☆ 4.7 Article

Secondary Raw Materials from Residual Carbon Fiber-Reinforced Composites by An Upgraded Pyrolysis Process

POLYMERS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Processing and properties of long recycled-carbon-fibre reinforced polypropylene

Andrea Fernandez et al.

Summary: Recycled carbon fibres were used as reinforcement material in polypropylene-based thermoplastic matrix composites prepared by injection moulding with different fibre/resin ratios. The stiffness and strength of the composites increased linearly with the fibre fraction, and fibre distribution and alignment in the injection flow contributed to the improvement of mechanical behaviour. However, further efforts are needed to enhance the interface performance of long recycled-carbon-fibre reinforced thermoplastic composites.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

Comprehensive study of recycling of thermosetting polymer composites - Driving force, challenges and methods

Shubham Utekar et al.

Summary: This article discusses various methods for recycling thermosetting polymer composites, emphasizing the importance of recycling in engineering applications and introducing some advanced methods and prospects.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades

Manjeet Rani et al.

Summary: The development of novel strategies for recycling and reusing fiber composites is driven by environmental and economic factors. This paper reviews various recycling methods and reuse of recovered fibers, highlighting the potential for high-value structural applications in the future. Challenges in fiber recycling and the high energy intensity of manufacturing glass and carbon fibers make them promising in terms of both environmental and economic perspectives.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Engineering, Environmental

Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes

Esfandiar Pakdel et al.

Summary: Carbon fibre reinforced composites play a crucial role in weight sensitive industries, emphasizing the importance of developing sustainable recycling solutions. Management of dry carbon fibre scraps has gained more attention recently, highlighting the need for effective strategies in dealing with waste products.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Engineering, Environmental

Recycling of polymeric composites from industrial waste by pyrolysis: Deep evaluation for carbon fibers reuse

T. R. Abdou et al.

Summary: The use of polymeric composite as reinforcement material on transport applications is increasing due to its low fuel consumption. Pyrolysis processing has been found to be the most effective method for recycling carbon fibers from discarded polymeric composites. Experimental results showed that at 550 degrees C for 1 hour, it was possible to obtain defect-free carbon fibers from the polymeric matrix.

WASTE MANAGEMENT (2021)

添加到收藏夹

Article Materials Science, Composites

Simultaneously improved mechanical and electromagnetic interference shielding properties of carbon fiber fabrics/epoxy composites via interface engineering

Shu Zhu et al.

Summary: By using electroless plating and dopamine self-polymerization, the electrical conductivity and strength of carbon fiber reinforced composites were successfully improved, enhancing the interactions between fibers and epoxy matrix. The introduction of dopamine altered the fracture mechanisms of the composites, leading to an enhancement in EMI shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Integrating carbon fiber reclamation and additive manufacturing for

Weihao Liu et al.

Summary: The study introduces a new method for recycling carbon fiber waste and manufacturing high-performance engineering parts through additive manufacturing. Experimental results show that this approach can effectively enhance the performance of 3D printed parts.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Elucidation of damage factors to recycled carbon fibers recovered from CFRPs by pyrolysis for finding optimal recovery conditions

Toshihira Irisawa et al.

Summary: The study investigated the optimal conditions for recovering recycled carbon fiber from epoxy matrix CFRP through thermal decomposition, emphasizing the need for an oxidizing atmosphere and the impact of treatment temperature and time on fiber damage. It was found that the strength reduction of the recovered carbon fiber was influenced not only by thermal oxidative decomposition, but also by its interaction with the resin, with recovery time depending on treatment temperature and the location of the fiber in CFRP.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Fibre structure preservation in composite recycling using thermolysis process

Hamza Qazi et al.

Summary: In this study, the thermolysis recycling process was used to preserve the fiber structure of waste TS-CFRP parts, with investigations on different fabric and stacking sequences. Mechanical characterization was conducted, showing that the thermolysis process can preserve fiber structure and the remanufactured composite parts have the potential to replace long virgin fibers in product manufacturing.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Engineering, Environmental

Production of hydrogen-rich gases in the recycling process of residual carbon fiber reinforced polymers by pyrolysis

A. Lopez-Urionabarrenechea et al.

Summary: This study presents a novel method to valorize the residual polymeric matrix of carbon fiber reinforced polymers (CFRP) through pyrolysis in the recycling process of carbon fibers. By optimizing operational parameters in the pyrolysis and oxidation steps, clean carbon fibers and a gaseous fraction with 75% volume of H2 were successfully obtained.

