相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Quality of Oil- and Wax-Based Surface Finishes on Thermally Modified Oak Wood
Zuzana Vidholdova et al.
COATINGS (2021)
Colour Stabilisation of Surface of Four Thermally Modified Woods with Saturated Water Vapour by Finishes
Zuzana Vidholdova et al.
POLYMERS (2021)
Glossiness Evaluation of Coated Wood Surfaces as Function of Varnish Type and Exposure to Different Conditions
Emilia-Adela Salca et al.
COATINGS (2021)
Photodegradation of Unmodified and Thermally Modified Wood Due to Indoor Lighting
Dace Cirule et al.
FORESTS (2021)
THE INFLUENCE OF ULTRAVIOLET RADIATION ON THE COLOUR OF THERMO-MECHANICALLY MODIFIED BEECH AND OAK WOOD
Agnieszka Laskowska
MADERAS-CIENCIA Y TECNOLOGIA (2020)
EFFECT OF APPLYING FINISHING PRODUCTS AND SANDING ON THE SURFACE OF MARUPA WOOD
Marcella Hermida de Paula et al.
MADERAS-CIENCIA Y TECNOLOGIA (2020)
The impact of natural and artificial weathering on the visual, colour and structural changes of seven tropical woods
Ladislav Reinprecht et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Effect of short-term thermomechanical densification of wood veneers on the properties of birch plywood
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Weathering resistance of thermally modified wood finished with coatings of diverse formulations
Rene Herrera et al.
PROGRESS IN ORGANIC COATINGS (2018)
Surface gloss of lacquered medium density fibreboard panels veneered with thermally compressed birch wood
Pavlo Bekhta et al.
PROGRESS IN ORGANIC COATINGS (2018)
Adhesion strength of thermally compressed and varnished wood (TCW) substrate
Pavlo Bekhta et al.
PROGRESS IN ORGANIC COATINGS (2018)
Surface Changes of Selected Hardwoods Due to Weather Conditions
Ivan Kubovsky et al.
FORESTS (2018)
Chemical Composition and Selected Physical Properties of Oak Wood (Quercus robur L.) Modified by Cyclic Thermo-Mechanical Treatment
Agnieszka Laskowska et al.
BIORESOURCES (2018)
Color Change of Selected Wood Species Affected by Thermal Treatment and Sanding
Maria Hrckova et al.
BIORESOURCES (2018)
Evaluation of Dynamic Contact Angle of Loose and Tight Sides of Thermally Compressed Birch Veneer
Pavlo Bekhta et al.
DRVNA INDUSTRIJA (2018)
Thermally modified Scots pine and Norway spruce wood as substrate for coating systems
Michael Altgen et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2017)
Evaluation of Selected Properties of Alder Wood as Functions of Sanding and Coating
Emilia-Adela Salca et al.
COATINGS (2017)
Effects of short-term thermomechanical densification on the structure and properties of wood veneers
Pavlo Bekhta et al.
WOOD MATERIAL SCIENCE & ENGINEERING (2017)
Some Coating Properties of Black Alder Wood as a Function of Varnish Type and Application Method
Emilia-Adela Salca et al.
BIORESOURCES (2016)
Anatomical study of short-term thermo-mechanically densified alder wood veneer with low moisture content
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2016)
The impact of UV radiation on the change of colour and composition of the surface of lime wood treated with a CO2 laser
Ivan Kubovsky et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2016)
Effects of Wood Roughness, Light Pigments, and Water Repellent on the Color Stability of Painted Spruce Subjected to Natural and Accelerated Weathering
Ladislav Reinprecht et al.
BioResources (2015)
Surface wettability of short-term thermo-mechanically densified wood veneers
Pavlo Bekhta et al.
European Journal of Wood and Wood Products (2015)
Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment
Huseyin Pelit et al.
JOURNAL OF WOOD SCIENCE (2015)
Colour Stability of Thermally Modified Wood during Short-Term Photodegradation
Laszlo Tolvaj et al.
BioResources (2014)
Colour in short-term thermo-mechanically densified veneer of various wood species
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2014)
Gloss of thermally densified alder (Alnus glutinosa Goertn.), beech (Fagus sylvatica L.), birch (Betula verrucosa Ehrh.), and pine (Pinus sylvestris L.) wood veneers
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2014)
Effect of thermomechanical densification on surface roughness of wood veneers
Pavlo Bekhta et al.
WOOD MATERIAL SCIENCE & ENGINEERING (2014)
Effect of pre-pressing of veneer on the glueability and properties of veneer-based products
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)
Relationship Between Wood Color Parameters Measured by the CIELab System and Extractive and Phenol Content in Acacia mangium and Vochysia guatemalensis from Fast-Growth Plantations
Roger Moya et al.
MOLECULES (2012)
Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers
Papa Niokhor Diouf et al.
APPLIED SURFACE SCIENCE (2011)
Properties of plywood manufactured from compressed veneer as building material
Pavlo Bekhta et al.
MATERIALS & DESIGN (2009)
Study of the effect of photo-irradiation on the surface chemistry of wood
KK Pandey
POLYMER DEGRADATION AND STABILITY (2005)
A note on the influence of extractives on the photo-discoloration and photo-degradation of wood
KK Pandey
POLYMER DEGRADATION AND STABILITY (2005)
Combined densification and thermo-hydro-mechanical processing of wood
P Navi et al.
MRS BULLETIN (2004)
Color stability of heat-treated wood during artificial weathering
N Ayadi et al.
HOLZ ALS ROH-UND WERKSTOFF (2003)
Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood
P Bekhta et al.
HOLZFORSCHUNG (2003)
Comparisons of chemical characteristic variations for photodegraded softwood and hardwood with/without polyurethane clear coatings
HT Chang et al.
POLYMER DEGRADATION AND STABILITY (2002)