☆ 4.6 Article

Tool Wear and Milling Characteristics for Hybrid Additive Manufacturing Combining Laser Powder Bed Fusion and In Situ High-Speed Milling

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Artificial Intelligence

Estimation of tool wear and optimization of cutting parameters based on novel ANFIS-PSO method toward intelligent machining

Longhua Xu et al.

Summary: The study proposed an intelligent model, ANFIS, to estimate tool wear, which showed better performance compared with other intelligent models. Additionally, the VCPSO algorithm was used to obtain the best combinations of milling parameters based on minimum cutting power, surface roughness, and maximum MRR.

JOURNAL OF INTELLIGENT MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Tool wear mechanism and prediction in milling TC18 titanium alloy using deep learning

Junyan Ma et al.

Summary: The study introduced a real-life tool wear experiment for milling TC18, and analyzed the three stages of tool wear in detail based on micro-topography and chemical elements. By utilizing deep learning methods, tool wear prediction models were established, offering a new approach for monitoring tool wear on-line with errors within 8% for predicted minimum values.

MEASUREMENT (2021)

添加到收藏夹

Review Automation & Control Systems

Current trends and research opportunities in hybrid additive manufacturing

Ugur M. Dilberoglu et al.

Summary: Despite the rapid growth in the past decade, industrial adoption of additive manufacturing has not yet been achieved due to limitations. A recent trend is to integrate additive manufacturing with secondary production techniques to alleviate its inherent drawbacks. Hybrid additive manufacturing solutions can help overcome current barriers by leveraging the combined merits of merging technologies.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Design Rules for Hybrid Additive Manufacturing Combining Selective Laser Melting and Micromilling

David Sommer et al.

Summary: The study evaluates fundamental properties of a hybrid manufacturing approach that combines selective laser melting and high speed milling, characterizes typical geometrical features and concludes on a catalogue of design rules. The hybrid approach demonstrates higher geometric accuracy and improved surface roughness compared to sole selective laser melting, with specific design rules identified for basic geometric elements.

MATERIALS (2021)

添加到收藏夹

Review Automation & Control Systems

Powder-based laser hybrid additive manufacturing of metals: a review

Amaia Jimenez et al.

Summary: Recent advancements in additive manufacturing have expanded its application from prototyping to producing functional parts, particularly in the aerospace, biomedical, and automotive industries. However, achieving tight geometrical tolerances and strict surface integrity requirements often requires extensive post-processing, leading to the emergence of hybrid AM solutions that integrate additive manufacturing with post-processing technologies. Research is focused on combining laser-based AM with necessary post-processing to produce metal parts with accuracy, surface integrity, and material properties. Commercially available hybrid AM systems are reviewed along with challenges and open issues in industrial adoption.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

The effect of the heat treatments on the tool wear of hybrid Additive Manufacturing of IN718

Francesco Careri et al.

Summary: The study demonstrates the presence of different tool wear mechanisms during the machining of DED IN718, which are correlated with cutting speed, feed rate, material conditions, and tool wear.

WEAR (2021)

添加到收藏夹

Article Mechanics

A feasibility study on additive manufactured hybrid metal/composite shock absorbers

V. Acanfora et al.

Summary: The research focuses on the feasibility and effectiveness of novel thin additive manufactured hybrid metal/composite lattice structures as lightweight shock absorbing devices. These hybrid structures combine an additive manufactured metal lattice core for energy absorption with a composite skin/cohesive coating for weight reduction, increased stiffness, and strength of the shock absorber. Extensive numerical analysis demonstrated the effectiveness of the proposed lightweight hybrid configuration compared to traditional shock absorbing panels in terms of mass reduction, mechanical, and energy absorption performances.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Application of an Additive Manufactured Hybrid Metal/Composite Shock Absorber Panel to a Military Seat Ejection System

Valerio Acanfora et al.

Summary: The study investigated the application of shock absorbing systems for aerospace applications developed through additive manufacturing. The innovative shock absorber concept with a thickness of only 6 mm and composed of a pyramid-shaped lattice core demonstrated the ability to absorb more than 60% of the energy generated during the explosion event. This system increased the total mass of the pilot-seat system by just 0.8%.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of Maraging Steel Produced Using Hybrid Additive/Subtractive Manufacturing

Sheida Sarafan et al.

Summary: The research explores hybrid manufacturing of 18Ni-300 maraging steel using the Matsuura LUMEX Avance-25 system, showcasing its capability for net-shape manufacturing. By integrating additive manufacturing with high-speed machining, the system can produce components at different power levels effectively and efficiently.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

Areal Surface Roughness Optimization of Maraging Steel Parts Produced by Hybrid Additive Manufacturing

Philipp Wuest et al.

MATERIALS (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Analysis of flat-end milling forces considering chip formation process in high-speed cutting of Ti6Al4V titanium alloy

Mehmet Aydin et al.

