相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Corrosion monitoring of 321H in contact with a quaternary molten salt for parabolic trough CSP plants
V. Encinas-Sanchez et al.
CORROSION SCIENCE (2021)
Molten salts in the light of corrosion mitigation strategies and embedded with nanoparticles to enhance the thermophysical properties for CSP plants
Adnan Ibrahim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Lithium nitrate purity influence assessment in ternary molten salts as thermal energy storage material for CSP plants
Mauro Henriquez et al.
RENEWABLE ENERGY (2020)
Evaluation on thermal and mechanical performance of the hot tank in the two-tank molten salt heat storage system
Zhenjie Wan et al.
APPLIED THERMAL ENGINEERING (2020)
Latest developments on TES and CSP technologies - Energy and environmental issues, applications and research trends
O. Achkari et al.
APPLIED THERMAL ENGINEERING (2020)
Advances in the development of latent heat storage materials based on inorganic lithium salts
Y. E. Milian et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Oxidation behavior and microstructure evolution of alumina-forming austenitic & high entropy alloys in steam environment at 1200 °C
Hao Shi et al.
CORROSION SCIENCE (2020)
Corrosion evaluation of eutectic chloride molten salt for new generation of CSP plants. Part 2: Materials screening performance
Angel G. Fernandez et al.
JOURNAL OF ENERGY STORAGE (2020)
Corrosion behavior and lifetime prediction of VM12, Sanicro 25 and Inconel 617 in supercritical carbon dioxide at 600 °C
Yong Gui et al.
CORROSION SCIENCE (2020)
Corrosion behavior of SS316L in ternary Li2CO3-Na2CO3-K2CO3 eutectic mixture salt for concentrated solar power plants
Jing Luo et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)
Thermophysical, environmental, and compatibility properties of nitrate and nitrite containing molten salts for medium temperature CSP applications: A critical review
T. Delise et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Corrosion assessment of 9Cr-1Mo steel in molten LiCl-KCl eutectic salt by electrochemical methods
Ch. Jagadeeswara Rao et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Corrosion behavior of Ni-Al alloys beneath chlorides melt salt at 700 °C
Lili Guo et al.
SOLAR ENERGY (2019)
Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants
Angel G. Fernandez et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Molten chloride salts for next generation concentrated solar power plants: Mitigation strategies against corrosion of structural materials
Wenjin Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Corrosion and Carburization Behavior of Heat-Resistant Steels in a High-Temperature Supercritical Carbon Dioxide Environment
Yong Gui et al.
OXIDATION OF METALS (2019)
Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: A review
Angel G. Fernandez et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
An experimental study on the corrosion sensitivity of metal alloys for usage in PCM thermal energy storages
Luigi Calabrese et al.
RENEWABLE ENERGY (2019)
Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants
Angel G. Fernandez et al.
RENEWABLE ENERGY (2019)
Design and development of nitrate-nitrite based molten salts for concentrating solar power applications
Carolina Villada et al.
SOLAR ENERGY (2019)
Corrosion of alloys in high temperature molten-salt heat transfer fluids with air as the cover gas
Tianle Liu et al.
SOLAR ENERGY (2019)
High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants
Angel G. Fernandez et al.
RENEWABLE ENERGY (2019)
High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt
A. Gomes et al.
SOLAR ENERGY (2019)
Corrosion Monitoring of Ferritic-Martensitic Steels in Molten Salt Environments for CSP Applications
Francisco Javier Perez et al.
SOLARPACES 2018: INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS (2019)
Materials corrosion for thermal energy storage systems in concentrated solar power plants
Magdalena Walczak et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Experimental study on the thermal stability of a new molten salt with low melting point for thermal energy storage applications
Yu-Ting Wu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Thermomechanical testing under operating conditions of A516Gr70 used for CSP storage tanks
Cristina Prieto et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Corrosion of AISI316 as containment material for latent heat thermal energy storage systems based on carbonates
J. Gallardo-Gonzalez et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
High temperature molten salt corrosion behavior of aluminide and nickel-aluminide coatings for heat storage in concentrated solar power plants
P. Audigie et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Corrosion testing of diffusion-coated steel in molten salt for concentrated solar power tower systems
D. Faehsing et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Corrosion resistance of alumina forming alloys against molten chlorides for energy production. II: Electrochemical impedance spectroscopy under thermal cycling conditions
J. C. Gomez-Vidal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Corrosion of steel alloys in eutectic NaCl + Na2CO3 at 700 οC and Li2CO3 + K2CO3 + Na2CO3 at 450 οC for thermal energy storage
Madjid Sarvghad et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: Pre-oxidation treatment and isothermal corrosion tests
J. C. Gomez-Vidal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Thermophysical properties of low cost lithium nitrate salts produced in northern Chile for thermal energy storage
Angel G. Fernandez et al.
