4.7 Article

Corrosion protection coatings embedded with silane-functionalized rGO/SiO2 nanocontainers: Enhancing dispersive and corrosion-inhibitor loading capabilities

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Development of an active/barrier bi-functional anti-corrosion system based on the epoxy nanocomposite loaded with highly-coordinated functionalized zirconium-based nanoporous metal-organic framework (Zr-MOF)

Mohammad Ramezanzadeh et al.

Summary: In this study, Zr-MOFs particles functionalized with Glycidyl Methacrylate were used as novel anti-corrosive fillers for the first time, showing high functionality and excellent thermal stability. The Zr-MOFs exhibited excellent inhibition properties in saline solutions at different pH levels.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Thermodynamics

Application of dehumidification as anti-corrosion technology on suspension bridges: A review

Muxing Zhang et al.

Summary: The study highlights the importance of main cable dehumidification in mitigating metal corrosion of main cables on suspension bridges, with successful implementations on 47 bridges. It discusses crucial limitations and adaptations of various dehumidification methods, as well as technical suggestions for system design to effectively reduce corrosion.

APPLIED THERMAL ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Application of nanoporous cobalt-based ZIF-67 metal-organic framework (MOF) for construction of an epoxy-composite coating with superior anti-corrosion properties

Seyed Mohammad Lashgari et al.

Summary: The study demonstrated for the first time the synthesis and use of ZIF-67 NPs as a corrosion inhibitor container to enhance the barrier/active corrosion protection features of epoxy coatings. The active corrosion inhibition effect of the epoxy/ZIF-67@APS NPs was proven through electrochemical achievements.

CORROSION SCIENCE (2021)

Article Chemistry, Physical

Multilayer structural epoxy composite coating towards long-term corrosion/wear protection

Shijie Song et al.

Summary: The multifunctional epoxy composite coating with multilayer structure, constructed by layer-by-layer assembly method, shows improved impedance value, long-term chlorine resistance, reduced wear rate, and enhanced UV aging resistance.

CARBON (2021)

Review Engineering, Environmental

Ionic liquids as green and sustainable steel corrosion inhibitors: Recent developments

Yaroslav L. Kobzar et al.

Summary: This article highlights the importance of ionic liquids as steel corrosion inhibitors and emphasizes the necessity of developing green inhibitors. It also discusses the wide application of ionic liquids in corrosion prevention.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Volcano-like hierarchical superhydrophobic surface synthesized via facile one-step secondary anodic oxidation

Xinwen Zhang et al.

Summary: A facile one-step method was proposed to fabricate superhydrophobic surfaces with controllable roughness through secondary anodic oxidation (SAO) process, resulting in volcano-like hierarchical microstructures on anodic aluminum oxide (AAO).

APPLIED SURFACE SCIENCE (2021)

Article Food Science & Technology

Characterization of Rosewood and Cinnamon Cassia essential oil polymeric capsules: Stability, loading efficiency, release rate and antimicrobial properties

Rennan Felix da Silva Barbosa et al.

Summary: In this study, Rosewood and Cinnamon essential oils were successfully encapsulated using Tween 80 and PBAT as wall material, and evaluated through various tests. The nature of the essential oils was found to significantly impact the stability and loading efficiency of the capsules, while the release mechanism followed Fickian diffusion. Additionally, the capsules showed promising antimicrobial activity against various microorganisms.

FOOD CONTROL (2021)

Article Materials Science, Multidisciplinary

Microstructure and corrosion characterization of a Ti-30Zr alloy with Ta additions processed by arc-melting for biomedical applications

J. Chavez et al.

Summary: The study showed that Ti-30Zr-xTa alloys exhibit better corrosion resistance and microhardness compared to Ti-30Zr alloy, especially for the sample with 3 at.% Ta addition.

MATERIALS LETTERS (2021)

Article Chemistry, Physical

Influence of active nanofiller ZIF-8 metal-organic framework (MOF) by microemulsion method on anticorrosion of epoxy coatings

Song Duan et al.

Summary: The study demonstrated that increasing the mass fraction of ZIF-8 fillers in the modified epoxy coating improved the anticorrosion performance, as well as enhanced tensile strength and friction properties, mainly through chemical cross-linking.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Multidisciplinary

Preparation of highly efficient self-healing anticorrosion epoxy coating by integration of benzotriazole corrosion inhibitor loaded 2D-COF

Tengfei Liu et al.

Summary: A self-healing epoxy coating was developed by loading a corrosion inhibitor into a two-dimensional covalent organic framework nanocontainer. The controlled release of the inhibitor and good dispersion in the coating contributed to the excellent corrosion resistance performance demonstrated in electrochemical tests.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

Top of the line corrosion: causes, mechanisms, and mitigation using corrosion inhibitors

Aisha H. Al-Moubaraki et al.

Summary: Top of the line corrosion (TLC) is a significant issue in the oil and gas extraction industry, leading to accelerated corrosion rates and catastrophic failures in pipelines. The use of corrosion inhibitors is a key method for TLC mitigation, but there is limited literature available on this topic.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Article Engineering, Chemical

The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating

Onur Guler et al.

Summary: In this study, novel copper based functionally graded electrical contact materials were fabricated using hot pressing technique, with the addition of silver, nickel and chrome plated copper core particles. The wear and arc-erosion performances of the developed materials were significantly improved compared to pure copper, with wear mechanism dominated by abrasive wear for the functionally graded materials including electroless nickel and chromium coating layer.

