4.7 Article

Multiple tuned inerter-based dampers for seismic response mitigation of continuous girder bridges

期刊

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.soildyn.2021.106954

关键词

Continuous girder bridge; Multiple tuned inerter-based dampers; Seismic response control; Optimization analysis

资金

  1. National Natural Science Foundation of China [52108278]
  2. NationalTen Thousand Talent Program for Young Top-notch Talents [W03070080]
  3. Key Research and Development Plan Program of Jiangsu Province [BE2018120]

向作者/读者索取更多资源

The study focuses on using multiple TIBDs to enhance the seismic performance of continuous girder bridges, with an emphasis on optimizing the frequency ratio and damping ratio of the bridges. Results show that TIBDs can effectively improve the seismic performance of long-span HSR continuous girder bridges, but viscous dampers demonstrate better vibration mitigation on seismic responses with large inertance ratio in the transverse direction.
Tuned inerter-based dampers (TIBDs), such as the tuned viscous mass damper (TVMD) and tuned inerter damper (TID), have demonstrated better control performance compared with traditional dampers. To enhance the seismic performance of continuous girder bridges, multiple TIBDs are employed to protect the long-span highspeed railway (HSR) continuous girder bridges under the seismic excitation. The governing equations of the motion of the bridge with TIBDs are reformulated in state-space. Based on the H2 control strategy, the frequency ratio and damping ratio of TIBDs to tune multiple modes of bridges are optimized. The control performance of TIBDs with optimal parameters is evaluated and compared with that of the viscous dampers (VDs) in terms of mitigating the peak response and root mean square (RMS) response of the bridge. Meanwhile, through analyzing the power spectral density and dissipated energy of different dampers, the mitigation principle of TIBDs is explored. Results show that TIBDs with optimal parameters can effectively improve seismic performance of the long-span HSR continuous girder bridge. Nevertheless, VDs shows better effectiveness of vibration mitigation on some seismic responses at large inertance ratio in the transverse direction. In addition, the control efficiency of seismic mitigation is reduced for optimal TIBD compared with that for VD with the increase of inertance ratio. Note that the non-linear behavior of the ballasted track system for used HSR bridge model is not considered in the study. Therefore, the proposed analysis method and results obtained in this study can provide references for seismic response control in the linear continuous girder bridges using multiple TIBDs.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据