相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effects of surface diffusion and solder volume on porous-type Cu3Sn in Cu/Sn/Cu microjoints
Y. W. Wang
MATERIALS CHEMISTRY AND PHYSICS (2022)
Effects of bismuth and nickel on the microstructure evolution of Sn-Ag-Cu (SAC)-based solders
Preeth Sivakumar et al.
MATERIALS TODAY COMMUNICATIONS (2021)
Effects of Surface Finish on Sn-3.0Ag-0.5Cu Solder Joint Microstructure and Strength
S. F. N. Muhd Amli et al.
JOURNAL OF ELECTRONIC MATERIALS (2021)
Microstructure and mechanical behavior of SnBi-xAg and SnBi-xAg@P-Cu solder joints during isothermal aging
Yang Liu et al.
MICROELECTRONICS RELIABILITY (2021)
Interfacial reaction and mechanical properties of Sn58Bi-XCr solder joints under isothermal aging conditions
Qianqian Song et al.
VACUUM (2021)
IMC microstructure modification and mechanical reinforcement of Sn-Ag-Cu/Cu microelectronic joints through an advanced surface finish technique
C. E. Ho et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Effect of Cu Content on Performance of Sn-Zn-Cu Lead-Free Solder Alloys Designed by Cluster-Plus-Glue-Atom Model
Jialong Qiu et al.
MATERIALS (2021)
Inhibiting effects of the Ni barrier layer on the growth of porous Cu3Sn in 10-μm microbumps
Siyan Liu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)
Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish
K. Vidyatharran et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
The effect of Bi on the microstructure, electrical, wettability and mechanical properties of Sn-0.7Cu-0.05Ni alloys for high strength soldering
M. I. I. Ramli et al.
MATERIALS & DESIGN (2020)
Effects of Surface Finish on the Shear Fatigue of SAC-Based Solder Alloys
Sinan Su et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)
Effect of Isothermal Aging and Copper Substrate Roughness on the SAC305 Solder Joint Intermetallic Layer Growth of High Temperature Storage (HTS)
Rabiah Al Adawiyah Ab Rahim et al.
SAINS MALAYSIANA (2020)
High stability and aging resistance Sn-1Ag-0.5Cu solder alloy by Fe and Bi minor alloying
M. H. Mandavifard et al.
MICROELECTRONIC ENGINEERING (2019)
The Role of Intermetallic Compounds in Controlling the Microstructural, Physical and Mechanical Properties of Cu-[Sn-Ag-Cu-Bi]-Cu Solder Joints
Reza Sayyadi et al.
SCIENTIFIC REPORTS (2019)
Aging resistance of the Sn-Ag-Cu solder joints doped with Mo nanoparticles
Linmei Yang et al.
MATERIALS LETTERS (2019)
Effect of Ni addition into the Cu substrate on the interfacial IMC growth during the liquid-state reaction with Sn-58Bi solder
Xiaowu Hu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Nickel effects on the structural and some physical properties of the eutectic Sn-Ag lead-free solder alloy
Mohammed S. Gumaan et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2019)
Critical Review of Size Effects on Microstructure and Mechanical Properties of Solder Joints for Electronic Packaging
Shaobin Wang et al.
APPLIED SCIENCES-BASEL (2019)
Effects of Solder Volume and Reflow Conditions on Self-Alignment Accuracy for Fan-Out Package Applications
Hwan-Pil Park et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Effect of Ni-P Plating Temperature on Growth of Interfacial Intermetallic Compound in Electroless Nickel Immersion Gold/Sn-Ag-Cu Solder Joints
Wonil Seo et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints
M. A. Rabiatul Adawiyah et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Morphological Evolution and Growth Kinetics of Interfacial Cu6Sn5 and Cu3Sn Layers in Low-Ag Sn-0.3Ag-0.7Cu-xMn/Cu Solder Joints During Isothermal Ageing
Y. Tang et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
Microstructural and mechanical behavior of SnCu-Ge solder alloy subjected to high temperature storage
M. Hasnine et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Solder paste volume effects on assembly yield and reliability for bottom terminated components
Sai Srinivas Sriperumbudur et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2017)
Packaging Reliability Effect of ENIG and ENEPIG Surface Finishes in Board Level Thermal Test under Long-Term Aging and Cycling
Chaobo Shen et al.
MATERIALS (2017)
Controlling Bulk Cu6Sn5 Nucleation in Sn0.7Cu/Cu Joints with Al Micro-alloying
J. W. Xian et al.
JOURNAL OF ELECTRONIC MATERIALS (2016)
Effect of Ni on the Formation and Growth of Primary Cu6Sn5 Intermetallics in Sn-0.7 wt.%Cu Solder Pastes on Cu Substrates During the Soldering Process
M. A. A. Mohd Salleh et al.
JOURNAL OF ELECTRONIC MATERIALS (2016)
The influence of ageing on the stabilisation of interfacial (Cu,Ni)6(Sn,Zn)5 and (Cu,Au,Ni)6Sn5 intermetallics in Pb-free Ball Grid Array (BGA) solder joints
Guang Zeng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of indium on the intermetallic layer between low-Ag SAC0307-xIn lead-free solders and Cu substrate
Kannachai Kanlayasiri et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The influence of Ni and Zn additions on microstructure and phase transformations in Sn-0.7Cu/Cu solder joints
Guang Zeng et al.
