mechanical behavior of 3D-printed basalt fiber-reinforced thermoplastic composites
Siwon Yu et al.
COMPOSITES PART B-ENGINEERING (2021)
3D-printed cryomilled poly(ε-caprolactone)/graphene composite scaffolds for bone tissue regeneration
Daniela Dias et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)
Photogrammetry and 3D Printing for Marble Statues Replicas: Critical Issues and Assessment
Valentina Bonora et al.
SUSTAINABILITY (2021)
Development and testing of material extrusion additive manufactured polymer-textile composites
Giselle Hsiang Loh et al.
FASHION AND TEXTILES (2021)
Mechanical and thermal study of 3D printing composite filaments from wind turbine waste
Amirmohammad Rahimizadeh et al.
POLYMER COMPOSITES (2021)
UV-Assisted 3D Printing of Polymer Composites from Thermally and Mechanically Recycled Carbon Fibers
Andrea Mantelli et al.
POLYMERS (2021)
3D Printing of PDMS-Like Polymer Nanocomposites with Enhanced Thermal Conductivity: Boron Nitride Based Photocuring System
Lorenzo Pezzana et al.
NANOMATERIALS (2021)
Sustainable Materials for Fused Deposition Modeling 3D Printing Applications
Jennifer P. Rett et al.
ADVANCED ENGINEERING MATERIALS (2021)
Molds with Advanced Materials for Carbon Fiber Manufacturing with 3D Printing Technology
Patrich Ferretti et al.
POLYMERS (2021)
Waste office paper filled polylactic acid composite filaments for 3D printing
Yubo Tao et al.
COMPOSITES PART B-ENGINEERING (2021)
Poly(Lactic Acid)/Graphite Nanoplatelet Nanocomposite Filaments for Ligament Scaffolds
Magda Silva et al.
NANOMATERIALS (2021)
A review on wood powders in 3D printing: processes, properties and potential applications
Atanu Kumar Das et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Fused deposition modelling: Current status, methodology, applications and future prospects
Alba Cano-Vicent et al.
ADDITIVE MANUFACTURING (2021)
3D printed composites with uniform distribution of Fe3O4 nanoparticles and magnetic shape anisotropy
Adrianna Kania et al.
ADDITIVE MANUFACTURING (2021)
3D Printing Technology for Biomedical Practice: A Review
Pankaj Kumar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Green recycling of aluminum plastic packaging waste by solid-state shear milling and 3D printing for thermal conductive composites
Baojie Wei et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2021)
Fused deposition modeling based polymeric materials and their performance: A review
Vigneshwaran Shanmugam et al.
POLYMER COMPOSITES (2021)
Mechanical and Physicochemical Properties of 3D-Printed Agave Fibers/Poly(lactic) Acid Biocomposites
Valeria Figueroa-Velarde et al.
MATERIALS (2021)
3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review
Salman Pervaiz et al.
MATERIALS (2021)
Design and Development of Cellulosic Bionanocomposites from Forestry Waste Residues for 3D Printing Applications
Maya Jacob John et al.
MATERIALS (2021)
Strain Rate Sensitivity of Polycarbonate and Thermoplastic Polyurethane for Various 3D Printing Temperatures and Layer Heights
Nectarios Vidakis et al.
POLYMERS (2021)
Design, Materials, and Extrusion-Based Additive Manufacturing in Circular Economy Contexts: From Waste to New Products
Alessia Romani et al.
SUSTAINABILITY (2021)
Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG's Mechanical Properties to FDM Printing Process Parameters
Mohammed Algarni et al.
CRYSTALS (2021)
Surface Characterization of Fracture in Polylactic Acid vs. PLA plus Particle (Cu, Al, Graphene) Insertions by 3D Fused Deposition Modeling Technology
Brandusa Ghiban et al.
COATINGS (2021)
Metallization of Thermoplastic Polymers and Composites 3D Printed by Fused Filament Fabrication
Alessia Romani et al.
TECHNOLOGIES (2021)
Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing
Nishata Royan Rajendran Royan et al.
POLYMERS (2021)
A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters
Ruben Bayu Kristiawan et al.
