☆ 4.2 Article

Analytical Modeling of Wax Plug Transportation during Pipeline Pigging Using a Foam Pig

SPE PRODUCTION & OPERATIONS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Wax deposition using a cold rotating finger: An empirical and theoretical assessment in thermally driven and sloughing regimes

Ghinwa Yaghy et al.

Summary: Time-dependent wax deposition was investigated using a Cold Rotating Finger (CRF), revealing that deposition rates and mass values were influenced by the rotational speed. A diffusive model considering fluid motion described the reduced wax deposit at low rotational speeds, while a modified molecular diffusion model was needed for high speeds due to observed sloughing phenomena.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Petroleum

A New Wax Removal Empirical Model of Fully Coated Foam Pig

Xuedong Gao et al.

Summary: This study qualitatively and quantitatively analyzed the wax removal process of fully coated foam pigs, finding that an increase in coating hardness decreases wax breaking force and increases wax removal efficiency. Through experimental results and theoretical models, a prediction model for wax removal efficiency and a force analysis model for calculating wax breaking force were developed.

SPE JOURNAL (2021)

添加到收藏夹

Article Energy & Fuels

Experimental study on the wax removal physics of foam pig in crude oil pipeline pigging

Xuedong Gao et al.

Summary: In this study, the wax removal physics of foam pigs was experimentally investigated, and a five-phase description of wax resistive force was proposed; the effects of foam pig density, wax yield stress, and wax layer thickness on the wax removal efficiency were further discussed.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Experimental Investigation of active heating in removal of wax deposits

Elijah Bell et al.

Summary: Active heating is found to be an effective method for controlling wax deposition in offshore flow-lines, with wax deposits being removed completely, partially, or not at all at different temperatures. The majority of wax can be swiftly removed within an hour, while higher removal temperatures are needed for deposits with higher wax content. In contrast to softer wax, the removal of harder wax seems to occur in two steps, with sudden removal followed by a period of no removal before sudden removal again.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Design and application of new impeller-type wax-proof device based on speed-increasing wax-proof mechanism

Zi-ming Feng et al.

Summary: A speed-increasing impeller wax prevention device was designed for oil wells to reduce wax deposition, with optimized equipment design parameters. Experimental results showed the device's effectiveness in high waxy wells, improving economic benefits.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Review Energy & Fuels

Critical review on wax deposition in single-phase flow

Charlie van der Geest et al.

Summary: Wax deposition is a costly and complex issue in the oil and gas industry. While molecular diffusion has long been believed as the main mechanism, models based on it have severe limitations. Further research is needed to better understand the controlling mechanism of wax deposition and other related issues.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

Estimating Wax Plug Transportation Force in Crude Oil Pipeline Pigging

Xuedong Gao et al.

ENERGY & FUELS (2020)

添加到收藏夹

Article Energy & Fuels

Advances and Future Challenges of Wax Removal in Pipeline Pigging Operations on Crude Oil Transportation Systems

Weidong Li et al.

ENERGY TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Petroleum

Effect of Crystal Modifiers and Dispersants on Paraffin-Wax Particles in Petroleum Fluids

Minwei Sun et al.

SPE JOURNAL (2019)

添加到收藏夹

Article Energy & Fuels

Estimating the wax breaking force and wax removal efficiency of cup pig using orthogonal cutting and slip-line field theory

Weidong Li et al.

FUEL (2019)

添加到收藏夹

Article Energy & Fuels

A non-inertial two-phase model of wax transport in a pipeline during pigging operations

Andrea Boghi et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

A theoretical model for predicting the wax breaking force during pipeline pigging

Weidong Li et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Mechanics

An inertial two-phase model of wax transport in a pipeline during pigging operations

Andrea Boghi et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2017)

添加到收藏夹

Article Engineering, Chemical

Tribological Behaviours of Wax-in-Oil Gel Deposition in Orthogonal Cleaning Process

Gui-Bin Tan et al.

TRIBOLOGY LETTERS (2015)

添加到收藏夹

Article Energy & Fuels

Thermal, Macroscopic, and Microscopic Characteristics of Wax Deposits in Field Pipelines

Chengyu Bai et al.

ENERGY & FUELS (2013)

添加到收藏夹

Article Energy & Fuels

An Experimental Study on Wax Removal in Pipes With Oil Flow

Qian Wang et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2008)

添加到收藏夹

Article Energy & Fuels

An experimental study on mechanics of wax removal in pipeline

Q Wang et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2005)

添加到收藏夹

Article Engineering, Chemical

The strength of paraffin gels formed tinder static and flow conditions

R Venkatesan et al.

CHEMICAL ENGINEERING SCIENCE (2005)

添加到收藏夹

Article Engineering, Chemical

Formation and aging of incipient thin film wax-oil gels

P Singh et al.

AICHE JOURNAL (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.