相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Prediction of the cohesive strength for simulating composite delamination by a micro-mechanical model based on random RVE
Chen Fu et al.
COMPOSITE STRUCTURES (2021)
Mode I and II interlaminar critical energy release rates in all-carbon interlayer unidirectional fibre-hybrids based on ultrahigh-modulus and high-strength fibres
Sergei B. Sapozhnikov et al.
COMPOSITE STRUCTURES (2020)
Experimental and numerical investigation of the mixed mode delamination of monolithic laminates exhibiting severe fiber bridging
Daniel Hoewer et al.
COMPOSITE STRUCTURES (2020)
A simple procedure for determining the mode I bridging stress of composite DCB laminates without measuring the crack opening displacement
Yu Gong et al.
COMPOSITE STRUCTURES (2020)
A novel four-linear cohesive law for the delamination simulation in composite DCB laminates
Shihao Yin et al.
COMPOSITES PART B-ENGINEERING (2020)
Determination of the bridging law for mode I delamination via elastic restraint beam model and equivalent crack method
Weiling Liu et al.
ENGINEERING FRACTURE MECHANICS (2020)
Towards a geometry independent traction-separation and angle relation due to large scale bridging in DCB configuration
Georgios A. Pappas et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
An enhanced beam theory based semi -analytical method to determine the DCB mode I bridging -traction law
Tiancheng Cao et al.
COMPOSITE STRUCTURES (2020)
A modified mode I cohesive zone model for the delamination growth in DCB laminates with the effect of fiber bridging
Yu Gong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Determination of the bridging law for mixed-mode I/II delamination without measuring the crack length and crack relative displacements
Weiling Liu et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure
F. Naya et al.
COMPOSITE STRUCTURES (2019)
Formulation of a mixed-mode multilinear cohesive zone law in an interface finite element for modelling delamination with R-curve effects
S. M. Jensen et al.
COMPOSITE STRUCTURES (2019)
Influence of ply-angle on fracture in antisymmetric interfaces of CFRP laminates
C. Blondeau et al.
COMPOSITE STRUCTURES (2019)
Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading
Zahra Daneshjoo et al.
ENGINEERING FRACTURE MECHANICS (2019)
Experimental characterization of delamination in off-axis GFRP laminates during mode I loading
Esben Lindgaard et al.
COMPOSITE STRUCTURES (2019)
Inverse parameter identification of n-segmented multilinear cohesive laws using parametric finite element modeling
S. M. Jensen et al.
COMPOSITE STRUCTURES (2019)
Fiber bridging in composite laminates: A literature review
Rafiullah Khan
COMPOSITE STRUCTURES (2019)
Characterisation and analysis of transverse crack-induced delamination in cross-ply composite laminates under fatigue loadings
Paolo Andrea Carraro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Relevance of 3D simulations and sandwich core topology for the modeling of honeycomb core sandwich panels undergoing interfacial crack propagation
Daniel Hoewer et al.
COMPOSITE STRUCTURES (2018)
An improved power law criterion for the delamination propagation with the effect of large-scale fiber bridging in composite multidirectional laminates
Yu Gong et al.
COMPOSITE STRUCTURES (2018)
Cohesive zone modeling for mode I facesheet to core delamination of sandwich panels accounting for fiber bridging
Daniel Hoewer et al.
COMPOSITE STRUCTURES (2018)
A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws
M. Herraez et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects
Z. Daneshjoo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Dependency of bridging traction of DCB composite specimen on interface fiber angle
M. M. Shokrieh et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading
Libin Zhao et al.
COMPOSITES PART B-ENGINEERING (2017)
A novel procedure to determine the cohesive law in DCB tests
Ainhoa Arrese et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminates
Yu Gong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Delamination onset in symmetric cross-ply laminates under static loads: Theory, numerics and experiments
Paolo Andrea Carraro et al.
COMPOSITE STRUCTURES (2017)
An efficient method for fiber bridging traction identification based on the R-curve: Formulation and experimental validation
G. Frossard et al.
COMPOSITE STRUCTURES (2017)
On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated composites
M. M. Shokrieh et al.
COMPOSITE STRUCTURES (2017)
A multi-scale based cohesive zone model for the analysis of thickness scaling effect in fiber bridging
Luis P. Canal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Characterization of intralaminar mode I fracture of AS4/PPS composite using inverse identification and micromechanics
G. Pappas et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness
G. Frossard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach
L. P. Canal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Intralaminar fracture of unidirectional carbon/epoxy composite: experimental results and numerical analysis
G. Pappas et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
A modified model for simulation of mode I delamination growth in laminated composite materials
M. M. Shokrieh et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Bilinear approximations to the mixed-mode I-II delamination cohesive law using an inverse method
A. B. de Morais et al.
COMPOSITE STRUCTURES (2015)
Delamination in cross-ply laminates: Identification of traction-separation relations and cohesive zone modeling
E. Farmand-Ashtiani et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite
E. Farmand-Ashtiani et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements
Libin Zhao et al.
COMPOSITE STRUCTURES (2014)
Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2013)
Identification of material parameters for modelling delamination in the presence of fibre bridging
Alessandro Airoldi et al.
COMPOSITE STRUCTURES (2012)
Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates
T. A. Sebaey et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Delamination R-curve as a material property of unidirectional glass/epoxy composites
M. M. Shokrieh et al.
MATERIALS & DESIGN (2012)
Bilinear approximations to the mode II delamination cohesive law using an inverse method
N. Dourado et al.
MECHANICS OF MATERIALS (2012)
Effect of stacking sequence on R-curve behavior of glass/epoxy DCB laminates with 0°//0° crack interface
M. M. Shokrieh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites
Carlos G. Davila et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Bridging tractions in mode I delamination: Measurements and simulations
L. Sorensen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Micromechanical model of cross-over fibre bridging - Prediction of mixed mode bridging laws
Bent F. Sorensen et al.
MECHANICS OF MATERIALS (2008)
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
A. Turon et al.
ENGINEERING FRACTURE MECHANICS (2007)
A damage model for the simulation of delamination in advanced composites under variable-mode loading
A. Turon et al.
MECHANICS OF MATERIALS (2006)
Determination of mixed mode cohesive laws
Bent F. Sorensen et al.
ENGINEERING FRACTURE MECHANICS (2006)
DCB-specimen loaded with uneven bending moments
Bent F. Sorensen et al.
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Numerical simulation of mixed-mode progressive delamination in composite materials
PP Camanho et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Mode-I interlaminar fracture of carbon/epoxy cross-ply composites
AB de Morais et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens
V Tamuzs et al.
ENGINEERING FRACTURE MECHANICS (2001)
分享论文
