相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Valorization of disposable COVID-19 mask through the thermo-chemical process
Sungyup Jung et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Is incineration the terminator of plastics and microplastics?
Zhan Yang et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Non-thermal plasma-assisted hydrogenolysis of polyethylene to light hydrocarbons
Libo Yao et al.
CATALYSIS COMMUNICATIONS (2021)
Functionalization of char derived from pyrolysis of metallised food packaging plastics waste and its application as a filler in fiberglass/epoxy composites
Samy Yousef et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
Upcycling of plastic waste into fluorescent carbon dots: An environmentally viable transformation to biocompatible C-dots with potential prospective in analytical applications
Savita Chaudhary et al.
WASTE MANAGEMENT (2021)
Graphene nanosheets derived from plastic waste for the application of DSSCs and supercapacitors
Sandeep Pandey et al.
SCIENTIFIC REPORTS (2021)
Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview
Norizan Mohd Nurazzi et al.
POLYMERS (2021)
Characterization and Use of Char Produced from Pyrolysis of Post-Consumer Mixed Plastic Waste
M. A. Martin-Lara et al.
WATER (2021)
Abandoned Covid-19 personal protective equipment along the Bushehr shores, the Persian Gulf: An emerging source of secondary microplastics in coastlines
Razegheh Akhbarizadeh et al.
MARINE POLLUTION BULLETIN (2021)
Face mask waste generation and management during the COVID-19 pandemic: An overview and the Peruvian case
Fernando G. Torres et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Development and Characterization of Polypropylene Waste from Personal Protective Equipment (PPE)-Derived Char-Filled Sugar Palm Starch Biocomposite Briquettes
M. M. Harussani et al.
POLYMERS (2021)
Slow pyrolysis of an LDPE/PP mixture: Kinetics and process performance
Marco Maniscalco et al.
JOURNAL OF THE ENERGY INSTITUTE (2021)
Thermal and in situ infrared analysis to characterise the slow pyrolysis of mixed municipal solid waste (MSW) and its components
Vibhuti Chhabra et al.
RENEWABLE ENERGY (2020)
Behaviour of waste polypropylene pyrolysis char-based epoxy composite materials
Merve Sogancioglu et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Catalytic fast co-pyrolysis of organosolv lignin and polypropylene over in-situ red mud and ex-situ HZSM-5 in two-step catalytic micro reactor
Sumin Ryu et al.
APPLIED SURFACE SCIENCE (2020)
Degradation Rates of Plastics in the Environment
Ali Chamas et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Fire Suppression and Thermal Behavior of Biobased Rigid Polyurethane Foam Filled with Biomass Incineration Waste Ash
Agne Kairyte et al.
POLYMERS (2020)
Critical Supply Shortages - The Need for Ventilators and Personal Protective Equipment during the Covid-19 Pandemic
Megan L. Ranney et al.
NEW ENGLAND JOURNAL OF MEDICINE (2020)
Disinfection technology of hospital wastes and wastewater: Suggestions for disinfection strategy during coronavirus Disease 2019 (COVID-19) pandemic in China
Jiao Wang et al.
ENVIRONMENTAL POLLUTION (2020)
Valorizing Plastic-Contaminated Waste Streams through the Catalytic Hydrothermal Processing of Polypropylene with Lignocellulose
Sukanya Hongthong et al.
ACS OMEGA (2020)
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Yutao Zhang et al.
FUEL PROCESSING TECHNOLOGY (2020)
Improper solid waste management increases potential for COVID-19 spread in developing countries
Christopher Nzediegwu et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
On deconvolution for understanding synergistic effects in co-pyrolysis of pinewood and polypropylene
Xuan Liu et al.
APPLIED ENERGY (2020)
Pyrolysis of waste polypropylene plastics for energy recovery: Influence of heating rate and vacuum conditions on composition of fuel product
George Kofi Parku et al.
FUEL PROCESSING TECHNOLOGY (2020)
COVID-19 waste management: Effective and successful measures in Wuhan, China
Narendra Singh et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Assessing the potential of the recycled plastic slow pyrolysis for the production of streams attractive for refineries
Roberto Palos et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)
Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC)
S. M. Al-Salem
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Processing and characterization analysis of pyrolyzed oil rubber (from waste tires)-epoxy polymer blend composite for lightweight structures and coatings applications
Akarsh Verma et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Activator-assisted pyrolysis of polypropylene
Ki-Bum Park et al.
APPLIED ENERGY (2019)
Biochar from residual biomass as a concrete filler for improved thermal and acoustic properties
Douglas Cuthbertson et al.
BIOMASS & BIOENERGY (2019)
Plastic waste fuelled solid oxide fuel cell system for power and carbon nanotube cogeneration
Weizi Cai et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Plasma gasification of municipal solid waste for waste-to-value processing
M. T. Munir et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization
Rohit Kumar Singh et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Rashid Miandad et al.
