Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications

Review Materials Science, Textiles

Life-cycle and environmental impact assessments on processing of plant fibres and its bio-composites: A critical review

M. Ramesh et al.

Summary: This article presents the life-cycle assessment and environmental impact assessment studies of plant fibre reinforced composites, and discusses their feasibility and challenges in industrial applications.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Effect of palm wax on the mechanical, thermal, and moisture absorption properties of thermoplastic cassava starch composites

K. Z. Hafila et al.

Summary: The current study evaluated the characteristics of thermoplastic cassava starch (TPCS) containing various levels of palm wax, showing that incorporating palm wax significantly improves the mechanical properties of starch-based thermoplastics and enhances their moisture resistance. The samples also exhibited intermolecular interactions and hydrogen bonds between TPCS and palm wax. Overall, TPCS blended with palm wax demonstrates potential as a biodegradable material with enhanced mechanical and moisture resistance properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Article Materials Science, Textiles

Crashworthiness Response of Filament Wound Kenaf/Glass Fibre-reinforced Epoxy Composite Tubes with Influence of Stacking Sequence under Intermediate-velocity Impact Load

A. B. M. Supian et al.

Summary: The study investigates the use of hybrid kenaf/glass composite tubes for enhanced crashworthiness properties under intermediate-velocity impact load conditions. By adjusting the stacking sequences of hybrid fibers, it was found that specimens with a higher kenaf fiber fraction mass had a 68% increase in energy absorbing value compared to synthetic glass composite tubes, with more stable failure mode behavior.

FIBERS AND POLYMERS (2022)

添加到收藏夹

Review Materials Science, Textiles

Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review

Zatil Hafila Kamaruddin et al.

Summary: This review discusses the structure, applications, and properties of lemongrass, emphasizing its extensive use in pharmacological activities and as a source of cellulose. The importance of lemongrass as a raw material for various industries is highlighted, along with a review of recent studies on emergent types of lemongrass fibers.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Montmorillonite Clay Content on Thermal, Mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites

P. Ramesh et al.

Summary: The study demonstrates that adding MMT clay can enhance the performance of PLA-hybrid biocomposites, especially with 1% addition showing better mechanical properties and abrasion resistance. Furthermore, PLA-bio and hybrid biocomposites exhibit higher modulus compared to pure-PLA.

SILICON (2021)

添加到收藏夹

Article Materials Science, Textiles

Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)

R. A. Ilyas et al.

Summary: In this study, sugar palm nanocrystalline celluloses (SPNCCs) were isolated from sugar palm fiber (SPF) through acid hydrolysis at different reaction times. It was found that a shorter reaction time tended to produce SPNCC with higher thermal stability.

TEXTILE RESEARCH JOURNAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Tribological behaviour of natural fibre 3D braided woven fabric reinforced PLA composites

Sateeshkumar Kanakannavar et al.

Summary: The study demonstrates that PLA composites reinforced with natural fiber 3D braided woven fabric can significantly improve wear resistance and reduce polymer film generation on the surface.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Recent advances of thermal properties of sugar palm lignocellulosic fibre reinforced polymer composites

M. R. M. Asyraf et al.

Summary: Sugar palm fiber (SPF) is considered an emerging reinforcement candidate for biocomposites, with its thermal properties being significantly affected by changes in fiber composition and surface treatment. However, there is a lack of literature summarizing the thermal properties of sugar palm biocomposites, indicating a need for further research in this area.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Polymer Science

The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites

Fatimah Athiyah Sabaruddin et al.

Summary: The thermal, thermo-mechanical and flammability properties of kenaf core hybrid polymer nanocomposites reinforced with unbleached and bleached nanocrystalline cellulose were studied. Unbleached NCC had higher lignin content and better stability in thermal and flammability properties compared to bleached NCC. Bleached NCC showed notably lower thermo-mechanical properties in the nanocomposites blend.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Micro- and Nanocellulose in Polymer Composite Materials: A Review

Abdoulhdi A. Borhana Omran et al.

Summary: Cellulose presents a promising opportunity for the development of sustainable materials, especially in the field of biocomposites. This article highlights the importance of extracting, treating, and modifying cellulose for various applications. The reinforcement of micro- and nanocellulose can lead to materials with enhanced performance, with potential for further improvements in engineering applications.

POLYMERS (2021)

添加到收藏夹

Review Materials Science, Paper & Wood

Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments

M. R. M. Asyraf et al.

Summary: Kenaf, a plant fiber mainly composed of cellulose, shows potential as a replacement for synthetic fibers in biocomposites. Chemical treatments like alkaline, silane, and acetylation can enhance fiber properties, but their effects on dynamic mechanical behavior remain understudied. Additional chemical treatments and combined methods are being explored to improve the dynamic mechanical performance of kenaf biocomposites.

CELLULOSE (2021)

添加到收藏夹

Review Polymer Science

Importance of Interfacial Adhesion Condition on Characterization of Plant-Fiber-Reinforced Polymer Composites: A Review

Ching Hao Lee et al.

