☆ 4.8 Article

Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk-Heterojunction or Layer-By-Layer Structure

SMALL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Employing liquid crystal material as regulator to enhance performance of photomultiplication type polymer photodetectors

Kaixuan Yang et al.

Summary: Photomultiplication type polymer photodetectors were fabricated using PBDB-T:BTPV-4F and PBDB-T:BTR:BTPV-4F as blend active layers, achieving improved performance by controlling electron traps and hole tunneling in the blend active layers. The use of the regulator BTR optimized hole mobility in the blend active layers, leading to enhanced responsivity and external quantum efficiency of the PM-PPDs.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Over 17.7% efficiency ternary-blend organic solar cells with low energy-loss and good thickness-tolerance

Jinhua Gao et al.

Summary: In this study, ternary-blend organic solar cells (TOSCs) were fabricated with PM6:BTP-4F-12 as the host system and IT-M as the third component, yielding a power-conversion-efficiency (PCE) of 17.71% with excellent thickness tolerance. The third component IT-M played multiple roles in improving the performance of TOSCs by optimizing molecular arrangement and phase separation in the active layers, leading to enhanced short-circuit-current density, open-circuit-voltage, and fill-factor.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecular dispersion enhances photovoltaic efficiency and thermal stability in quasi-bilayer organic solar cells

Xuning Zhang et al.

Summary: Utilizing a polymeric donor PBDBT-2F and a non-fullerene acceptor Y6, a strategy was proposed to enhance the photovoltaic performance in planar heterojunction-based organic solar cells by dilute dispersions of the donor in the acceptor-dominant phase. This led to an improved charge transport balance and accelerated photocarrier sweep-out, resulting in a power conversion efficiency of 15.4% in the PHJ-OSCs. Moreover, the PHJ solar cells with donor dispersions exhibited better thermal stability compared to bulk heterojunction devices.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Applied

14.46% Efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting

Chunyu Xu et al.

Summary: In this study, small molecule organic photovoltaics (SMPVs) were fabricated using a liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4F and Y6. The ternary SMPVs with 30 wt% Y6 achieved a high power conversion efficiency of 14.46% due to a well trade-off between phase separation and photon harvesting. Incorporating Y6 into the acceptors improved the performance of SMPVs significantly.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improved Blend Film Morphology and Free Carrier Generation Provide a High-Performance Ternary Polymer Solar Cell

Bing-Huang Jiang et al.

Summary: Non-fullerene organic photovoltaics (OPVs) have achieved high power conversion efficiencies (PCEs). By optimizing the blend morphology of a two-donor (PM6, TPD-3F)/one-acceptor (Y6) ternary blend, improved OPV performance was achieved. Good miscibility between PM6 and TPD-3F, combined with device optimization using 1-chloronaphthalene as an additive, resulted in efficient exciton dissociation and carrier transport for higher PCE.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo-Planar Heterojunction Solar Cells by Additives Treatment

Qiannan He et al.

Summary: This study demonstrates the impact of DIO on the crystallinity of IT-4F, introduces a new efficiency-determining factor, and shows that a more balanced CCLpolymer/CCLacceptor leads to improved charge mobility and better performance of OSCs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6:Y6-1O as acceptor

Xiaoling Ma et al.

Summary: A series of ternary organic photovoltaics have been successfully fabricated by incorporating Y6-1O, which leads to an increase in open-circuit voltage and power conversion efficiency of the devices. By finely adjusting the content of Y6-1O, the optimal device with 30% Y6-1O achieves a conversion efficiency of 17.91%, with significantly improved short-circuit current density and fill factor.

NATIONAL SCIENCE REVIEW (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Electron Acceptor Analogue for Lowering Trap Density in Organic Solar Cells

Yihang Zhang et al.

Summary: The introduction of BTPR as a third component in organic solar cells reduces the trap density, leading to significant improvements in PCE and energy loss. This offers new possibilities for achieving higher efficiency solar cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%

Lingling Zhan et al.