OPEN ENGINEERING (2021)
3D printing in the battle against COVID-19
Ayca Aydin et al.
EMERGENT MATERIALS (2021)
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review
Narongkorn Krajangsawasdi et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
Fused deposition modelling: a review
Swapnil Vyavahare et al.
RAPID PROTOTYPING JOURNAL (2020)
Effect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
Christian Mauricio Cobos et al.
RAPID PROTOTYPING JOURNAL (2020)
Current status and future directions of fused filament fabrication
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships
Ali Reza Zanjanijam et al.
POLYMERS (2020)
3D Printing of Polymer Waste for Improving People's Awareness about Marine Litter
Francesca Ferrari et al.
POLYMERS (2020)
Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods
Jingjing Jing et al.
CHEMICAL ENGINEERING JOURNAL (2020)
On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers
Nectarios Vidakis et al.
POLYMERS (2020)
Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing
Madison Bardot et al.
NANOMATERIALS (2020)
Design of robotic and additive manufacturing for cultural heritage
F. Formati et al.
INTERNATIONAL CONFERENCE FLORENCE HERI-TECH: THE FUTURE OF HERITAGE SCIENCE AND TECHNOLOGIES (2020)
From materials to devices using fused deposition modeling: A state-of-art review
Pengfei Zhang et al.
NANOTECHNOLOGY REVIEWS (2020)
A critical review on the fused deposition modeling of thermoplastic polymer composites
Pavan Kumar Penumakala et al.
COMPOSITES PART B-ENGINEERING (2020)
Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems
S. C. Daminabo et al.
MATERIALS TODAY CHEMISTRY (2020)
Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
Martin Spoerk et al.
POLYMER COMPOSITES (2019)
Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling
Carola Esposito Corcione et al.
CERAMICS INTERNATIONAL (2019)
Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM)
Delphine Depuydt et al.
POLYMER COMPOSITES (2019)
Single step 3D printing of bioinspired structures via metal reinforced thermoplastic and highly stretchable elastomer
Armita Hamidi et al.
COMPOSITE STRUCTURES (2019)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
A numerical study of the effect of viscoelastic stresses in fused filament fabrication
Huanxiong Xia et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review
Hugo I. Medellin-Castillo et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2019)
Flexible, transparent, sub-100 μm microfluidic channels with fused deposition modeling 3D-printed thermoplastic polyurethane
Matt D. Nelson et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling
Sofiane Guessasma et al.
POLYMERS (2019)
3D printed antibacterial silver nanowire/polylactide nanocomposites
Ipek Bayraktar et al.
COMPOSITES PART B-ENGINEERING (2019)
3D printing of high density polyethylene by fused filament fabrication
Carl G. Schirmeister et al.
ADDITIVE MANUFACTURING (2019)
Highly loaded fiber filled polymers for material extrusion: A review of current understanding
Jacob J. Fallon et al.
ADDITIVE MANUFACTURING (2019)
Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing
Piotr Olesik et al.
MATERIALS (2019)
High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing
Ilenia Farina et al.
MATERIALS (2019)
Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling
Marie-Joo Le Guen et al.
FRONTIERS IN CHEMISTRY (2019)
3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration
Xibao Chen et al.
BIOMEDICAL MATERIALS (2019)
From souvenirs to 3D printed souvenirs. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs
Constantia Anastasiadou et al.
TOURISM MANAGEMENT (2019)
The Study on Polypropylene Applied in Fused Deposition Modeling
Mu Dong et al.
PROCEEDINGS OF PPS-34: THE 34TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY - CONFERENCE PAPERS (2019)
Antimicrobial modified hydroxyapatite composite dental bite by stereolithography
Pooyan Makvandi et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
Fused Deposition Modeling (FDM): An innovative technique aimed at reusing Lecce stone waste for industrial design and building applications
Carola Esposito Corcione et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding
Hongjie Bi et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
One-step solvent-free process for the fabrication of high loaded PLA/HA composite filament for 3D printing
Carola Esposito Corcione et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices
Bilal Khatri et al.