Summary: Plant fibers have gained popularity due to increasing environmental awareness and are widely used in plant-fibers-reinforced polymer composites. Interfacial adhesion mechanisms play a crucial role in affecting the properties of these composites, with four key interface mechanisms highlighted. The importance of interfacial adhesion condition on the performance of plant fiber polymer composites is emphasized, as physical, thermal properties, and flexural strength are highly dependent on it.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties

S. Alsubari et al.

Summary: The interest in using natural fiber reinforced composites and sandwich structures is high due to their environmental benefits and improved performance. While there is still room for further application and improvement, integrating composite materials into sandwich structures can enhance performance and be applied in various engineering fields.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites

H. A. Aisyah et al.

Summary: The progressive application of natural fibres in polymer composites has alleviated environmental impacts. There is a growing interest in developing green materials using woven natural fibres for various applications. Woven materials have better mechanical properties and can be tailored to specific needs, making them promising materials for natural fibre polymer composites.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of the liquid natural rubber (LNR) on mechanical properties and microstructure of epoxy/silica/kenaf hybrid composite for potential automotive applications

C. N. Aiza Jaafar et al.

Summary: The study investigated the effects of rubber toughened epoxy/silica/kenaf composites on mechanical properties and microstructure, with the addition of liquid rubber enhancing the mechanical performance of the composite for potential automotive applications. SEM analysis showed that the addition of liquid rubber helped in lowering stress transfer and resulted in optimum mechanical properties, making the composite highly suitable for automotive applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Polymer Science

Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives

Abudukeremu Kadier et al.

Summary: Research has shown that using industrial waste as a substrate can improve cost competitiveness in BC production, revealing the potential high-efficiency value of industrial waste, and further optimization of culture conditions is needed to achieve large-scale production of BC from waste streams.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost

M. J. Suriani et al.

Summary: There has been a growing interest in the scientific community regarding the utilization of natural fiber-enhanced hybrid composites. Extensive studies have been conducted on natural/synthetic and natural/natural hybrid composites to enhance mechanical characteristics and applications through processes such as hybridization. Current research focuses on improving understanding of natural fiber-matrix adhesion, processing methods, and compatibility, as well as addressing the cost of natural fiber reinforced hybrid composites.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

Nur Izzah Nabilah Haris et al.

Summary: This study investigated the properties of basalt/woven glass fiber reinforced polymer hybrid polyester composites using FTIR, DMA, and TMA analyses. The results indicated that the hybrid composites exhibited higher mechanical and thermal properties compared to single reinforced composites.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Wheat Biocomposite Extraction, Structure, Properties and Characterization: A Review

Abdulrahman A. B. A. Mohammed et al.

Summary: By replacing artificial materials with wheat plant components in biocomposite materials, the health and safety of materials can be improved, bringing practical benefits in different fields.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Potential of Honeycomb-Filled Composite Structure in Composite Cross-Arm Component: A Review on Recent Progress and Its Mechanical Properties

Abd Latif Amir et al.

Summary: Pultruded glass fiber-reinforced polymer composite structures are widely used in high transmission tower cross-arms, offering better strength and environmental degradation resistance. There are performance failures in existing cross-arm members, but enhancing them with honeycomb-filled composite structures can improve service life.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

M. J. Suriani et al.

Summary: This study investigated the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites, revealing that the optimal fiber volume content was 20% for the best performance.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview

Norizan Mohd Nurazzi et al.

Summary: This article introduces the current research status and application prospects of a novel class of nanomaterials composed of carbon nanotubes, emphasizing the potential uses of CNT-reinforced polymer composites in multiple fields. The article also reviews the research on CNT-reinforced polymer composites under current covalent and non-covalent functionalization, and discusses the mechanisms related to mechanical, thermal, and electrical performance.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications

R. A. Ilyas et al.

Summary: Research into bio-polymers, specifically focusing on polylactic acid (PLA), has gained momentum in recent years due to concerns about resource depletion and pollution. Natural fiber-reinforced PLA composites have been explored as alternatives to petroleum-based materials, with an emphasis on the type of fiber used in the matrix adhesion and their mechanical properties. Additionally, the current state of natural fiber-reinforced PLA 3D printing and their functions in stimuli-responsive polymers for 4D printing applications have also been discussed in this study.

POLYMERS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Critical Determinants of Household Electricity Consumption in a Rapidly Growing City

Sharif Shofirun Sharif Ali et al.

Summary: This study investigates the determinants of household electricity consumption in urban areas, particularly in Seremban, Malaysia. The results suggest that factors such as monthly income, number of rooms, and family size play a significant role in influencing electricity usage patterns. Promoting low carbon initiatives and technology improvements are crucial for reducing energy consumption in urban regions.