Summary: This study proposes and demonstrates a method to optimize the morphology of the active layer in organic photovoltaic devices by combining the layer-by-layer (LbL) procedure and the ternary strategy. By adding an asymmetric electron acceptor to the binary donor:acceptor host, a vertical phase distribution is formed, leading to improved efficiency in OPV devices.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Achieving Efficient Ternary Organic Solar Cells Using Structurally Similar Non-Fullerene Acceptors with Varying Flanking Side Chains

Yuan Chang et al.

Summary: This study systematically investigated the steric and electronic effects of three structurally similar non-fullerene acceptors on the blend morphology and device performance. By incorporating non-fullerene acceptors with better molecular packing into the PTQ10 donor polymer, a novel ternary strategy was explored, resulting in enhanced photon response, improved charge transport, and suppressed charge recombination, ultimately achieving an outstanding power conversion efficiency of 17.6% with a fill factor of 78.8% in the ternary device.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Smart Strategy: Transparent Hole-Transporting Polymer as a Regulator to Optimize Photomultiplication-type Polymer Photodetectors

Kaixuan Yang et al.

Summary: The study utilized conjugated polymer and transparent polymer to fabricate photomultiplication-type polymer photodetectors, with the transparent polymer acting as a regulator in the active layers to improve EQE and response speed, resulting in enhanced performance of the PM-PPDs.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Quinoxaline-Based D-A Copolymer Donor Achieving 17.62% Efficiency of Organic Solar Cells

Can Zhu et al.

Summary: Side-chain engineering is a crucial strategy for enhancing the power conversion efficiency of organic solar cells. In this study, two copolymers were designed and synthesized, with PBQ6 exhibiting superior performance and achieving a high efficiency of 17.62% for organic solar cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simple Non-Fused Electron Acceptors Leading to Efficient Organic Photovoltaics

Tian-Jiao Wen et al.

Summary: Despite recent progress, organic photovoltaics (OPVs) still need to work on balancing efficiency, stability, and cost. This study developed two non-fused electron acceptors which, when blended with a specific polymer, achieved the highest reported efficiency for fully unfused electron acceptors.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Efficiency (16.93%) Pseudo-Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy

Xinkang Wang et al.

Summary: The research focuses on improving the efficiency of organic solar cells by combining the SD method and additive general strategy, resulting in a vertical phase separation device with enhanced morphology using additives 1,10-decanediol and 1-chloronaphthalene. This approach showed promising results in enhancing charge separation, collection, and ultimately achieving a high power conversion efficiency of 16.93%.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wide Bandgap Polymer with Narrow Photon Harvesting in Visible Light Range Enables Efficient Semitransparent Organic Photovoltaics

Chunyu Xu et al.

Summary: The study successfully prepared efficient semitransparent organic photovoltaic devices using a wide bandgap polymer and a small molecule blend system, achieving high visible light transmittance and high photovoltaic conversion efficiency through adjusting the blend ratio and optimizing the electrode structure.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

17.6%-Efficient Quasiplanar Heterojunction Organic Solar Cells from a Chlorinated 3D Network Acceptor

Hui Chen et al.

Summary: By utilizing the quasiplanar heterojunction (Q-PHJ) structure, an organic solar cell (OSC) based on BTIC-BO-4Cl demonstrates high efficiency comparable to traditional bulk heterojunction (BHJ) OSCs. This study suggests that the Q-PHJ architecture is suitable for specific donors and acceptors, offering an alternative approach to photovoltaic material design and device fabrication.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Organic photovoltaics with 300 nm thick ternary active layers exhibiting 15.6% efficiency

Yue Wang et al.

Summary: This study demonstrates the importance of over 200 nm thickness of active layers for efficient organic photovoltaics, with ternary thick-film OPVs showing improved performance due to optimized molecular arrangement and phase separation leading to significantly improved fill factors.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rational compatibility in a ternary matrix enables all-small-molecule organic solar cells with over 16% efficiency

Mengyun Jiang et al.

Summary: In this study, ternary small-molecule organic solar cells were fabricated by incorporating a small molecule acceptor Y7 as a morphology modulator into a B1:BO-4Cl matrix, enabling fine-tuning of molecular arrangement to facilitate charge extraction and achieving top-ranked power conversion efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Highly sensitive all-polymer photodetectors with ultraviolet-visible to near-infrared photo-detection and their application as an optical switch

Zijin Zhao et al.