FRONTIERS IN ENERGY RESEARCH (2019)
Co-production of hydrogen and carbon nanotubes from real-world waste plastics: Influence of catalyst composition and operational parameters
Dingding Yao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Effect of water entrainment by pre-soaked biochar particles on strength and permeability of cement mortar
Souradeep Gupta et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Experimental characterisation of a diesel engine running on polypropylene oils produced at different pyrolysis temperatures
Ioannis Kalargaris et al.
FUEL (2018)
Petrochemical feedstock from pyrolysis of waste polyethylene and polypropylene using different catalysts
Bianca Pedroso S. Santos et al.
FUEL (2018)
Upgrading of non-condensable pyrolysis gas from mixed plastics through catalytic decomposition and dechlorination
Andrei Veksha et al.
FUEL PROCESSING TECHNOLOGY (2018)
Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)
Laura S. Diaz-Silvarrey et al.
GREEN CHEMISTRY (2018)
Untapped conversion of plastic waste char into carbon-metal LDOs for the adsorption of Congo red
R. Miandad et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)
Valorization of packaging plastic waste by slow pyrolysis
Pallab Das et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Pressurized carbonization of mixed plastics into porous carbon sheets on magnesium oxide
Jiali Ma et al.
RSC ADVANCES (2018)
The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel
Pallab Das et al.
WASTE MANAGEMENT (2018)
Thermal degradation of medical plastic waste by in-situ FTIR, TG-MS and TG-GC/MS coupled analyses
Linbo Qin et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)
Experimental Study of Thermal and Catalytic Pyrolysis of Plastic Waste Components
Azubuike Francis Anene et al.
SUSTAINABILITY (2018)
Production of Biochar, Bio-Oil and Synthesis Gas from Cashew Nut Shell by Slow Pyrolysis
Renata Moreira et al.
WASTE AND BIOMASS VALORIZATION (2017)
Catalytic co-pyrolysis of polypropylene and Laminaria japonica over zeolitic materials
Young-Min Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Experimental study of catalytic pyrolysis of polyethylene and polypropylene over USY zeolite and separation to gasoline and diesel-like fuels
Chantal Kassargy et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)
Pyrolysis of waste high density polyethylene (HDPE) and low density polyethylene (LDPE) plastics and production of epoxy composites with their pyrolysis chars
Merve Sogancioglu et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Production, use, and fate of all plastics ever made
Roland Geyer et al.
SCIENCE ADVANCES (2017)
Ex-situ catalytic co-pyrolysis of lignin and polypropylene to upgrade bio-oil quality by microwave heating
Dengle Duan et al.
BIORESOURCE TECHNOLOGY (2017)
Catalytic co-pyrolysis of paper biomass and plastic mixtures (HDPE (high density polyethylene), PP (polypropylene) and PET (polyethylene terephthalate)) and product analysis
Jayeeta Chattopadhyay et al.
ENERGY (2016)
A review on pyrolysis of plastic wastes
Shafferina Dayana Anuar Sharuddin et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Pyrolytic liquid fuel: A source of renewable electricity generation in Makkah
M. Rehan et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2016)
Catalytic co-pyrolysis of biomass and polyethylene in a tandem micropyrolyzer
Yuan Xue et al.
FUEL (2016)
Understanding the pyrolysis mechanism of polyvinylchloride (PVC) by characterizing the chars produced in a wire-mesh reactor
Junbo Zhou et al.
FUEL (2016)
Carbon nanotubes synthetized from gaseous products of waste polymer pyrolysis and their application
N. Borsodi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)
Methodology for estimating pyrolysis rates of charring insulation materials using experimental temperature measurements
Juan Patricio Hidalgo et al.
JOURNAL OF BUILDING ENGINEERING (2016)
Combustion of Char from Plastic Wastes Pyrolysis
Harwin Saptoadi et al.
PROCEEDINGS OF THE 3RD AUN/SEED-NET REGIONAL CONFERENCE ON ENERGY ENGINEERING AND THE 7TH INTERNATIONAL CONFERENCE ON THERMOFLUIDS (RCENE/THERMOFLUID 2015) (2016)
Thermal utilization (treatment) of plastic waste
Janusz Wojciech Bujak
ENERGY (2015)
Thermal Cracking of Virgin and Waste Plastics of PP and LDPE in a Semibatch Reactor under Atmospheric Pressure
Guoxun Yan et al.
ENERGY & FUELS (2015)
Effect of polyethylene terephthalate on the catalytic pyrolysis of polystyrene: Investigation of the liquid products
Adnan et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2015)
Effect of carbon nanotubes on thermal pyrolysis of high density polyethylene and polypropylene
Omar Gutierrez et al.