SUSTAINABILITY (2021)

添加到收藏夹

Review Polymer Science

A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications

N. M. Nurazzi et al.

Summary: Hybrid natural fiber polymer composites have been the focus of recent research and innovation in the field of structural applications, aiming to improve mechanical properties by combining different materials, including natural fibers, synthetic fibers, and carbonaceous materials. These composite materials are manufactured from a variety of materials, such as rubber, elastomer, metal, ceramics, glasses, and plants, and have diverse shapes and applications in aerospace interiors, naval, civil building, industrial, and sporting goods sectors.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments

N. M. Nurazzi et al.

Summary: Chemical treatments significantly impact the thermal stability of natural fiber-reinforced polymer composites, influencing the structure, drying, and ignition temperatures. Thermo gravimetric analysis data serves as guidance in determining composite purity, composition, and stability temperatures, while also affecting the effectiveness of chemical treatments in bonding natural fibers with polymer matrix.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Natural Fiber Reinforced Composite Material for Product Design: A Short Review

M. A. Azman et al.

Summary: This article discusses the development of natural fibers and their composites in engineering applications, highlighting the challenges and potential solutions in design. The design and manufacturing of natural fiber-reinforced polymer composite products require a coordinated approach in system engineering and material selection. The applications of natural fibers include sports equipment, musical instruments, and electronic products.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications

Shubham Sharma et al.

Summary: The bioavailability of orally administered drugs depends on solubility and permeability. Enhancing the oral bioavailability of poorly soluble drugs is challenging, and polymer nanocomposites show promise in improving this. These materials combine unique characteristics of different materials to enhance drug delivery.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of Dynamic, Mechanical, and Thermal Properties of Calotropis procera Particle-Reinforced PLA Biocomposites

K. Yoganandam et al.

Summary: Adding Calotropis procera particles increases the thermal stability of polylactic acid and raises the glass transition temperature of the composite. This composite material has a wider range of applications in heat dissipation.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Reflections on Local Community Identity by Evaluating Heritage Sustainability Protection in Jugra, Selangor, Malaysia

Zainab Binti Roslan et al.

Summary: The study demonstrates that the cultural and natural heritage in Jugra have a positive impact on the socioeconomic status of the local community and their willingness to preserve heritage, as they believe heritage reflects their identity and makes them proud.

SUSTAINABILITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rheology of PLA/regenerated cellulose nanocomposites prepared by the pickering emulsion process: Network formation and modeling

Lu Cui et al.

Summary: PLA/regenerated cellulose (RC) nanocomposites with varying cellulose content were prepared using the Pickering emulsion process, demonstrating RC as a suitable reinforcement for PLA with good dispersion and network structure formation. Model analysis aided in quantitative analysis of experimental results, offering additional insights into the structure and properties of the composites.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent developments in sustainable arrowroot (Maranta arundinacea Linn) starch biopolymers, fibres, biopolymer composites and their potential industrial applications: A review

J. Tarique et al.

Summary: Raising environmental awareness has led researchers to explore environmentally friendly materials as alternatives for conventional ones. Arrowroot starch, with its high amylose content, is suitable for better film production. Blending starch with other polymers or reinforcing it with fibers can improve the properties of the materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advances of composite cross arms with incorporation of material core structures: Manufacturability, recent progress and views

A. L. Amir et al.

Summary: This paper presents a case study on enhancing the mechanical performance of high transmission towers cross arms by using composite-filled sandwich structure as an alternative to the conventional PGFRPC. The study suggests that the composite-filled sandwich structure could sustain longer and perform better under bending and compressive loads.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations

Azizatul Karimah et al.

Summary: Understanding the basic properties of natural fibers is crucial for determining their optimal uses, such as high-quality bio-composite raw materials. This review discusses the characteristics and potential uses of natural fibers, emphasizing their sustainability and economic values. The low density and high strength to weight ratio of natural fibers make them ideal for lightweight composites and reinforcement materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Mechanical Performance and Applications of CNTs Reinforced Polymer Composites-A Review

N. M. Nurazzi et al.

Summary: Carbon nanotubes (CNTs) have been widely used in polymer composite materials due to their good thermal and electrical properties, low density, and high Young's modulus as suitable nanofillers. The unique nano-dimensions and strength of CNTs make them exceptional mechanical reinforcements for various applications, although there is still limited research on their mechanical performance in polymer composites. The potential uses of CNTs hybridized with polymer composites reinforced with natural fibers have been highlighted for future development.

NANOMATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications

Stefanie Teixeira et al.

Summary: PLA can be produced from natural sources like corn or sugarcane, composted with microorganisms, and partially substitute petroleum-based plastics, but its higher cost and slower degradation rate compared to other degradable polymers hinder its complete replacement.

C-JOURNAL OF CARBON RESEARCH (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Water barrier and mechanical properties of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly (lactic acid) (PLA) blend bionanocomposites

Asmawi Nazrin et al.

Summary: The study developed novel materials that have the potential to substitute traditional plastics, thus offering important implications for improving plastic waste disposal.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Tensile and flexural properties of biodegradable jute fiber reinforced poly lactic acid composites

S. Ravi Theja Reddy et al.

Summary: The study focuses on the development of biodegradable composite materials using jute fibers and biodegradable poly lactic acid (PLA) as reinforcement and matrix, demonstrating their potential in addressing environmental concerns through tensile and flexural testing.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review

Ahmed Z. Naser et al.