WASTE MANAGEMENT (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

An evaluation of life cycle assessment and its application to the closed-loop recycling of carbon fibre reinforced polymers

Rhys J. Tapper et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Review Engineering, Manufacturing

Additively manufactured carbon fiber-reinforced composites: State of the art and perspective

Nekoda van de Werken et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Low cost textile-grade carbon-fiber epoxy composites for automotive and wind energy applications

Nitilaksha Hiremath et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Rapidly reprocessable, degradable epoxy vitrimer and recyclable carbon fiber reinforced thermoset composites relied on high contents of exchangeable aromatic disulfide crosslinks

Hongwei Si et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Comparative life cycle energy analysis of carbon fibre pre-processing, processing and post-processing recycling methods

Di He et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

添加到收藏夹

Article Energy & Fuels

Multifunctional structural supercapacitors based on polyaniline deposited carbon fiber reinforced epoxy composites

Atif Javaid et al.

Journal of Energy Storage (2020)

添加到收藏夹

Article Chemistry, Physical

Use of a Reforming Catalyst for Hydrogen Production in the Carbonization Process of Torrefied Biomass

Alexander Lopez-Urionabarrenechea et al.

CATALYSTS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Reclamation of carbon fibers and added-value gases in a pyrolysis-based composites recycling process

A. Lopez-Urionabarrenechea et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Chemistry, Physical

Carbon fiber reinforced structural lithium-ion battery composite: Multifunctional power integration for CubeSats

Kathleen Moyer et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Multidisciplinary Sciences

A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: fibre recovery, properties and life-cycle analysis

Sankar Karuppannan Gopalraj et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Chemistry, Applied

Evaluation of HZSM-5 Zeolite as Cracking Catalyst for Upgrading the Vapours Generated in the Pyrolysis of an Epoxy-Carbon Fibre Waste Composite

N. Gastelu et al.

TOPICS IN CATALYSIS (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Prospective study of lignin-based and recycled carbon fibers in composites through meta-analysis of life cycle assessments

Frida Hermansson et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Chemistry, Physical

Positioning supercritical solvolysis among innovative recycling and current waste management scenarios for carbon fiber reinforced plastics thanks to comparative life cycle assessment

Baptiste Pillain et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Validation of carbon fibers recycling by pyro-gasification: The influence of oxidation conditions to obtain clean fibers and promote fiber/matrix adhesion in epoxy composites

Laura Mazzocchetti et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Textiles

Investigation of Interfacial and Mechanical Properties of Various Thermally-Recycled Carbon Fibers/Recycled PET Composites

Yeong-Min Baek et al.

FIBERS AND POLYMERS (2018)

添加到收藏夹

Article Chemistry, Physical

Thermo-Catalytic Treatment of Vapors in the Recycling Process of Carbon Fiber-Poly (Benzoxazine) Composite Waste by Pyrolysis

Naia Gastelu et al.

CATALYSTS (2018)

添加到收藏夹

Article Chemistry, Analytical

Kinetic analysis of the thermal decomposition of a carbon fibre-reinforced epoxy resin laminate

Pauline Tranchard et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

添加到收藏夹

Article Materials Science, Composites

On the successful chemical recycling of carbon fiber/epoxy resin composites under the mild condition

Jianjun Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Recovery of glass fibre and carbon fibres from reinforced thermosets by batch pyrolysis and investigation of fibre re-using as reinforcement in LDPE matrix

Jude A. Onwudili et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Technology readiness level assessment of composites recycling technologies

Justyna Rybicka et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Chemistry, Analytical

Recycling of carbon fibre reinforced epoxy resin composites under various oxygen concentrations in nitrogen-oxygen atmosphere

Jie Yang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

添加到收藏夹

Article Materials Science, Composites

Recovery of carbon fibers from cured and uncured carbon fiber reinforced composites wastes and their use as feedstock for a new composite production

Loris Giorgini et al.

POLYMER COMPOSITES (2015)

添加到收藏夹

Article Chemistry, Physical

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

Zhaorui Li et al.

SURFACE AND INTERFACE ANALYSIS (2014)

添加到收藏夹

Article Engineering, Manufacturing

Effect of thermal treatment temperatures on the reinforcing and interfacial properties of recycled carbon fiber-phenolic composites

Joung-Man Park et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Chemistry, Analytical

Recovery of carbon fibres by the thermolysis and gasification of waste prepreg

Felix A. Lopez et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)

添加到收藏夹

Article Polymer Science

Recycling of carbon/epoxy composites

YY Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.