ACTA MATERIALIA (2015)
Growth behavior of Cu6Sn5 in Sn-6.5 Cu solders under DC considering trace Al: In situ observation
Tongmin Wang et al.
INTERMETALLICS (2015)
Microstructural discovery of Al addition on Sn-0.5Cu-based Pb-free solder design
Jahyun Koo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Heterogeneous nucleation of Cu6Sn5 in Sn-Cu-Al solders
J. W. Xian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Developments of high strength Bi-containing Sn0.7Cu lead-free solder alloys prepared by directional solidification
Xiaowu Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Nucleation and Growth of Cu-Al Intermetallics in Al-Modified Sn-Cu and Sn-Ag-Cu Lead-Free Solder Alloys
Kathlene N. Reeve et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Indium, chromium and nickel-modified eutectic Sn-0.7 wt% Cu lead-free solder rapidly solidified from molten state
Rizk Mostafa Shalaby
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)
Microstructure, interfacial IMC and mechanical properties of Sn-0.7Cu-xAl (x=0-0.075) lead-free solder alloy
Li Yang et al.
MATERIALS & DESIGN (2015)
Effect of aluminum concentration on the microstructure and mechanical properties of Sn-Cu-Al solder alloy
Li Yang et al.
MICROELECTRONICS RELIABILITY (2015)
The effect of iron and bismuth addition on the microstructural, mechanical, and thermal properties of Sn-1Ag-0.5Cu solder alloy
M. H. Mandavifard et al.
MICROELECTRONICS RELIABILITY (2015)
Properties and Microstructures of Sn-Ag-Cu-X Lead-Free Solder Joints in Electronic Packaging
Lei Sun et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)
INVESTIGATION OF INTERMETALLIC COMPOUNDS IN Sn-Cu-Ni LEAD-FREE SOLDERS
E. Nagy et al.
ARCHIVES OF METALLURGY AND MATERIALS (2015)
Liquid-state and solid-state interfacial reactions between Sn-Ag-Cu-Fe composite solders and Cu substrate
Xiaoying Liu et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2014)
Influence of TiO2 nanoparticles on IMC growth in Sn-3.0Ag-0.5Cu-xTiO2 solder joints during isothermal aging process
Y. Tang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2014)
Effects of Ga addition on microstructure and properties of Sn-0.5Ag-0.7Cu solder
Dong-xue Luo et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2014)
Effects of indium addition on properties and wettability of Sn-0.7Cu-0.2Ni lead-free solders
L. F. Li et al.
MATERIALS & DESIGN (2014)
Solidification of Sn-0.7Cu-0.15Zn Solder: In Situ Observation
Guang Zeng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
A review: On the development of low melting temperature Pb-free solders
Hiren R. Kotadia et al.
MICROELECTRONICS RELIABILITY (2014)
Solid state interaction between a Sn-Ag-Cu-In solder alloy and Cu substrate
Charles Lejuste et al.
INTERMETALLICS (2013)
Influence of Composition on the Morphology of Primary Cu6Sn5 in Sn-4Cu Alloys
Stuart McDonald et al.
JOURNAL OF ELECTRONIC MATERIALS (2013)
Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni
Bismarck Luiz Silva et al.
JOURNAL OF ELECTRONIC MATERIALS (2013)
Effects of reflow on the interfacial characteristics between Zn nanoparticles containing Sn-3.8Ag-0.7Cu solder and copper substrate
Y. H. Chan et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2013)
Solder Volume Effect on Interfacial Reaction between Sn-3.0Ag-0.5Cu Solder Balls and Cu Substrates - Experiment & Simulation
Mingliang Huang et al.
CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE 2013 (CSTIC 2013) (2013)
Interface reaction between SnAgCu/SnAgCuCe solders and Cu substrate subjected to thermal cycling and isothermal aging
Liang Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effect of Pd Thickness on the Interfacial Reaction and Shear Strength in Solder Joints Between Sn-3.0Ag-0.5Cu Solder and Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Surface Finish
Young Min Kim et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Evolution of Intermetallic Compounds between Sn-0.3Ag-0.7Cu Low-silver Lead-free Solder and Cu Substrate during Thermal Aging
Niwat Mookam et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Effect of Zn on properties and microstructure of SnAgCu alloy
Liang Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2012)
Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds
A. S. M. A. Haseeb et al.
MATERIALS CHARACTERIZATION (2012)
Interfacial IMC layer growth and tensile properties of low-silver Cu/SACBE/Cu solder joints
Wenzhen Bi et al.
SOLDERING & SURFACE MOUNT TECHNOLOGY (2012)
Effects of Ni additions, trace elements and solidification kinetics on microstructure formation in Sn-0.7Cu solder
Tina Ventura et al.