POLYMER DEGRADATION AND STABILITY (2015)
Fast co-pyrolysis of cellulose and polypropylene using Py-GC/MS and Py-FT-IR
Deepak Kumar Ojha et al.
RSC ADVANCES (2015)
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Imtiaz Ahmad et al.
INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)
Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags
Brajendra K. Sharma et al.
FUEL PROCESSING TECHNOLOGY (2014)
Activation of waste tire char by cyclic liquid-phase oxidation
F. Heras et al.
FUEL PROCESSING TECHNOLOGY (2014)
Use of plastic waste as a fuel in the co-pyrolysis of biomass. Part I: The effect of the addition of plastic waste on the process and products
M. Sajdak et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)
Evaluation of pyrolysis process parameters on polypropylene degradation products
Mehrdad Seifali Abbas-Abadi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)
Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts
Adnan et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Low-Temperature Co-pyrolysis of Polypropylene and Coffee Wastes to Fuels
Elena Zanella et al.
ENERGY & FUELS (2013)
Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources
Gulnare Ahmetli et al.
POLYMER COMPOSITES (2013)
Waste tyre pyrolysis - A review
Juan Daniel Martinez et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
Seyed Mousa Fakhr Hoseini et al.
JOURNAL OF CHEMISTRY (2013)
Syngas production from pyrolysis-catalytic steam reforming of waste biomass in a continuous screw kiln reactor
Chidi E. Efika et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor
M. Arabiourrutia et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Pyrolysis of waste polypropylene for the synthesis of carbon nanotubes
Neeraj Mishra et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)
Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste
A. Adrados et al.
WASTE MANAGEMENT (2012)
NEWS FEATURE: Cooking up fuel
Mason Inman
NATURE CLIMATE CHANGE (2012)
Catalytic degradation of waste polypropylene by pyrolysis
K. Tekin et al.
JOURNAL OF THE ENERGY INSTITUTE (2012)
Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
Gorka Elordi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Study of the pyrolysis of municipal solid waste for the production of valuable products
I. Velghe et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2011)
Catalytic pyrolysis of polypropylene to synthesize carbon nanotubes and hydrogen through a two-stage process
Jie Liu et al.
POLYMER DEGRADATION AND STABILITY (2011)
Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor
Su-Hwa Jung et al.
FUEL PROCESSING TECHNOLOGY (2010)
Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products-A world prospective
Achyut K. Panda et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Degradation of unpretreated and thermally pretreated polypropylene by soil consortia
Ambika Arkatkar et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2009)
Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time
Jude A. Onwudili et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor
G. Elordi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2009)
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
D. S. Achilias et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures
Paul T. Williams et al.
RESOURCES CONSERVATION AND RECYCLING (2007)
Polypropylene as a carbon source for the synthesis of multi-walled carbon nanotubes via catalytic combustion
Zhiwei Jiang et al.
CARBON (2007)
Effects of plastic wastes on coal pyrolysis behaviour and the structure of semicokes
L Vivero et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2005)
Study of the catalytic pyrolysis behaviour of polyethylene-polypropylene mixtures
A Marcilla et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2005)
Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons
YH Lin et al.
POLYMER DEGRADATION AND STABILITY (2005)
Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor
SS Kim et al.
CHEMICAL ENGINEERING JOURNAL (2004)
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
A Demirbas
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Thermal and thermo-catalytic degradation of high-density polyethylene waste
N Miskolczi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2004)
Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons
N Miskolczi et al.
POLYMER DEGRADATION AND STABILITY (2004)
Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis
PT Williams et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2004)
Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene
NK Ciliz et al.
WASTE MANAGEMENT (2004)
Pyrolysis of polypropylene in a nitrogen plasma reactor
L Tang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2003)
Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor
R Aguado et al.
ENERGY & FUELS (2002)
Classification of volatile products from the temperature-programmed pyrolysis of polypropylene (PP), atactic-polypropylene (APP) and thermogravimetrically derived kinetics of pyrolysis
L Ballice et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2002)
Comparison of plastic types for catalytic degradation of waste plastics into liquid product with spent FCC catalyst
KH Lee et al.
POLYMER DEGRADATION AND STABILITY (2002)
Tertiary resource recovery from waste polymers via pyrolysis: Neat and binary mixture reactions of polypropylene and polystyrene
HW Wong et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
Conversion of low density polyethylene into petrochemical feedstocks using a continuous screw kiln reactor
DP Serrano et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2001)
Catalytic degradation of high density polyethylene and polypropylene into liquid fuel in a powder-particle fluidized bed
GH Luo et al.
POLYMER DEGRADATION AND STABILITY (2000)
Catalytic conversion of polyolefins into fuels over zeolite beta
J Aguado et al.
POLYMER DEGRADATION AND STABILITY (2000)
分享论文
