相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。An Origami Continuum Robot Capable of Precise Motion Through Torsionally Stiff Body and Smooth Inverse Kinematics
Junius Santoso et al.
SOFT ROBOTICS (2021)
Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy factor and maximum buckling load capacity
Muhammad Imran et al.
DEFENCE TECHNOLOGY (2021)
Experimental and numerical study on free vibration characteristics of laminated composite plate with/without cut-out
Leena Sinha et al.
COMPOSITE STRUCTURES (2021)
Design optimization of a novel bio-inspired 3D porous structure for crashworthiness
Hanfeng Yin et al.
COMPOSITE STRUCTURES (2021)
Origami-inspired carbon fiber-reinforced composite sandwich materials - Fabrication and mechanical behavior
Yuntong Du et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Quasi-static in-plane compression of zig-zag folded metamaterials at large plastic strains
Jianjun Zhang et al.
THIN-WALLED STRUCTURES (2021)
Experimental study of the hysteretic behavior of energy dissipation braces based on Miura origami
Ya Zhou et al.
THIN-WALLED STRUCTURES (2021)
CFRP Origami Metamaterial with Tunable Buckling Loads: A Numerical Study
Houyao Zhu et al.
MATERIALS (2021)
Mechanical characterization of glass and jute fiber-based hybrid composites fabricated through compression molding technique
Muhammad Yasir Khalid et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)
Programmable and reprocessable multifunctional elastomeric sheets for soft origami robots
Shuo Zhang et al.
SCIENCE ROBOTICS (2021)
A nonlinear vibration isolator with quasi-zero-stiffness inspired by Miura-origami tube
Hesheng Han et al.
NONLINEAR DYNAMICS (2021)
Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs
Guilin Wen et al.
NONLINEAR DYNAMICS (2021)
Transparent origami glass
Yang Xu et al.
NATURE COMMUNICATIONS (2021)
Sound insulation properties of sandwich structure with hemispheric shell cores: Numerical and experimental studies
Guilin Wen et al.
APPLIED ACOUSTICS (2020)
A time-variant reliability analysis method for non-linear limit-state functions with the mixture of random and interval variables
Fangyi Li et al.
ENGINEERING STRUCTURES (2020)
Transient Dynamics of a Miura-Origami Tube during Free Deployment
Haiping Wu et al.
PHYSICAL REVIEW APPLIED (2020)
3D printed origami honeycombs with tailored out-of-plane energy absorption behavior
Scott Townsend et al.
MATERIALS & DESIGN (2020)
Origami spring-inspired metamaterials and robots: An attempt at fully programmable robotics
Fuwen Hu et al.
SCIENCE PROGRESS (2020)
Quasi-static and dynamic mechanical properties of Miura-ori metamaterials
Xinmei Xiang et al.
THIN-WALLED STRUCTURES (2020)
Finite element analysis of grinding process of long fiber reinforced ceramic matrix woven composites: Modeling, experimental verification and material removal mechanism
Yuguo Wang et al.
CERAMICS INTERNATIONAL (2019)
MR-Conditional SMA-Based Origami Joint
Austin J. Taylor et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)
Autonomous Deployment of a Solar Panel Using Elastic Origami and Distributed Shape-Memory-Polymer Actuators
Tian Chen et al.
PHYSICAL REVIEW APPLIED (2019)
Localized failure analysis of internally pressurized laminated ellipsoidal woven GFRP composite domes: Analytical, numerical, and experimental studies
Soheil Gohari et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Energy absorption behaviors of pre-folded composite tubes with the full-diamond origami patterns
Haitao Ye et al.
COMPOSITE STRUCTURES (2019)
Fabrication, dynamic properties and multi-objective optimization of a metal origami tube with Miura sheets
Jie Liu et al.
THIN-WALLED STRUCTURES (2019)
Invariant and smooth limit of discrete geometry folded from bistable origami leading to multistable metasurfaces
Ke Liu et al.
NATURE COMMUNICATIONS (2019)
Topological Design of a Lightweight Sandwich Aircraft Spoiler
Jie Liu et al.
MATERIALS (2019)
On sound insulation of pyramidal lattice sandwich structure
Jie Liu et al.
COMPOSITE STRUCTURES (2019)
Design, manufacturing and testing of re-configurable crawling modular robot inspired from origami
Satyanarayana S. Pillai et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018) (2019)
An origami-inspired structure with graded stiffness
Jiayao Ma et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Reconfigurable origami silencers for tunable and programmable sound attenuation
Hongbin Fang et al.
SMART MATERIALS AND STRUCTURES (2018)
Multi-objective optimization of multi-cell tubes with origami patterns for energy absorption
Kai Yang et al.
THIN-WALLED STRUCTURES (2018)
A Novel Design Framework for Structures/Materials with Enhanced Mechanical Performance
Jie Liu et al.
MATERIALS (2018)
Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation
Joanne Ee Mei Teoh et al.
MATERIALS (2018)
Design, fabrication and control of origami robots
Daniela Rus et al.
NATURE REVIEWS MATERIALS (2018)
Origami/Kirigami-Guided Morphing of Composite Sheets
Ianxun Cui et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Influence of Defects on Bending Properties of 2D-T700/E44 Composites Prepared by Improved Compression Molding Process
Yuqin Ma et al.
MATERIALS (2018)
Mechanical behaviour of a creased thin strip
Jie Liu et al.
MECHANICAL SCIENCES (2018)
To avoid unpractical optimal design without support
Jie Liu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
An Extended Family of Rigidly Foldable Origami Tubes
Yan Chen et al.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2017)
Layout optimization of continuum structures considering the probabilistic and fuzzy directional uncertainty of applied loads based on the cloud model
Jie Liu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2016)
Origami tubes with reconfigurable polygonal cross-sections
E. T. Filipov et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)
A three-dimensional actuated origami-inspired transformable metamaterial with multiple degrees of freedom
Johannes T. B. Overvelde et al.
NATURE COMMUNICATIONS (2016)
Folding to Curved Surfaces: A Generalized Design Method and Mechanics of Origami-based Cylindrical Structures
Fei Wang et al.
SCIENTIFIC REPORTS (2016)
Zigzag-base folded sheet cellular mechanical metamaterials
Maryam Eidini
EXTREME MECHANICS LETTERS (2016)
Deformation of the Miura-ori patterned sheet
Sicong Liu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability
H. Yasuda et al.
PHYSICAL REVIEW LETTERS (2015)
Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials
Evgueni T. Filipov et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Design of non-isomorphic symmetric descendants of the Miura-ori
Pooya Sareh et al.
SMART MATERIALS AND STRUCTURES (2015)
Unraveling metamaterial properties in zigzag-base folded sheets
Maryam Eidini et al.
SCIENCE ADVANCES (2015)
Manufacture of Arbitrary Cross-Section Composite Honeycomb Cores Based on Origami Techniques
Kazuya Saito et al.
JOURNAL OF MECHANICAL DESIGN (2014)
Origami interleaved tube cellular materials
Kenneth C. Cheung et al.
SMART MATERIALS AND STRUCTURES (2014)
Origami lithium-ion batteries
Zeming Song et al.
NATURE COMMUNICATIONS (2014)
Origami based Mechanical Metamaterials
Cheng Lv et al.
SCIENTIFIC REPORTS (2014)
Folding Paper-Based Lithium-Ion Batteries for Higher Areal Energy Densities
Qian Cheng et al.
NANO LETTERS (2013)
Topology optimization approaches A comparative review
Ole Sigmund et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2013)
Mechanical tests for foldcore base material properties
Sebastian Fischer et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil
K Kuribayashi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
分享论文