Summary: Petroleum-based plastics have significant negative impacts on the environment, leading to a growing interest in alternative materials like bio-based polymers such as PLA and PHAs. The drive to reduce dependence on fossil fuels and address concerns about natural resource preservation and climate change has pushed researchers to explore the feasibility of these alternative materials. This paper provides an overview of the properties, recyclability, sustainability, and potential applications of PLA and PHAs as replacements for petroleum-based plastics.

RSC ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Production and characterization of poly (lactic acid)-based biocomposites filled with basalt fiber and flax fiber hybrid

Najah Eselini et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of MMT Clay on Mechanical, Thermal and Barrier Properties of Treated Aloevera Fiber/PLA-Hybrid Biocomposites

P. Ramesh et al.

SILICON (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Exploration of hybrid nanocarbon composite with polylactic acid for packaging applications

Yoojin Kim et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Plant Sciences

Fibre-specific regulation of lignin biosynthesis improves biomass quality in Populus

Jinshan Gui et al.

NEW PHYTOLOGIST (2020)

添加到收藏夹

Article Polymer Science

Structuring poly (lactic acid) film with excellent tensile toughness through extrusion blow molding

Cao Zengwen et al.

POLYMER (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and morphological characterization of basalt/Cissus quadrangularis hybrid fiber reinforced polylactic acid composites

A. Arul Jeya Kumar et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Accelerated Weathering and Soil Burial Effect on Biodegradability, Colour and Textureof Coir/Pineapple Leaf Fibres/PLA Biocomposites

Ramengmawii Siakeng et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Effect of TPU hard segment content on the rheological and mechanical properties of PLA/TPU blends

Mohammadreza Nofar et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Conceptual design of multi-operation outdoor flexural creep test rig using hybrid concurrent engineering approach

M. R. M. Asyraf et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Woods and composites cantilever beam: A comprehensive review of experimental and numerical creep methodologies

M. R. M. Asyraf et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Chemistry, Applied

Effect of wood particulate size on the mechanical properties of PLA biocomposite

S. Raj Sachin et al.

PIGMENT & RESIN TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Composites

Integration of TRIZ, morphological chart and ANP method for development of FRP composite portable fire extinguisher

M. R. M. Asyraf et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved Mechanical Properties and Flame Retardancy of Wood/PLA All-Degradable Biocomposites with Novel Lignin-Based Flame Retardant and TGIC

Wei Hu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanocellulose Reinforced Thermoplastic Starch (TPS), Polylactic Acid (PLA), and Polybutylene Succinate (PBS) for Food Packaging Applications

A. Nazrin et al.

FRONTIERS IN CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Paper & Wood

Effect of fiber hybridization and montmorillonite clay on properties of treated kenaf/aloe vera fiber reinforced PLA hybrid nanobiocomposite

P. Ramesh et al.

CELLULOSE (2020)

添加到收藏夹

Article Materials Science, Composites

The effects of cellulosic fillers on the mechanical, morphological, thermal, viscoelastic, and rheological properties of polyhydroxybutyrate biopolymers

Deniz Aydemir et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters

A. Le Duigou et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Review Polymer Science

Potential Application of Green Composites for Cross Arm Component in Transmission Tower: A Brief Review

M. R. M. Asyraf et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Effects of the Face/Core Layer Ratio on the Mechanical Properties of 3D Printed Wood/Polylactic Acid (PLA) Green Biocomposite Panels with a Gyroid Core

Nadir Ayrilmis et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Influence of CaCO3 in pultruded glass fiber/unsaturated polyester resin composite on flexural creep behavior using conventional and time-temperature superposition principle methods

A. N. Johari et al.

POLIMERY (2020)

添加到收藏夹

Article Engineering, Mechanical

Creep behaviour monitoring of short-term duration for fiber-glass reinforced coma-site cross-arms with unsaturated polyester resin samples using conventional analysis

A. N. Johari et al.

JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2020)

添加到收藏夹

Article Polymer Science

The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating

A. Rozilah et al.

POLYMERS (2020)

添加到收藏夹

Article Endocrinology & Metabolism

Contentious issues and evolving concepts in the clinical presentation and management of patients with COVID-19 infectionwith reference to use of therapeutic and other drugs used in Co-morbid diseases (Hypertension, diabetes etc)

Ritesh Gupta et al.

