相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Improving the tribological properties of radial shaft seal countersurfaces using experimental micro peening and classical shot peening processes
Stefan Thielen et al.
TRIBOLOGY INTERNATIONAL (2021)
Effect of shot peening intensity on surface integrity of 18CrNiMo7-6 steel
Jizhan Wu et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Effect of different shot peening conditions on the fatigue life of 300 M steel submitted to high stress amplitudes
Amrita Bag et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Multi-objective optimization of high power diode laser surface hardening process of AISI 410 by means of RSM and desirability approach
Mahmoud Moradi et al.
OPTIK (2020)
Effect of siliconizing with molten salt on the wear resistance and corrosion resistance of AISI 302 stainless steel
Juanqin Xue et al.
SURFACE & COATINGS TECHNOLOGY (2020)
On the PEO treatment of cold sprayed 7075 aluminum alloy and its effects on mechanical, corrosion and dry sliding wear performances thereof
Yuqin Rao et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Modified wear behavior of selective laser melted Ti6Al4V alloy by direct current assisted ultrasonic surface rolling process
Zhen Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel
Yalong Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of shot peening coverage on residual stress and surface roughness of 18CrNiMo7-6 steel
Jizhan Wu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Statistical modelling and optimization of microhardness transition through depth of laser surface hardened AISI 1045 carbon steel
Changrong Chen et al.
OPTICS AND LASER TECHNOLOGY (2020)
Effects of Ni25 transitional layer on microstructural evolution and wear property of laser clad composite coating on H13 tool steel
K. N. Xue et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of laser re-melting on electric current assistive sintered CoCrFeNiAlxTiy high entropy alloys: Formation, micro-hardness and wear behaviors
Azmi Erdogan et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening
Huabing Liu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Investigation on the rolling wear and damage properties of laser dispersed quenched rail materials treated with different ratios
C. R. Su et al.
TRIBOLOGY INTERNATIONAL (2019)
Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures
Ali Algahtani et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Experimental and Numerical Study of AISI 4130 Steel Surface Hardening by Pulsed Nd:YAG Laser
Giuseppe Casalino et al.
MATERIALS (2019)
Influence of laser parameters on graphite morphology in the bonding zone and process optimization in gray cast iron laser cladding
Peng Yi et al.
OPTICS AND LASER TECHNOLOGY (2019)
Localized corrosion behaviour of AA7150 after ultrasonic shot peening: Corrosion depth vs. impact energy
Qingqing Sun et al.
CORROSION SCIENCE (2018)
Fatigue behavior prediction and analysis of shot peened mild carbon steels
Erfan Maleki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Investigation on microstructure and properties of electrodeposited Ni-Ti-CeO2 composite coating
Lianbo Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Behaviors of 40Cr steel treated by laser quenching on impact abrasive wear
Zhikai Chen et al.
OPTICS AND LASER TECHNOLOGY (2018)
Research on the transformation mechanism of graphite phase and microstructure in the heated region of gray cast iron by laser cladding
Yancong Liu et al.
OPTICS AND LASER TECHNOLOGY (2018)
Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process
Ming Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Mechanical properties and rolling-sliding wear performance of dual phase austempered ductile iron as potential metro wheel material
Hua Zhang et al.
WEAR (2018)
Experimental Study of Surface Hardening of AISI 420 Martensitic Stainless Steel Using High Power Diode Laser
Mahmoud Moradi et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Laser shock peening induced fatigue crack retardation in Ti-17 titanium alloy
Rujian Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of a hybrid treatment consisting of fine particle bombardment and powder impact plating on the scuffing behavior of ductile cast iron
Dongfang Zeng et al.
WEAR (2017)
On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature
M. Novelli et al.
APPLIED SURFACE SCIENCE (2016)
A complete residual stress model for laser surface hardening of complex medium carbon steel components
Erica Liverani et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Numerical/experimental analysis of the laser surface hardening with overlapped tracks to design the configuration of the process for Cr-Mo steels
Francisco Cordovilla et al.
MATERIALS & DESIGN (2016)
Surface severe plastic deformation of AISI 304 via conventional shot peening, severe shot peening and repeening
Okan Unal et al.
APPLIED SURFACE SCIENCE (2015)
Surface properties of low alloy steel treated by plasma nitrocarburizing prior to laser quenching process
Y. X. Wang et al.
OPTICS AND LASER TECHNOLOGY (2015)
Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions
Slobodan Mitrovic et al.
APPLIED SURFACE SCIENCE (2014)
Influence of severe shot peening on wear behaviour of an aluminium alloy
M. Palacios et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2014)
Residual stress redistribution in shot peened samples subject to mechanical loading
Dennis J. Buchanan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Numerical and experimental analysis of surface roughness generated by shot peening
Sara Bagherifard et al.
APPLIED SURFACE SCIENCE (2012)
Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching
Zhaoyun Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Surface Layer Characteristics of S30432 Austenite Stainless Steel after Shot Peening
K. Zhan et al.
MATERIALS TRANSACTIONS (2012)
Thermal relaxation behavior of residual stress in laser hardened 17-4PH steel after shot peening treatment
Zhou Wang et al.
APPLIED SURFACE SCIENCE (2011)
Effect of laser surface hardening on the microstructure, hardness and residual stresses of austempered ductile iron grades
C. Soriano et al.
APPLIED SURFACE SCIENCE (2011)
The wear and corrosion resistance of shot peened-nitrided 316L austenitic stainless steel
B. Hashemi et al.
MATERIALS & DESIGN (2011)
Influence of overlapping ratio on hardness and residual stress distributions in multi-track laser surface melting roller steel
Chaowen Li et al.
OPTICS AND LASERS IN ENGINEERING (2010)
Study on the softening in overlapping zone by laser-overlapping scanning surface hardening for carbon and alloyed steel
Chengwu Yao et al.
OPTICS AND LASERS IN ENGINEERING (2010)
Sliding wear behavior of a ferritic-pearlitic ductile cast iron with different nodule count
H. R. Abedi et al.
WEAR (2010)
Effect of medium on friction and wear properties of compacted graphite cast iron processed by biomimetic coupling laser remelting process
Qing-Chun Guo et al.
APPLIED SURFACE SCIENCE (2009)
Microstructure and erosion resistance enhancement of nodular cast iron by laser melting
K. F. Alabeedi et al.
WEAR (2009)
3D Modelling of Laser Hardening and Tempering of Hypo-eutectoid Steels
Giovanni Tani et al.
JOURNAL OF LASER MICRO NANOENGINEERING (2008)
Influence of cyclic temperature changes on the microstructure of AISI 4140 after laser surface hardening
T. Miokovic et al.
ACTA MATERIALIA (2007)
High temperature abrasive wear behavior of an as-cast ductile iron
O Celik et al.
WEAR (2005)
The advances and characteristics of high-power diode laser materials processing
L Li
OPTICS AND LASERS IN ENGINEERING (2000)