相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Three-dimensional printing of click functionalized, peptide patterned scaffolds for osteochondral tissue engineering
Jason L. Guo et al.
Bioprinting (2021)
In situ printing of scaffolds for reconstruction of bone defects
Azadeh Mostafavi et al.
ACTA BIOMATERIALIA (2021)
Electropsun Polycaprolactone Fibres in Bone Tissue Engineering: A Review
Nadeem Siddiqui et al.
MOLECULAR BIOTECHNOLOGY (2021)
Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models
Joao Araujo Afonso et al.
RAPID PROTOTYPING JOURNAL (2021)
Polycaprolactone-Based Scaffolds Facilitates Osteogenic Differentiation of Human Adipose-Derived Stem Cells in a Co-Culture System
Ismail Rozila et al.
POLYMERS (2021)
3D-printed cell-free PCL-MECM scaffold with biomimetic micro-structure and micro-environment to enhance in situ meniscus regeneration
Weimin Guo et al.
BIOACTIVE MATERIALS (2021)
Epithelial Growth Factor-Anchored on Polycaprolactone/6-deoxy-6-amino-β-cyclodextrin Nanofibers: In Vitro and In Vivo Evaluation
Edgar D. Moyers-Montoya et al.
POLYMERS (2021)
Chondrogenic Commitment of Human Bone Marrow Mesenchymal Stem Cells in a Perfused Collagen Hydrogel Functionalized with hTGF-β1-Releasing PLGA Microcarrier
Erwin Pavel Lamparelli et al.
PHARMACEUTICS (2021)
The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA)
Natalia von Windheim et al.
RAPID PROTOTYPING JOURNAL (2021)
Additive manufacturing a powerful tool for the aerospace industry
Mahyar Khorasani et al.
RAPID PROTOTYPING JOURNAL (2021)
The influence of process parameters on the impact resistance of 3D printed PLA specimens under water-absorption and heat-treated conditions
Pradeep Kumar Mishra et al.
RAPID PROTOTYPING JOURNAL (2021)
Comparative study of the flexural properties of ABS, PLA and a PLA-wood composite manufactured through fused filament fabrication
J. A. Travieso-Rodriguez et al.
RAPID PROTOTYPING JOURNAL (2021)
Experimental study of the synergistic effect and network regulation mechanisms of an applied combination of BMP-2, VEGF, and TGF-β1 on osteogenic differentiation
Zhihao Wang et al.
JOURNAL OF CELLULAR BIOCHEMISTRY (2020)
Development of mussel-inspired 3D-printed poly (lactic acid) scaffold grafted with bone morphogenetic protein-2 for stimulating osteogenesis
Cheng-Hsin Cheng et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Evaluation of Strontium-Doped Nanobioactive Glass Cement for Dentin-Pulp Complex Regeneration Therapy
Nandin Mandakhbayar et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
A comprehensive investigation of the mechanical behavior and the dielectrics of pure polylactic acid (PLA) and PLA with graphene (GnP) in fused deposition modeling (FDM)
N. Vidakis et al.
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2019)
Three-dimensional printing of multilayered tissue engineering scaffolds
Sean M. Bittner et al.
MATERIALS TODAY (2018)
Multiscale Porosity Directs Bone Regeneration in Biphasic Calcium Phosphate Scaffolds
Laurence E. Rustom et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Multiscale Porosity Directs Bone Regeneration in Biphasic Calcium Phosphate Scaffolds
Laurence E. Rustom et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
A New Bone Substitute Developed from 3D-Prints of Polylactide (PLA) Loaded with Collagen I: An In Vitro Study
Ulrike Ritz et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
BMP-2 immobilized PLGA/hydroxyapatite fibrous scaffold via polydopamine stimulates osteoblast growth
Xingyu Zhao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration
Chen Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Hyperelastic bone: A highly versatile, growth factor-free, osteoregenerative, scalable, and surgically friendly biomaterial
Adam E. Jakus et al.
SCIENCE TRANSLATIONAL MEDICINE (2016)
Designing Porous Bone Tissue Engineering Scaffolds with Enhanced Mechanical Properties from Composite Hydrogels Composed of Modified Alginate, Gelatin, and Bioactive Glass
Bapi Sarker et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Porous Bone Tissue Engineering Scaffolds with Enhanced Mechanical Properties from Composite Hydrogels Composed of Modified Alginate, Gelatin, and Bioactive Glass
Bapi Sarker et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Biodegradation of 1,4-dioxane: Effects of enzyme inducers and trichloroethylene
Steven Hand et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2015)
Reinforcement of hydrogels using three-dimensionally printed microfibres
Jetze Visser et al.