DIABETES & METABOLIC SYNDROME-CLINICAL RESEARCH & REVIEWS (2020)

添加到收藏夹

Review Materials Science, Composites

Natural fiber reinforced polylactic acid composites: A review

Ramengmawii Siakeng et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Review Materials Science, Textiles

A review on synthesis and characterization of commercially available natural fibers: Part-I

P. Madhu et al.

JOURNAL OF NATURAL FIBERS (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites

L. K. Kian et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Review Chemistry, Applied

A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization

M. R. Sanjay et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Engineering, Environmental

Compatibilizer Acidity in Coir-Reinforced PLA Composites: Matrix Degradation and Composite Properties

T. R. Rigolin et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review

Yashas Gowda Thyavihalli Girijappa et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Preparation, microstructure and performance of poly (lactic acid)-Poly (butylene succinate-co-butyleneadipate)-starch hybrid composites

Linghan Meng et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Agricultural Engineering

Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding

Asokan Pappu et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printing of continuous flax fibre reinforced biocomposites for structural applications

A. Le Duigou et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Conceptual design of creep testing rig for full-scale cross arm using TRIZ-Morphological chart-analytic network process technique

M. R. M. Asyraf et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Review Biotechnology & Applied Microbiology

A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications

Tommaso Casalini et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

A Transdisciplinary Approach for Analyzing Stress Flow Patterns in Biostructures

Reena Patel et al.

MATHEMATICAL AND COMPUTATIONAL APPLICATIONS (2019)

添加到收藏夹

Article Polymer Science

Preparation and properties of poly(lactic acid)/sesbania gum/nano-TiO2 composites

Qing Zhang et al.

POLYMER BULLETIN (2018)

添加到收藏夹

Article Polymer Science

Effect of the viscosity ratio on the PLA/PA10.10 bioblends morphology and mechanical properties

J. Cailloux et al.

EXPRESS POLYMER LETTERS (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Isolation and characterization of nanocrystalline cellulose from roselle-derived microcrystalline cellulose

Lau Kia Kian et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Chemistry, Physical

Poly(lactic acid) (PLA) Based Tear Resistant and Biodegradable Flexible Films by Blown Film Extrusion

Norma Mallegni et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Improvement of Mechanical Properties, Thermal Stability, and Water Absorption Resistance of an Eco-Friendly PLA/Kenaf Biocomposite Using Acetylation

Taek-Jun Chung et al.

APPLIED SCIENCES-BASEL (2018)

添加到收藏夹

Article Environmental Studies

The impact of the Tokyo Metropolitan Emissions Trading Scheme on reducing greenhouse gas emissions: findings from a facility-based study

Masayo Wakabayashi et al.

CLIMATE POLICY (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Conceptual design of automobile engine rubber mounting composite using TRIZ-Morphological chart-analytic network process technique

A. M. Noor Azammi et al.

DEFENCE TECHNOLOGY (2018)

添加到收藏夹

Proceedings Paper Materials Science, Paper & Wood

Thermal properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites

R. Siakeng et al.

WOOD AND BIOFIBER INTERNATIONAL CONFERENCE (WOBIC 2017) (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications

Guilong Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Automation & Control Systems

Conceptual design of a natural fibre-reinforced composite automotive anti-roll bar using a hybrid approach

M. T. Mastura et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites

N. Saba et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

添加到收藏夹

Article Polymer Science

Rheological study of crystallization behavior of polylactide and its flax fiber composites

Andrea Arias et al.

JOURNAL OF POLYMER RESEARCH (2017)

添加到收藏夹

Article Polymer Science

Polylactide (PLA) and acrylonitrile butadiene rubber (NBR) blends: The effect of ACN content on morphology, compatibility and mechanical properties

Mahshid Maroufkhani et al.

POLYMER (2017)

添加到收藏夹

Article Materials Science, Characterization & Testing

Physical blends of PLA with high vinyl acetate containing EVA and their rheological, thermo-mechanical and morphological responses

Rajendra Kumar Singla et al.

POLYMER TESTING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection

J. M. Chacon et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Proceedings Paper Materials Science, Textiles

Mechanical properties of polylactic acid composites reinforced with cotton gin waste and flax fibers

Rohan M. Bajracharya et al.

3RD INTERNATIONAL CONFERENCE ON NATURAL FIBERS: ADVANCED MATERIALS FOR A GREENER WORLD, ICNF 2017 (2017)

添加到收藏夹

Proceedings Paper Metallurgy & Metallurgical Engineering

Additively Manufactured PLA under static loading: strength/cracking behaviour vs. deposition angle

A. A. Ahmed et al.

XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017 (2017)

添加到收藏夹

Review Chemistry, Physical

On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications

Marina Patricia Arrieta et al.

MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Organomontmorillonite/graphene-PLA/PCL nanofilled blends: New strategy to enhance the functional properties of PLA/PCL blend

Boubkeur Seddik Bouakaz et al.

APPLIED CLAY SCIENCE (2017)

添加到收藏夹

Review Pharmacology & Pharmacy

Polylactic acid (PLA) controlled delivery carriers for biomedical applications

Betty Tyler et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Review Pharmacology & Pharmacy

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Shady Farah et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Article Biochemistry & Molecular Biology

Conformational Footprint in Hydrolysis-Induced Nanofibrillation and Crystallization of Poly(lactic acid)

Huan Xu et al.