ADVANCED POWDER TECHNOLOGY (2021)

Article Chemistry, Physical

Nickel interlayer enables indirect corrosion protection of magnesium alloy by photoelectrochemical cathodic protection

Guang-Ling Yang et al.

Summary: This study introduces a new photoelectrochemical cathodic protection technology that can indirectly protect metals with low corrosion potential by introducing an interlayer with high corrosion potential between the substrate and semiconductor. This methodology, demonstrated on a magnesium alloy, is not limited to specific metals and has the potential to be applied to other structural metals with low corrosion potential.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Improving the corrosion protection of 2524-T3-Al alloy through reactive sputtering Nb2O5 coatings

J. A. Moreto et al.

Summary: This study focused on surface modification of 2524-T3 Al alloy substrates using niobium oxide films produced by reactive sputtering. The Nb2O5 coating was found to delay corrosion onset and significantly improve corrosion resistance of the alloy. Additionally, it was observed that the Nb2O5 coating could enhance the wear resistance of the alloy.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

The role of embedded 2-ABT@Cu-BTC MOF on the anti-corrosion performance of electro-assisted deposited silica sol-gel composite film

Zahra Mohammadpour et al.

Summary: Composite coatings of silica sol-gel reinforced with metal-organic frameworks were formed using electro-assisted sol-gel method, with the encapsulation of corrosion inhibitor effectively protecting the coating against corrosion and releasing 40% of the inhibitor within 24 hours.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Materials Science, Multidisciplinary

Corrosion behavior of a slippery liquid infused porous surface on anodized stainless steel

Lucia Helena Prado et al.

Summary: This study demonstrates the fabrication of SLIPS coating for anodized stainless steel AISI 316L, which effectively protects the material from corrosion and exhibits self-healing properties.

MATERIALS LETTERS (2021)

Article Materials Science, Coatings & Films

Effect of cerium-based conversion coating on corrosion behavior of squeeze cast Mg-4 wt% Y alloy in 0.1 M NaCl solution

Meeta Ashok Kamde et al.

Summary: The use of cerium-based conversion coating has been shown to effectively improve the corrosion resistance of squeeze-cast Mg-4wt%Y alloy in a salt solution, with significant reduction in corrosion rate observed compared to the base alloy. The corrosion mechanism predominantly involves pitting corrosion around the second phase due to micro-galvanic coupling between alpha-Mg phase and Mg24Y5 precipitates.

SURFACE & COATINGS TECHNOLOGY (2021)

Review Chemistry, Physical

Downhole corrosion inhibitors for oil and gas production - a review

M. Askari et al.

Summary: This review article provides structured guidelines on the selection of corrosion inhibitors for broad applications in downhole for oil and gas wells. It evaluates the corrosion mechanisms, control methods, and injection methods of corrosion inhibitors. Through a comprehensive classification and assessment, it discusses the different types of downhole corrosion inhibitors.

APPLIED SURFACE SCIENCE ADVANCES (2021)

Article Biophysics

Drug-templated mesoporous silica nanocontainers with extra high payload and controlled release rate

O. V. Dement'eva et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2020)

Article Materials Science, Multidisciplinary

Coatings embedded with GO/MOFs nanocontainers having both active and passive protecting properties

Yue Zhao et al.

CORROSION SCIENCE (2020)

Article Chemistry, Physical

Self-healing system adapted to different pH environments for active corrosion protection of magnesium alloy

Dashuai Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Electrochemical behavior of hydroxypropyl methylcellulose acetate succinate as novel biopolymeric anticorrosion coating

Shih-Chen Shi et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Chemistry, Applied

Preparation of Ce-MOF@TEOS to enhance the anti-corrosion properties of epoxy coatings

Kunyao Cao et al.

PROGRESS IN ORGANIC COATINGS (2019)

Article Materials Science, Coatings & Films

The hot corrosion resistance of hot-dip aluminized low carbon steel with nickel interlayer under static load

Huan-Chang Liang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Review Chemistry, Physical

Recent progress and perspective on lithium metal anode protection

Huijun Yang et al.

ENERGY STORAGE MATERIALS (2018)

Review Chemistry, Physical

Corrosion inhibitors for ferrous and non-ferrous metals and alloys in ionic sodium chloride solutions: A review

Chandrabhan Verma et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Article Engineering, Manufacturing

Enhanced dielectric performance of polyimide composites with modified sandwich-like SiO2@GO hybrids

Leipeng Liu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Engineering, Environmental

An intelligent coating doped with inhibitor-encapsulated nanocontainers for corrosion protection of pipeline steel

Yuanchao Feng et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Engineering, Marine

Cathodic protection criteria of ship hull steel under flow condition in seawater

Jin-Ho Kim et al.

OCEAN ENGINEERING (2016)

Article Materials Science, Multidisciplinary

Corrosion and cathodic protection of carbon steel in the tidal zone: Products, mechanisms and kinetics

Ph. Refait et al.

CORROSION SCIENCE (2015)

Article Engineering, Electrical & Electronic

Copper wire bonding package decapsulation using the anodic protection method

Hirohiko Endoh et al.

MICROELECTRONICS RELIABILITY (2015)

Article Chemistry, Multidisciplinary

Silica self-assembly and the synthesis of microporous and mesoporous silicates

JD Rimer et al.

CHEMISTRY-A EUROPEAN JOURNAL (2006)