Summary: All-polymer photodetectors were fabricated with PMBBDT and N2200 as photoactive layers, which exhibited an external quantum efficiency of 20,700% under 4V. By employing a PEDOT:PSS/P-TPD double hole transport layer, the signal-to-noise ratio, linear dynamic range, and specific detectivity were simultaneously enhanced. An optical switch system without any current amplifier was successfully realized.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Physical

Semitransparent organic solar cells exhibiting 13.02% efficiency and 20.2% average visible transmittance

Zhenghao Hu et al.

Summary: Semitransparent organic solar cells with various material compositions were successfully fabricated. By adjusting the material ratios and employing a ternary strategy, the power conversion efficiency and average visible transmittance were simultaneously improved.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Efficient Ternary All-Polymer Solar Cells with Enhanced Stability

Kui Feng et al.

Summary: Developing organic solar cells based on a ternary active layer is an effective approach to improve light harvesting, with recent advances showing significant progress in the field of all-polymer solar cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Performance Ternary Organic Solar Cells with Controllable Morphology via Sequential Layer-by-Layer Deposition

Minrun Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Pseudoplanar Heterojunction Ternary Organic Solar Cells with Nonfullerene Alloyed Acceptor

Ji Wan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thick-Film Organic Solar Cells Achieving over 11% Efficiency and Nearly 70% Fill Factor at Thickness over 400 nm

Wei Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring and Modifying an Organic Electron Acceptor toward the Cathode Interlayer for Highly Efficient Organic Solar Cells

Qing Liao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Semitransparent Organic Solar Cells Enabled by a Sequentially Deposited Bilayer Structure

Yu Song et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Novel Wide-Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Ying Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Asymmetric Electron Acceptors for High-Efficiency and Low-Energy-Loss Organic Photovoltaics

Shuixing Li et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

16.5% efficiency ternary organic photovoltaics with two polymer donors by optimizing molecular arrangement and phase separation

Guanshui Xie et al.

NANO ENERGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Qiaoshi An et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Chemistry, Physical

Guest-oriented non-fullerene acceptors for ternary organic solar cells with over 16.0% and 22.7% efficiencies under one-sun and indoor light

Yongjoon Cho et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Selective Hole and Electron Transport in Efficient Quaternary Blend Organic Solar Cells

Lingeswaran Arunagiri et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double-Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells

Yunpeng Qin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

A critical review on semitransparent organic solar cells

Zhenghao Hu et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient modulation of end groups for the asymmetric small molecule acceptors enabling organic solar cells with over 15% efficiency

Gang Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency

Rui Sun et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss

Xiaoling Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Over 14.5% efficiency and 71.6% fill factor of ternary organic solar cells with 300 nm thick active layers

Jinhua Gao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Molecular packing control enables excellent performance and mechanical property of blade-cast all-polymer solar cells

Baojun Lin et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Ternary Organic Solar Cells with Small Nonradiative Recombination Loss

Yuanpeng Xie et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Unraveling the Morphology in Solution-Processed Pseudo-Bilayer Planar Heterojunction Organic Solar Cells

Liqiang Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improved Charge Transport and Reduced Nonradiative Energy Loss Enable Over 16% Efficiency in Ternary Polymer Solar Cells

Runnan Yu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Ternary Blended Fullerene-Free Polymer Solar Cells with 16.5% Efficiency Enabled with a Higher-LUMO-Level Acceptor to Improve Film Morphology

Kun Li et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Ternary organic solar cells based on two compatible PDI-based acceptors with an enhanced power conversion efficiency

Kangkang Weng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 15%

Tao Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Alkyl Chain Tuning of Small Molecule Acceptors for Efficient Organic Solar Cells

Kui Jiang et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells

Rui Sun et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Vertical Stratification Engineering for Organic Bulk-Heterojunction Devices

Liqiang Huang et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Physical

High-efficiency and air stable fullerene-free ternary organic solar cells

Qiaoshi An et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13%

Li Nian et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Over 13% Efficiency Ternary Nonfullerene Polymer Solar Cells with Tilted Up Absorption Edge by Incorporating a Medium Bandgap Acceptor

Miao Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Open circuit voltage of organic solar cells: an in-depth review

Naveen Kumar Elumalai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance

Maojie Zhang et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.