BIOMACROMOLECULES (2016)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical behavior of Kevlar/basalt reinforced polypropylene composites

Aswani Kumar Bandaru et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Polymer Science

Bleached extruder chemi-mechanical pulp fiber-PLA composites: Comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites

Zhaozhe Yang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Article Engineering, Manufacturing

A design of experiments approach to optimise tensile and notched bending properties of fused deposition modelling parts

Chrisian A. Griffiths et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Melt volume flow rate and melt flow rate of kenaf fibre reinforced Floreon/magnesium hydroxide biocomposites

C. H. Lee et al.

SPRINGERPLUS (2016)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Effect of build parameters on processing efficiency and material performance in fused deposition modelling

C. A. Griffiths et al.

SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)

添加到收藏夹

Article Chemistry, Physical

Synergy between fillers in organomontmorillonite/graphene-PLA nanocomposites

Boubkeur Seddik Bouakaz et al.

APPLIED CLAY SCIENCE (2015)

添加到收藏夹

Article Engineering, Manufacturing

Characterization of kenaf fiber composites prepared with tributyl citrate plasticized cellulose acetate

Chaowei Pang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Engineering, Manufacturing

High performance hybrid PP and PLA biocomposites reinforced with short man-made cellulose fibres and softwood flour

A. K. Bledzki et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and theoretical analyses of mechanical properties of PP/PLA/clay nanocomposites

Hassan Ebadi-Dehaghani et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites

A. Awal et al.

MECHANICS OF MATERIALS (2015)

添加到收藏夹

Article Polymer Science

Polylactic Acid in Medicine

Seyed Mohammad Davachi et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of multiwalled carbon nanotubes (MWCNTs) on rheological, thermal and electrical properties of PC/ABS blend

Amir Rostami et al.

RSC ADVANCES (2015)

添加到收藏夹

Review Polymer Science

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

Layth Mohammed et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Article Polymer Science

Evaluation of morphological architecture of cellulose chains in grass during conversion from macro to nano dimensions

Jitendra K. Pandey et al.

E-POLYMERS (2014)

添加到收藏夹

Article Materials Science, Textiles

Bio-composites: Development and Mechanical Characterization of Banana/Sisal Fibre Reinforced Poly Lactic Acid (PLA) Hybrid Composites

B. Asaithambi et al.

FIBERS AND POLYMERS (2014)

添加到收藏夹

Article Materials Science, Composites

Evaluation of jute/glass hybrid composite sandwich: Water resistance, impact properties and life cycle assessment

Surya D. Pandita et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Review Materials Science, Composites

Development and characterization of PLA-based green composites: A review

Pramendra Kumar Bajpai et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ-Morphological Chart-Analytic Hierarchy Process method

M. R. Mansor et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions

B. M. Tymrak et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Mechanics

Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties

A. Komuraiah et al.

MECHANICS OF COMPOSITE MATERIALS (2014)

添加到收藏夹

Article Engineering, Chemical

Improvement of Blown Film Extrusion of Poly(Lactic Acid): Structure-Processing-Properties Relationships

Benoit Mallet et al.

POLYMER ENGINEERING AND SCIENCE (2014)

添加到收藏夹

Review Polymer Science

Poly (lactic acid) foaming

Mohammadreza Nofar et al.

PROGRESS IN POLYMER SCIENCE (2014)

添加到收藏夹

Article Polymer Science

Enhancement of Mechanical and Dynamic Mechanical Properties of Hydrophilic Nanoclay Reinforced Polylactic Acid/Polycaprolactone/Oil Palm Mesocarp Fiber Hybrid Composites

Chern Chiet Eng et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2014)

添加到收藏夹

Article Biophysics

Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering

Abdalla Abdal-haya et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2013)

添加到收藏夹

Article Engineering, Manufacturing

Manufacture and characterisation of thermoplastic composites made from PLA/hemp co-wrapped hybrid yarn prepregs

Behnaz Baghaei et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Process induced residual stresses and distortions in pultrusion

Ismet Baran et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Composites

Micro fibre reinforced PLA and PP composites: Enzyme modification, mechanical and thermal properties

Abdullah A. Mamun et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Agricultural Engineering

Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites

G. Gamon et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

添加到收藏夹

Article Polymer Science

Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite

Mohammad R. Kaiser et al.

IRANIAN POLYMER JOURNAL (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels

A. A. Ramadhan et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Polymer Science

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal, rheological and biodegradation properties of poly(lactic acid) based systems

E. Fortunati et al.

POLYMER DEGRADATION AND STABILITY (2013)

添加到收藏夹

Review Polymer Science

Polylactide (PLA)-based nanocomposites

Jean-Marie Raquez et al.

PROGRESS IN POLYMER SCIENCE (2013)

添加到收藏夹

Article Engineering, Mechanical

Tribological behavior of natural fiber reinforced PLA composites

Pramendra Kumar Bajpai et al.

WEAR (2013)

添加到收藏夹

Proceedings Paper Engineering, Biomedical

Selecting process parameters in RepRap additive manufacturing system for PLA scaffolds manufacture

Joaquim de Ciurana et al.

FIRST CIRP CONFERENCE ON BIOMANUFACTURING (2013)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Poly-lactic acid synthesis for application in biomedical devices - A review

Astrid J. R. Lasprilla et al.