ACTA MATERIALIA (2011)
Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing
A. S. M. A. Haseeb et al.
INTERMETALLICS (2011)
Interfacial reactions and mechanical properties between Sn-4.0Ag-0.5Cu and Sn-4.0Ag-0.5Cu-0.05Ni-0.01Ge lead-free solders with the Au/Ni/Cu substrate
Yee-Wen Yen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Kinetics of intermetallic phase formation at the interface of Sn-Ag-Cu-X (X = Bi, In) solders with Cu substrate
Erika Hodulova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Effects of Processing and Amount of Co Addition on Shear Strength and Microstructual Development in the Sn-3.0Ag-0.5Cu Solder Joint
Limin Ma et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Comparative Study of ENIG and ENEPIG as Surface Finishes for a Sn-Ag-Cu Solder Joint
Jeong-Won Yoon et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Effect of Pd Addition in ENIG Surface Finish on Drop Reliability of Sn-Ag-Cu Solder Joint
Sang-Su Ha et al.
MATERIALS TRANSACTIONS (2011)
Effects of Ni addition on the interfacial reactions between Sn-Cu solders and Ni substrate
Chao-hong Wang et al.
INTERMETALLICS (2010)
Stabilisation of Cu6Sn5 by Ni in Sn-0.7Cu-0.05Ni lead-free solder alloys
Kazuhiro Nogita
INTERMETALLICS (2010)
Effect of phosphorus element on the comprehensive properties of Sn-Cu lead-free solder
Guangdong Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering
C. C. Chang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of third element and surface finish on interfacial reactions of Sn-Ag-xCu (or Ni)/(Cu or ENIG) solder joints
Jeong-Won Yoon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effect of Cu concentration, solder volume, and temperature on the reaction between SnAgCu solders and Ni
S. C. Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of trace rare earth Nd addition on microstructure and properties of SnAgCu solder
Lili Gao et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2010)
A review on the interfacial intermetallic compounds between Sn-Ag-Cu based solders and substrates
Guang Zeng et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2010)
Evolutions of the interface and shear strength between SnAgCu-xNi solder and Cu substrate during isothermal aging at 150°C
Ping Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of minor Fe, Co, and Ni additions on the reaction between SnAgCu solder and Cu
Y. W. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
The Effects of Solid-State Aging on the Intermetallic Compounds of Sn-Ag-Bi-In Solders on Cu Substrates
Albert T. Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
Effect of surface finish on interfacial reactions of Cu/Sn-Ag-Cu/Cu(ENIG) sandwich solder joints
Jeong-Won Yoon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu-xNi composite solder joints on electrolytic Ni/Au metallized substrate
Pei Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Effects of trace amounts of rare earth additions on microstructure and properties of Sn-Bi-based solder alloy
Wenxing Dong et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Effect of Zn addition on interfacial reactions between Sn-4Ag solder and Ag substrates
H. F. Zou et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Nickel-stabilized hexagonal (Cu, Ni)6Sn5 in Sn-Cu-Ni lead-free solder alloys
Kazuhiro Nogita et al.
SCRIPTA MATERIALIA (2008)
Morphology and pull strength of Sn-Ag(-Co) solder joint with copper pad
Hiroshi Nishikawa et al.
JOURNAL OF ELECTRONIC MATERIALS (2007)
Effect of adding 0.3 wt% Ni into the Sn-0.7 wt% Cu solder Part II. Growth of intermetallic layer with Cu during wetting and aging
M. J. Rizvi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Microstructure and mechanical behavior of novel rare earth-containing Pb-free solders
M. A. Dudek et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Intermetallic compound formation in Sn-Co-Cu, Sn-Ag-Cu and eutectic Sn-Cu solder joints on electroless Ni(P) immersion Au surface finish after reflow soldering
Peng Sun et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2006)
A rheological assessment of the effect of trace level Ni additions on the solidification of Sn-0.7Cu
CM Gourlay et al.
SCRIPTA MATERIALIA (2006)
Intermetallic formation in Sn3Ag0.5Cu and Sn3Ag0.5Cu0.06Ni0.01Ge solder BGA packages with immersion Ag surface finish
TH Chuang et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effect of adding 1 wt% Bi into the Sn-2.8Ag-0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging
MJ Rizvi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Microstructure control in Sn-0.7 mass % Cu alloys
K Nogita et al.
MATERIALS TRANSACTIONS (2005)
Improvement of microstructure and interface structure of eutectic Sn-0.7Cu solder with small amount of Zn addition
FJ Wang et al.
SCRIPTA MATERIALIA (2005)
Interfacial reaction and mechanical properties of eutectic Sn-0.7Cu/Ni BGA solder joints during isothermal long-term aging
JW Yoon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Interfacial reactions between lead-free solders and common base materials
T Laurila et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Properties of lead-free solder alloys with rare earth element additions
CML Wu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Effect of reflow time on interfacial reaction and shear strength of Sn-0.7Cu solder/Cu and electroless Ni-P BGA joints
JW Yoon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Microstructure and mechanical properties of new lead-free Sn-Cu-RE solder alloys
CML Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2002)
Effect of La on the Cu-Sn intermetallic compound (IMC) growth and solder joint reliability
X Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
分享论文