SIMULATION MODELLING PRACTICE AND THEORY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study on the effects of cold chamber die casting parameters on high-speed drilling machinability of casted AZ91 alloy

Sakir Yazman et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

Jinliang Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metallurgical aspects of steels designed to resist abrasion, and impact-abrasion wear

A. R. Chintha

MATERIALS SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components

Amir Mahyar Khorasani et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Milling of maraging steel components produced by selective laser melting

Alessandro Fortunato et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Correlation Between Machinability and Chip Morphology of Austempered Ductile Iron

S. Yazman et al.

JOURNAL OF TESTING AND EVALUATION (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Relationship Between Machinability, Microstructure, and Mechanical Properties of Al-7Si Alloy

Muhammet Uludag et al.

JOURNAL OF TESTING AND EVALUATION (2018)

添加到收藏夹

Article Engineering, Mechanical

Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts

G. Skordaris et al.

WEAR (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel

James Mutua et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy

Ahmed H. Maamoun et al.

MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations

Magdalena Cortina et al.

MATERIALS (2018)

添加到收藏夹

Article Automation & Control Systems

Quantitative analysis on crater wear of cemented carbide inserts when turning Ti-6Al-4V

Kai Wang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Automation & Control Systems

Study of hybrid additive manufacturing based on pulse laser wire depositing and milling

Zhi-peng Ye et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Review Engineering, Manufacturing

Tool wear and surface quality of metal matrix composites due to machining: A review

Ferial Hakami et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Dry machining: A step towards sustainable machining - Challenges and future directions

Gyanendra Singh Goindi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Built-up edge effects on process outputs of titanium alloy micro milling

Samad Nadimi Bavil Oliaei et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys

C. Ramirez et al.

WEAR (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Clasp fabrication using one-process molding by repeated laser sintering and high-speed milling

Toyoki Nakata et al.

JOURNAL OF PROSTHODONTIC RESEARCH (2017)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Titanium removable denture based on a one-metal rehabilitation concept

Chikahiro Ohkubo et al.

DENTAL MATERIALS JOURNAL (2017)

添加到收藏夹

Review Engineering, Multidisciplinary

Overhanging Features and the SLM/DMLS Residual Stresses Problem: Review and Future Research Need

Albert E. Patterson et al.

TECHNOLOGIES (2017)

添加到收藏夹

Article Automation & Control Systems

Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting

Guoqing Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Automation & Control Systems

Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)

Maciej Mazur et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of metals

Dirk Herzog et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Engineering, Industrial

Effect of structure and residual stresses of diamond coated cemented carbide tools on the film adhesion and developed wear mechanisms in milling

G. Skordaris et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid additive and subtractive machine tools - Research and industrial developments

Joseph M. Flynn et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Review Engineering, Industrial

The evolution and future of manufacturing: A review

Behzad Esmaeilian et al.

JOURNAL OF MANUFACTURING SYSTEMS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Built-up-edge effects on surface deterioration in micromilling processes

Z. Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2016)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Hybrid additive manufacturing technologies - An analysis regarding potentials and applications

Marion Merklein et al.

LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4

J. Kranz et al.

JOURNAL OF LASER APPLICATIONS (2015)

添加到收藏夹

Article Engineering, Mechanical

Analysis and optimisation of vertical surface roughness in micro selective laser melting

Eberhard Abele et al.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)

添加到收藏夹

Article Engineering, Industrial

Comparison of the machinabilities of Ti6Al4V and TIMETAL® 54M using uncoated WC-Co tools

M. Armendia et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Low cost integration of additive and subtractive processes for hybrid layered manufacturing

K. P. Karunakaran et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)

添加到收藏夹

Article Automation & Control Systems

Investigation on diffusion wear during high-speed machining Ti-6Al-4V alloy with straight tungsten carbide tools

S. Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills

T. Thepsonthi et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

添加到收藏夹

Article Engineering, Industrial

Metal direct prototyping by using hybrid plasma deposition and milling

Xinhong Xiong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling

K. A. Venugopal et al.

WEAR (2007)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling

NSK Reddy et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

添加到收藏夹

Article Engineering, Mechanical

Residual stresses in selective laser sintering and selective laser melting

Peter Mercelis et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

Article Engineering, Industrial

Optimal machining parameters selection in high speed milling of hardened steels for injection moulds

J Vivancos et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

添加到收藏夹

Article Engineering, Mechanical

Wear-mode mapping for the micro-scale abrasion test

K Adachi et al.

WEAR (2003)

添加到收藏夹

Article Engineering, Industrial

Wear patterns and mechanisms of cutting tools in high-speed face milling

ZQ Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

Article Engineering, Mechanical

Wear mechanisms of cutting tools in high-speed cutting processes

S Dolinsek et al.

WEAR (2001)

添加到收藏夹

Article Engineering, Biomedical

Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption

DD Deligianni et al.

BIOMATERIALS (2001)

添加到收藏夹

Article Materials Science, Coatings & Films

Increasing of cutting performance of PVD coated cemented carbide inserts in chipboard milling through improvement of the film adhesion, considering the coating cutting loads

KD Bouzakis et al.

SURFACE & COATINGS TECHNOLOGY (2000)

添加到收藏夹

Article Engineering, Industrial

High-speed machining of cast iron and alloy steels for die and mold manufacturing

P Fallböhmer et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.