BIOTECHNOLOGY ADVANCES (2012)

添加到收藏夹

Review Engineering, Manufacturing

Critical review of recent publications on use of natural composites in infrastructure

David B. Dittenber et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Materials Science, Textiles

Effects of Surface Treatment of Ramie Fibers in a Ramie/Poly(lactic acid) Composite

Hae Young Choi et al.

FIBERS AND POLYMERS (2012)

添加到收藏夹

Article Polymer Science

Effects of compatibilizers on the mechanical properties of ABS/PLA composites

Mi Yeong Jo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

添加到收藏夹

Review Materials Science, Composites

A review on mechanical behavior of natural fiber based hybrid composites

Srinivas Nunna et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)

添加到收藏夹

Article Materials Science, Composites

Comparative studies of mechanical and morphological properties of polylactic acid and polypropylene based natural fiber composites

Pramendra Kumar Bajpai et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)

添加到收藏夹

Review Polymer Science

Biocomposites reinforced with natural fibers: 2000-2010

Omar Faruk et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Agricultural Engineering

Cellulose nanowhiskers separated from a bio-residue from wood bioethanol production

Kristiina Oksman et al.

BIOMASS & BIOENERGY (2011)

添加到收藏夹

Article Engineering, Environmental

Mechanical and thermal properties of poly(lactic acid) composites with rice straw fiber modified by poly(butyl acrylate)

Lijun Qin et al.

CHEMICAL ENGINEERING JOURNAL (2011)

添加到收藏夹

Review Engineering, Manufacturing

Green composites: A brief review

F. P. La Mantia et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes

M. T. Kim et al.

COMPOSITES PART B-ENGINEERING (2011)

添加到收藏夹

Article Materials Science, Composites

Effect of bark flour on viscoelastic behavior of high density polyethylene

Kamini Sewda et al.

JOURNAL OF COMPOSITE MATERIALS (2011)

添加到收藏夹

Article Engineering, Environmental

PLA Based Biopolymer Reinforced with Natural Fibre: A Review

Tapasi Mukherjee et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)

添加到收藏夹

Review Materials Science, Multidisciplinary

Kenaf fiber reinforced composites: A review

H. M. Akil et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Biochemistry & Molecular Biology

Polylactide-Based Renewable Green Composites from Agricultural Residues and Their Hybrids

Calistor Nyambo et al.

BIOMACROMOLECULES (2010)

添加到收藏夹

Article Materials Science, Paper & Wood

On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid

Maria D. Sanchez-Garcia et al.

CELLULOSE (2010)

添加到收藏夹

Article Materials Science, Paper & Wood

Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch (OPEFB)

Farah Fahma et al.

CELLULOSE (2010)

添加到收藏夹

Article Engineering, Manufacturing

Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites

M. S. Islam et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Manufacturing

Effect of montmorillonite clay on flax fabric reinforced poly lactic acid composites with amphiphilic additives

Rakesh Kumar et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Manufacturing

Mercerization of sisal fibers: Effect of tension on mechanical properties of sisal fiber and fiber-reinforced composites

Jun Tae Kim et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Manufacturing

Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites

Tao Yu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Biodegradation of a silkworm silk/PLA composite

Hoi-Yan Cheung et al.

COMPOSITES PART B-ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Composites

Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes

Petra Poetschke et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Review Food Science & Technology

Poly-Lactic Acid: Production, Applications, Nanocomposites, and Release Studies

Majid Jamshidian et al.

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2010)

添加到收藏夹

Article Engineering, Chemical

Characterization of an antioxidant polylactic acid (PLA) film prepared with α-tocopherol, BHT and polyethylene glycol using film cast extruder

Youngjae Byun et al.

JOURNAL OF FOOD ENGINEERING (2010)

添加到收藏夹

Article Engineering, Environmental

Rheological, Mechanical and Thermal Behaviour of Wood Polymer Composites Based on Recycled Polypropylene

A. Ares et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Biodegradable green composites reinforced by the fiber recycling from disposable chopsticks

Yeng-Fong Shih et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Engineering, Chemical

Linear and Nonlinear Melt Rheology and Extrudate Swell of Acrylonitrile-Butadiene-Styrene and Organoclay-Filled Acrylonitrile-Butadiene-Styrene Nanocomposite

Amir Saadat et al.

POLYMER ENGINEERING AND SCIENCE (2010)

添加到收藏夹

Article Engineering, Manufacturing

Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose

Kazuya Okubo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Manufacturing

Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas

Nina Graupner et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical and thermal properties of chicken feather fiber/PLA green composites

Sha Cheng et al.

COMPOSITES PART B-ENGINEERING (2009)

添加到收藏夹

Article Materials Science, Composites

Bio-composites of kenaf fibers in polylactide: Role of improved interfacial adhesion in the carding process

Byoung-Ho Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Forestry

Effect of surface modification of beech wood flour on mechanical and thermal properties of poly (3-hydroxybutyrate)/wood flour composites

Adriana Gregorova et al.

