4.7 Article

New insights on introducing modern multifunctional additives into motor gasoline

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Environmental Sciences

Uniqueness technique for introducing high octane environmental gasoline using renewable oxygenates and its formulation on Fuzzy modeling

Tamer M. M. Abdellatief et al.

Summary: This study proposes a new approach to examine the impact of renewable fuel additives through fuzzy modeling, showing that using low carbon oxygenates can enhance the quality and quantity of heavy hydrocracked naphtha, potentially contributing to the production of high quality environmentally friendly gasoline.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Multidisciplinary Sciences

Corrosion assessment of metals in bioethanol-gasoline blends using electrochemical impedance spectroscopy

Libia M. Baena et al.

Summary: The impact of biofuels on the performance of materials in auto parts was evaluated by studying the behavior of various metals in different ethanol-gasoline blends. The results showed that copper and carbon steel exhibited corrosion susceptibility in all fuel blends, while stainless steel and tin showed good anticorrosion behavior.

HELIYON (2021)

Article Green & Sustainable Science & Technology

Combustion investigation of ternary blend mixture of biodiesel/n-butanol/diesel: CI engine performance and emission control

Kartikkumar Thakkar et al.

Summary: The study aimed to analyze the effects of a novel ternary blend of n-butanol and castor oil methyl ester with petro-diesel on combustion, engine performance, and emission characteristics of a four-stroke single-cylinder diesel engine. The results showed that the B15Bu15 fuel blend improved engine performance and reduced NOx emissions compared to B30, making it the optimal fuel blend.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Environmental Sciences

Hybrid low-carbon high-octane oxygenated gasoline based on low-octane hydrocarbon fractions

Mikhail A. Ershov et al.

Summary: Low-carbon fuel is the main trend in oil refining industry development. A novel approach for producing low-carbon high-octane oxygenated environmentally friendly motor gasoline has been proposed, leading to successful production of high-octane environmentally friendly motor gasoline, which can reduce environmental impacts and improve product quality.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Energy & Fuels

Creation a novel promising technique for producing an unleaded aviation gasoline 100UL

Mikhail A. Ershov et al.

Summary: This study investigates the influence of aromatic amines, aromatic hydrocarbons, and MTBE on the antiknock characteristics of model blends to create a novel technique for producing unleaded aviation gasoline. The results indicate that the optimal fuel composition contains isooctane, isopentane, toluene, isopropylbenzene, MTBE, m-toluidine, and isopropyl alcohol, with characteristics close to commercial aviation gasoline. Furthermore, the non-hydrocarbon additives concentrations tested in this study have been used on an industrial scale in various countries.
Article Green & Sustainable Science & Technology

Effects of gasoline composition on engine performance, exhaust gases and operational costs

Lucimar Venancio Amaral et al.

Summary: New technologies aim to improve the performance of internal combustion engines by enhancing knock resistance in fuels. Aromatics, paraffins, and lead-based additives are commonly used in gasoline to increase octane rating, but alternatives like ethanol are gaining interest due to their renewable nature. Ethanol, widely used in Brazil and the United States, has shown to increase octane rating, thermal efficiency, and engine power. Despite improvements in engine performance and octane rating, the cost implications of using ethanol blends may outweigh the benefits. For example, higher ethanol percentages in gasoline blends resulted in a significant reduction in net power cost and NOx emissions.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Review Green & Sustainable Science & Technology

A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine

Dandan Han et al.

Summary: The article summarizes measures for reducing hydrocarbon emissions during cold start of gasoline engines, including pre-treatment and after-treatment approaches, as well as the use of HC adsorption technology.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Review Energy & Fuels

A review of controlling strategies of the ignition timing and combustion phase in homogeneous charge compression ignition (HCCI) engine

Xiongbo Duan et al.

Summary: The HCCI engine presents superior fuel economy and emissions compared to traditional combustion engines, but lacks direct control over auto-ignition timing. Effective techniques and controlling strategies, such as fuel management and exhaust gas recirculation, are used to optimize combustion and expand operation range.
Article Chemistry, Applied

A new approach for producing mid-ethanol fuels E30 based on low-octane hydrocarbon surrogate blends

Mikhail A. Ershov et al.

Summary: The development of E30 fuel with an ethyl alcohol content of 20-40% has great potential for automotive technology without modifications. By blending bioethanol with low-octane hydrocarbon fractions, the antiknock performance can be significantly improved, offering promising economic parameters for fuel production.

FUEL PROCESSING TECHNOLOGY (2021)

Review Environmental Sciences

Technical insights into the production of green fuel from CO2 sequestered algal biomass: A conceptual review on green energy

Jayaseelan Arun et al.

Summary: Algae are a promising energy reserve for biofuel production due to their ability to sequester carbon dioxide efficiently. Hydrothermal liquefaction is the preferred mode for algae biomass conversion into biofuels, resulting in lower greenhouse gas emissions and higher energy value. This review highlights the potential of algae-based bioenergy for green energy and environmental impact evaluation.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Energy & Fuels

MODELLING INDUSTRIAL CATALYTIC REFORMING OF LOWOCTANE GASOLINE

D. A. Petrova et al.

Summary: Naphtha reforming is a crucial industrial process in refineries, producing aromatic hydrocarbons for gasoline additives. A mathematical model has been proposed to develop a new method for naphtha reforming, based on kinetic equations and industrial-scale conditions, validated by comparing results with industrial data.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2021)

Review Energy & Fuels

Recent trends for introducing promising fuel components to enhance the anti-knock quality of gasoline: A systematic review

Tamer M. M. Abdellatief et al.