POLYMERS (2018)
Surface tailoring and design-driven prototyping of fabrics with 3D-printing: An all-cellulose approach
Tiia-Maria Tenhunen et al.
MATERIALS & DESIGN (2018)
Technical note: The use of 3D printing in dental anthropology collections
Luca Fiorenza et al.
AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY (2018)
Investigation of ABS-rice straw composite feedstock filament for FDM
Mohammed Ali Osman et al.
RAPID PROTOTYPING JOURNAL (2018)
A Feasibility Study of Processing Polydimethylsiloxane-Sodium Carboxymethylcellulose Composites by a Low-Cost Fused Deposition Modeling 3D Printer
Paola Calcagnile et al.
MATERIALS (2018)
Cork-PLA composite filaments for fused deposition modelling
Fugen Daver et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Fabrication of ABS/Graphene Oxide Composite Filament for Fused Filament Fabrication (FFF) 3D Printing
C. Aumnate et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Effect of wood content in FDM filament on properties of 3D printed parts
Mirko Kariz et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Fused filament fabrication of fiber-reinforced polymers: A review
Bastian Brenken et al.
ADDITIVE MANUFACTURING (2018)
An investigation into 3D printing of fibre reinforced thermoplastic composites
L. G. Blok et al.
ADDITIVE MANUFACTURING (2018)
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Helge Klippstein et al.
ADVANCED ENGINEERING MATERIALS (2018)
Digital Fabrication Techniques for Cultural Heritage: A Survey
R. Scopigno et al.
COMPUTER GRAPHICS FORUM (2017)
A surface quality improvement apparatus for ABS parts fabricated by additive manufacturing
Chil-Chyuan Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Lignin nanoparticles by ultrasonication and their incorporation in waterborne polymer nanocomposites
Maria Nelly Garcia Gonzalez et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
3D printing: State of the art and future perspectives
Caterina Balletti et al.
JOURNAL OF CULTURAL HERITAGE (2017)
3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
Carola Esposito Corcione et al.
JOURNAL OF POLYMER ENGINEERING (2017)
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Thi Nga Tran et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
S. Berretta et al.
POLYMER TESTING (2017)
Conceptualizing the circular economy: An analysis of 114 definitions
Julian Kirchherr et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Characterization for elastic constants of fused deposition modelling-fabricated materials based on the virtual fields method and digital image correlation
Quankun Cao et al.
ACTA MECHANICA SINICA (2017)
Fused Deposition Modelling of Natural Fibre/Polylactic Acid Composites
David Stoof et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Electrically conductive filament for 3D-printed circuits and sensors
Sen Wai Kwok et al.
APPLIED MATERIALS TODAY (2017)
Characterizing the Mechanical Properties of Fused Deposition Modelling Natural Fiber Recycled Polypropylene Composites
M. Milosevic et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
Andrew N. Dickson et al.
ADDITIVE MANUFACTURING (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
An integrated approach to customize the packaging of heritage artefacts
G. Fatuzzo et al.
ADVANCES ON MECHANICS, DESIGN ENGINEERING AND MANUFACTURING (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Production and 3D printing processing of bio-based thermoplastic filament
Eleni Gkartzou et al.
MANUFACTURING REVIEW (2017)
A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems
Patrizia Ghisellini et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications
M. Ahlhelm et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
The present and future of additive manufacturing in the aerospace sector: A review of important aspects
Adrian Uriondo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Automatic Production of Tailored Packaging for Fragile Archaeological Artifacts
Carlos Sanchez-Belenguer et al.
ACM JOURNAL ON COMPUTING AND CULTURAL HERITAGE (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)
Wood based bulk material in 3D printing processes for applications in construction
Klaudius Henke et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2013)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Oil palm fiber (OPF) and its composites: A review
S. Shinoj et al.
INDUSTRIAL CROPS AND PRODUCTS (2011)
Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process
SH Masood et al.
ASSEMBLY AUTOMATION (2005)
Laser stereolithography of ZrO2 toughened Al2O3
A Licciulli et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Photopolymerization kinetics of an epoxy-based resin for stereolithography
CE Corcione et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
GN Levy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)