HOLZFORSCHUNG (2009)

添加到收藏夹

Article Engineering, Biomedical

Toughness decrease of PLA-PHBHHx blend films upon surface-confined photopolymerization

Rahul M. Rasal et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)

添加到收藏夹

Article Engineering, Environmental

Effect of Matrix-Particle Interfacial Adhesion on the Mechanical Properties of Poly(lactic acid)/Wood-Flour Micro-Composites

Eustathios Petinakis et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2009)

添加到收藏夹

Article Materials Science, Composites

Recent Development in Natural Fiber Reinforced Polypropylene Composites

Ramakrishna Malkapuram et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Preparation and properties of short natural fiber reinforced poly(lactic acid) composites

Yu Tao et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)

添加到收藏夹

Article Chemistry, Applied

Isolation, preparation and characterization of cellulose microfibers obtained from bagasse

Deeparlian Bhattacharya et al.

CARBOHYDRATE POLYMERS (2008)

添加到收藏夹

Article Engineering, Manufacturing

Effect of recycling on mechanical behaviour of biocompostable flax/poly(L-lactide) composites

Antoine Le Duigou et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

添加到收藏夹

Article Materials Science, Composites

Cellulose nanofiber-reinforced polylactic acid

Atsuhiro Iwatake et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Review Materials Science, Composites

Impact and tensile properties of PLA/Cordenka and PLA/flax composites

Benjamin Bax et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Polymer Science

Isothermal crystallization behavior of hybrid biocomposite consisting of regenerated cellulose fiber, clay, and poly(lactic acid)

Seung-Hwan Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of kenaf fibers and kenaf/PLA composites

Shinji Ochi

MECHANICS OF MATERIALS (2008)

添加到收藏夹

Review Polymer Science

Flammability and fire resistance of composites reinforced by natural fibers

Ryszard Kozlowski et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2008)

添加到收藏夹

Review Polymer Science

Processing technologies for poly(lactic acid)

L-T Lim et al.

PROGRESS IN POLYMER SCIENCE (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

How to improve mechanical properties of polylactic acid with bamboo fibers

Ryoko Tokoro et al.

JOURNAL OF MATERIALS SCIENCE (2008)

添加到收藏夹

Article Materials Science, Composites

Fabrication and mechanical properties of completely biodegradable hemp fiber reinforced polylactic acid composites

Ruihua Hu et al.

JOURNAL OF COMPOSITE MATERIALS (2007)

添加到收藏夹

Article Forestry

A global rheological model of wood cantilever as applied to wood drying

Mohssine Moutee et al.

WOOD SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

Review Polymer Science

Poly(lactic acid) fiber: An overview

Bhuvanesh Gupta et al.

PROGRESS IN POLYMER SCIENCE (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

The effect of silane treated- and untreated-talc on the mechanical and physico-mechanical properties of poly(lactic acid)/newspaper fibers/talc hybrid composites

M. S. Huda et al.

COMPOSITES PART B-ENGINEERING (2007)

添加到收藏夹

Article Chemistry, Applied

Properties of biocomposites based on lignocellulosic fillers

L. Averous et al.

CARBOHYDRATE POLYMERS (2006)

添加到收藏夹

Article Materials Science, Composites

Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study

Masud S. Huda et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials. I. hemp fibres

LY Mwaikambo et al.

JOURNAL OF MATERIALS SCIENCE (2006)

添加到收藏夹

Review Polymer Science

Synthesis of poly(lactic acid): A review

R Mehta et al.

JOURNAL OF MACROMOLECULAR SCIENCE-POLYMER REVIEWS (2005)

添加到收藏夹

Article Mechanics

Melt rheology of variable L-content poly(lactic acid)

JR Dorgan et al.

JOURNAL OF RHEOLOGY (2005)

添加到收藏夹

Article Demography

Metabolism and driving forces of Chinese urban household comsumption

JR Liu et al.

POPULATION AND ENVIRONMENT (2005)

添加到收藏夹

Article Polymer Science

Modification of poly(lactic acid) films: Enhanced wettability from surface-confined photografting and increased degradation rate due to an artifact of the photografting process

AV Janorkar et al.

MACROMOLECULES (2004)

添加到收藏夹

Article Materials Science, Composites

Study of areca-reinforced phenol formaldehyde composites

RP Swamy et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)

添加到收藏夹

Article Engineering, Manufacturing

Rheology of HDPE-wood composites. I. Steady state shear and extensional flow

TQ Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

添加到收藏夹

Article Materials Science, Composites

Biodegradable composites based on L-polylactide and jute fibres

D Plackett et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Composites

Kenaf reinforced biodegradable composite

T Nishino et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Polymer Science

Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production

ETH Vink et al.

POLYMER DEGRADATION AND STABILITY (2003)

添加到收藏夹

Article Materials Science, Characterization & Testing

Biopolymers: overview of several properties and consequences on their applications

K Van de Velde et al.

POLYMER TESTING (2002)

添加到收藏夹

Article Engineering, Environmental

Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world

AK Mohanty et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2002)

添加到收藏夹

Review Engineering, Environmental

A literature review of poly(lactic acid)

D Garlotta

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)

添加到收藏夹

Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications

相关参考文献