Summary: Engineers and researchers aim to develop environmentally friendly high-octane gasoline by incorporating organic components to improve low-octane hydrocarbons, addressing global energy and environmental challenges.
Article Energy & Fuels

Experimental study the impacts of the key operating and design parameters on the cycle-to-cycle variations of the natural gas SI engine

Xiongbo Duan et al.

Summary: This study investigated the impacts of key operating and design parameters on the cycle-to-cycle variations in a high compression ratio SI natural gas engine under lean mixture conditions. The results showed that with increasing engine speed, there were fewer incomplete combustion cycles and the in-cylinder pressure distribution became more concentrated. Increasing load led to more concentrated pressure distribution and peak combustion pressure. Additionally, the relationship between peak combustion pressure and load was nearly linear, but increasing load caused the in-cylinder pressure traces to disperse slightly. Under low-load conditions, increasing compression ratio led to more concentrated pressure traces and fewer incomplete combustion cycles, while the effects were slight under high-load conditions.
Article Energy & Fuels

Blending Characteristics of Isooctene, MTBE, and TAME as Gasoline Components

M. A. Ershov et al.

ENERGY & FUELS (2020)

Article Energy & Fuels

Improving the Efficiency of the Gas Fractionation Unit of a Gasoline Stabilization Installation

S. M. Ledenev et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Energy & Fuels

Characteristics of Isohexene as a Novel Promising High-Octane Gasoline Booster

Mikhail A. Ershov et al.

ENERGY & FUELS (2020)

Review Chemistry, Physical

Carbon nanomaterials as friction modifiers in automotive engines: Recent progress and perspectives

Ankit Kotia et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Energy & Fuels

Possible Components for Increasing the Resources of Automobile Gasolines

E. A. Chernysheva et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Chemistry, Analytical

Corrosion evaluation of Aluminum 6061-T6 exposed to sugarcane bioethanol-gasoline blends using the Stockwell transform

C. I. Rocabruno-Valdes et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Article Green & Sustainable Science & Technology

Life-cycle energy use and greenhouse gas emissions of palm fatty acid distillate derived renewable diesel

H. Xu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Energy & Fuels

Furfural Derivatives as Fuel Components

P. A. Nikul'shin et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2020)

Article Green & Sustainable Science & Technology

Green diesel production from upgrading of cashew nut shell liquid

C. A. Scaldaferri et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Thermodynamics

Quantification of detergent-dispersant additives in gasoline by thermogravimetry

Amanda Pereira Franco dos Santos et al.

THERMOCHIMICA ACTA (2019)

Article Energy & Fuels

Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives

Mohamed Kamal Ahmed Ali et al.

APPLIED ENERGY (2018)

Article Thermodynamics

Passenger transportation sector gasoline consumption due to friction in Southeast Asian countries

W. W. F. Chong et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Review Green & Sustainable Science & Technology

Performance and emissions of straight vegetable oils and its blends as a fuel in diesel engine: A review

Sharzali Che Mat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Alcohol and ether as alternative fuels in spark ignition engine: A review

Omar I. Awad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Overview of the oxygenated fuels in spark ignition engine: Environmental and performance

Omar I. Awad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

A survey on modeling, biofuels, control and supervision systems applied in internal combustion engines

D. A. Carbot-Rojas et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Engineering, Chemical

Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation

Wael Abdelmoez et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2016)

Letter Green & Sustainable Science & Technology

Modeling of vehicle fuel consumption and carbon dioxide emission in road transport

Mehrsa Ehsani et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Engineering, Chemical

Green Approach for Biodiesel Production from Jojoba Oil Supported by Process Modeling and Simulation

Wael Abdelmoez et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2016)

Article Chemistry, Analytical

Determination of detergent and dispensant additives in gasoline by ring-oven and near infrared hypespectral imaging

Livia Rodrigues e Brito et al.

ANALYTICA CHIMICA ACTA (2015)

Review Green & Sustainable Science & Technology

An overview of methanol as an internal combustion engine fuel

Xudong Zhen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Review Green & Sustainable Science & Technology

A review of the combustion and emissions properties of advanced transportation biofuels and their impact on existing and future engines

Jeffrey M. Bergthorson et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Review Chemistry, Applied

Oleochemical Industry Future through Biotechnology

Wael Abdelmoez et al.

JOURNAL OF OLEO SCIENCE (2014)

Review Green & Sustainable Science & Technology

The impact of energy prices on the volatility of ethanol prices and the role of gasoline emissions

E. Zafeiriou et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Review Green & Sustainable Science & Technology

Internal combustion engines: Progress and prospects

Avinash Alagumalai

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Materials Science, Multidisciplinary

Effect of Water on the Corrosion Behavior of Mild Carbon Steel in E10 blend

Shaily M. Bhola et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)

Review Green & Sustainable Science & Technology

Effect of ethanol-gasoline blend on NOx emission in SI engine

B. M. Masum et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Review Green & Sustainable Science & Technology

Air emissions scenarios from ethanol as a gasoline oxygenate in Mexico City Metropolitan Area

Carlos A. Garcia et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Article Energy & Fuels

Improving the environmental and performance properties of automotive gasolines. Detergent additives

S. A. Karpov

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2007)

Article Energy & Fuels

Detergent additives to automotive gasolines

EA Nikitina et al.

CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS (2006)