RENEWABLE ENERGY (2017)
Effects of external stresses on hot corrosion behavior of stainless steel TP347HFG
Jiapeng Fu et al.
CORROSION SCIENCE (2016)
Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants
A. G. Fernandez et al.
SOLAR ENERGY (2016)
Study of corrosion by Dynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt
Cristina Prieto et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Microstructure and Mechanical Properties of Dissimilar Metal Weld Joint between VM12-SHC and X20 Martensitic Steels
N. Maledi et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017) (2016)
Effect of mixture ratio on water uptake and corrosion performance of silicone-epoxy hybrid coatings coated 2024 Al-alloy
X. Yuan et al.
PROGRESS IN ORGANIC COATINGS (2015)
Lithium in thermal energy storage: A state-of-the-art review
Luisa F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
High-temperature corrosion of Cr-Mo steel in molten LiNO3-NaNO3-KNO3 eutectic salt for thermal energy storage
Wei-Jen Cheng et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Corrosion Performance of AISI-309 Exposed to Molten Salts V2O5-Na2SO4 at 700°C Applying EIS and Rp Electrochemical Techniques
E. F. Diaz et al.
JOURNAL OF SPECTROSCOPY (2015)
Corrosion Behavior of Eutectic Molten Salt solution on Stainless Steel 316L
Fuzieah Subari et al.
WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP (2015)
High-temperature and corrosion behavior of nitrate nitrite molten salt mixtures regarding their application in concentrating solar power plants
K. Federsel et al.
INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, SOLARPACES 2014 (2015)
Evaluation of corrosion resistance of aluminium coating with and without annealing against molten carbonate using electrochemical impedance spectroscopy
C. S. Ni et al.
JOURNAL OF POWER SOURCES (2014)
Corrosion of alumina-forming austenitic steel in molten nitrate salts by gravimetric analysis and impedance spectroscopy
A. G. Fernandez et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2014)
Weld Behavior of Martensitic Steels and Ni-based Alloys for High Temperature Components
Andreas Klenk et al.
6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION (2013)
Electrochemical impedance studies of the initial-stage corrosion of 310S stainless steel beneath thin film of molten (0.62Li, 0.38K)2CO3 at 650 °C
C. S. Ni et al.
CORROSION SCIENCE (2011)
Determination of effective capacitance and film thickness from constant-phase-element parameters
Bryan Hirschorn et al.
ELECTROCHIMICA ACTA (2010)
Corrosion and Microstructure Correlation in Molten LiCl-KCl Medium
A. Ravi Shankar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Waste incineration corrosion processes:: Oxidation mechanisms by electrochemical impedance spectroscopy
F. J. Perez et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2008)
The role of temperature on the corrosion and passivation of type 310S stainless steel in eutectic (Li+K) carbonate melt
S. Frangini et al.
JOURNAL OF POWER SOURCES (2006)
Enhanced graphical representation of electrochemical impedance data
ME Orazem et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Electrochemical impedance studies of molten (0.9Na,0.1K)2SO4-induced hot corrosion of the Ni-based superalloy M38G at 900°C in air
CL Zeng et al.
ELECTROCHIMICA ACTA (2005)
Internal oxidation of Fe-Al alloys in a KCl-air atmosphere at 650°C
YS Li et al.
OXIDATION OF METALS (2004)
Review of the high-temperature oxidation of iron and carbon steels in air or oxygen
RY Chen et al.
OXIDATION OF METALS (2003)
分享论文