NATURE COMMUNICATIONS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Effective Immobilization of BMP-2 Mediated by Polydopamine Coating on Biodegradable Nanofibers for Enhanced in Vivo Bone Formation
Hyeong-jin Cho et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Poly(dopamine) coating to biodegradable polymers for bone tissue engineering
Wei-Bor Tsai et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2014)
Natural and synthetic biodegradable polymers: different scaffolds for cell expansion and tissue formation
Annalia Asti et al.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2014)
Poly(dopamine)-Assisted Immobilization of Arg-Gly-Asp Peptides, Hydroxyapatite, and Bone Morphogenic Protein-2 on Titanium to Improve the Osteogenesis of Bone Marrow Stem Cells
Chih-Yuan Chien et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Polydopamine-Assisted Osteoinductive Peptide Immobilization of Polymer Scaffolds for Enhanced Bone Regeneration by Human Adipose-Derived Stem Cells
Eunkyung Ko et al.
BIOMACROMOLECULES (2013)
Air jet spinning of hydroxyapatite/poly(lactic acid) hybrid nanocomposite membrane mats for bone tissue engineering
Abdalla Abdal-haya et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Qiu Li Loh et al.
TISSUE ENGINEERING PART B-REVIEWS (2013)
1-Step Versus 2-Step Immobilization of Alkaline Phosphatase and Bone Morphogenetic Protein-2 onto Implant Surfaces Using Polydopamine
Arnold W. G. Nijhuis et al.
TISSUE ENGINEERING PART C-METHODS (2013)
Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering
Yongxiang Luo et al.
BIOFABRICATION (2013)
Immobilization of Bone Morphogenetic Protein on DOPA- or Dopamine-Treated Titanium Surfaces to Enhance Osseointegration
Jeonghwa Kang et al.
BIOMED RESEARCH INTERNATIONAL (2013)
Bone Regeneration Based on Tissue Engineering Conceptions - A 21st Century Perspective
Jan Henkel et al.
BONE RESEARCH (2013)
Computational modeling of adherent cell growth in a hollow-fiber membrane bioreactor for large-scale 3-D bone tissue engineering
Davod Mohebbi-Kalhori et al.
JOURNAL OF ARTIFICIAL ORGANS (2012)
A highly organized three-dimensional alginate scaffold for cartilage tissue engineering prepared by microfluidic technology
Chen-Chie Wang et al.
BIOMATERIALS (2011)
Feeder-free self-renewal of human embryonic stem cells in 3D porous natural polymer scaffolds
Zhensheng Li et al.
BIOMATERIALS (2010)
Biodegradable polymeric nanoparticles based drug delivery systems
Avnesh Kumari et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2010)
A Local Application of Recombinant Human Fibroblast Growth Factor 2 for Tibial Shaft Fractures: A Randomized, Placebo-Controlled Trial
Hiroshi Kawaguchi et al.
JOURNAL OF BONE AND MINERAL RESEARCH (2010)
A three-dimensional scaffold with precise micro-architecture and surface micro-textures
Alvaro Mata et al.
BIOMATERIALS (2009)
Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
Pamela Habibovic et al.
BIOMATERIALS (2008)
Bone response and mechanical strength of rabbit femoral defects filled with injectable CaP cements containing TGF-ß1 loaded gelatin microparticles
Dennis P. Link et al.
BIOMATERIALS (2008)
Biomaterials in orthopaedics
M. Navarro et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2008)
Nanofibrous poly(lactic acid)/hydroxyapatite composite scaffolds for guided tissue regeneration
Sung In Jeong et al.
MACROMOLECULAR BIOSCIENCE (2008)
Repair of critical size defects in the rat cranium using ceramic-reinforced PLA scaffolds obtained by supercritical gas foaming
Marc-Olivier Montjovent et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
A literature review on biomaterials in sinus augmentation procedures
Hilde Browaeys et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2007)
Bone augmentation techniques
Bradley S. McAllister et al.
JOURNAL OF PERIODONTOLOGY (2007)
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
K Rezwan et al.
BIOMATERIALS (2006)
Biodegradable HA-PLA 3-D porous scaffolds: Effect of nano-sized filler content on scaffold properties
CR Kothapalli et al.
ACTA BIOMATERIALIA (2005)
Chondrogenic potential of multipotential cells from human adipose tissue
JI Huang et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2004)
Tissue engineered microsphere-based matrices for bone repair: design and evaluation
M Borden et al.
BIOMATERIALS (2002)