4.7 Article

Antimony removal from textile wastewater by combining PFS&PAC coagulation: Enhanced Sb(V) removal with presence of dispersive dye

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Efficient removal of Sb(V) in textile wastewater through novel amorphous Si-doped Fe oxide composites: Phase composition, stability and adsorption mechanism

Kunlun Yang et al.

Summary: The introduction of Si doping in Fe oxide composites inhibits crystal growth, reduces particle size, and decreases aggregation of Fe oxide, leading to increased surface area and exposed hydroxyl groups to enhance Sb(V) removal capacity. Optimal SFOC10 with Fe/Si molar ratio of 10:1 showed the highest surface area, maximum Sb(V) removal capacity, and better phase stability during cyclic adsorption-desorption process, making it effective for removing Sb(V) from real textile wastewater.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Effect of dye structure on color removal efficiency by coagulation

Felix Mcyotto et al.

Summary: The study showed that the dye structures significantly affect the color removal efficiency by coagulation, and the best dye-coagulant combinations for dyes with the same structures and functional groups can enhance the removal efficiency. It was also found that dyes with the same auxochromes and charge exhibit similar color removal efficiency when treated with the same coagulant.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

A combined experimental and DFT investigation of mono azo thiobarbituric acid based chalcone disperse dyes

Alaa Z. Omar et al.

Summary: A new series of monoazo dyes were synthesized through reactions of 4-aminoacetophenone with various substituted benzaldehydes, followed by reaction with thiobarbituric acid to produce azo dyes. The structures were confirmed using IR and NMR data. Dyeing performance on polyester fibers was evaluated, showing moderate to excellent fastness properties. The effects of substituents on color and dyeing properties were discussed, along with the mechanism of dyeing polyester fiber.

DYES AND PIGMENTS (2021)

Article Engineering, Environmental

Influence of Al(III) and Sb(V) on the transformation of ferrihydrite nanoparticles: Interaction among ferrihydrite, coprecipitated Al(III) and Sb (V)

Chujia Ye et al.

Summary: This study investigated the dynamic interactions among ferrihydrite, Al(III) and Sb(V), as well as the influence of coprecipitated Al(III) and Sb(V) on the transformation of ferrihydrite. Results showed that Al(III) enhanced the immobilization of Sb(V) and the presence of Sb(V) induced more production of extractable Al(III). XRD patterns revealed that the transformation rate of coprecipitated Al(III) and Sb(V) ferrihydrite was higher than Al-coprecipitated ferrihydrite.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Statistics & Probability

Parametric boostrap and objective Bayesian testing for heteroscedastic one-way ANOVA

Guoyi Zhang et al.

Summary: This article explores the relationship between parametric bootstrap (PB) and objective Bayesian (OB) approaches in testing the equality of factor level means in heteroscedastic one-way analysis of variance (ANOVA) problems. Through simulation studies, overall mean tests based on PB, OB, and posterior predictive distribution approaches were compared. It was also shown that PB and OB overall mean tests for one-way heteroscedastic ANOVA are asymptotically equivalent.

STATISTICS & PROBABILITY LETTERS (2021)

Article Environmental Sciences

Algal toxicity induced by effluents from textile-dyeing wastewater treatment plants

Hualing Cai et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2020)

Article Chemistry, Multidisciplinary

Advantage of selective production of green rusts for Sb(V) removal in Fe(0) electrocoagulation

Di Cao et al.

CHINESE CHEMICAL LETTERS (2020)

Article Green & Sustainable Science & Technology

Optimization of electrocoagulation process for disperse and reactive dyes using the response surface method with reuse application

Sergio Perez Criado et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Environmental Sciences

Rejection of antimony in dyeing and printing wastewater by forward osmosis

Lijun Meng et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Engineering, Environmental

Effects of ferrihydrite nanoparticle incorporation in cementitious materials on radioactive waste immobilization

Shuai Fan et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Review Environmental Sciences

Antimony contamination, consequences and removal techniques: A review

Jiayu Li et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2018)

Article Engineering, Environmental

One-pot synthesis of α-Fe2O3 nanoplates-reduced graphene oxide composites for supercapacitor application

Hongying Quan et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Review Metallurgy & Metallurgical Engineering

Antimony in the metallurgical industry: A review of its chemistry and environmental stabilization options

Ravinder S. Multani et al.

HYDROMETALLURGY (2016)

Article Nanoscience & Nanotechnology

Influence of Content of Al2O3 on Structure and Properties of Nanocomposite Nb-B-Al-O films

Na Liu et al.

NANOSCALE RESEARCH LETTERS (2015)

Article Nanoscience & Nanotechnology

Influence of Content of Al2O3 on Structure and Properties of Nanocomposite Nb-B-Al-O films

Na Liu et al.

NANOSCALE RESEARCH LETTERS (2015)

Article Engineering, Environmental

Efficient removal of trace antimony(III) through adsorption by hematite modified magnetic nanoparticles

Chao Shan et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Article Engineering, Environmental

Behavior of Antimony(V) during the Transformation of Ferrihydrite and Its Environmental Implications

Satoshi Mitsunobu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Article Metallurgy & Metallurgical Engineering

Electrowinning of antimony from model sulphide alkaline solutions

Samuel A. Awe et al.

HYDROMETALLURGY (2013)

Article Engineering, Environmental

Effects of Adsorbed Arsenate on the Rate of Transformation of 2-Line Ferrihydrite at pH 10

Soumya Das et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Article Engineering, Environmental

Coagulation characteristics of titanium (Ti) salt coagulant compared with aluminum (Al) and iron (Fe) salts

Y. X. Zhao et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Biotechnology & Applied Microbiology

Optimization of critical medium components using response surface methodology for lipase production by Rhizopus delemar

Ue Acikel et al.

FOOD AND BIOPRODUCTS PROCESSING (2010)

Article Engineering, Chemical

Studies on the removal of phosphate from drinking water by electrocoagulation process

Subramanyan Vasudevan et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2008)

Article Chemistry, Multidisciplinary

Improvement in the coagulation performance by combining Al and Fe coagulants in water purification

Sun-Jong Lee et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2008)

Article Geochemistry & Geophysics

Simultaneous incorporation of Mn and Al in the goethite structure

Mariana Alvarez et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2007)

Article Engineering, Environmental

Arsenic removal by electrocoagulation using combined Al-Fe electrode system and characterization of products

Jewel A. G. Gomes et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

Article Engineering, Environmental

Comparing polyaluminum chloride and ferric chloride for antimony removal

M Kang et al.

WATER RESEARCH (2003)