相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Analytical Review of Life-Cycle Environmental Impacts of Carbon Capture and Utilization Technologies
Guillermo Garcia-Garcia et al.
CHEMSUSCHEM (2021)
Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach
A. E. Schwarz et al.
WASTE MANAGEMENT (2021)
Life-cycle assessment of an industrial direct air capture process based on temperature-vacuum swing adsorption
Sarah Deutz et al.
NATURE ENERGY (2021)
Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery
Harish Jeswani et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Achieving a circular bioeconomy for plastics Designing plastics for assembly and disassembly is essential to closing the resource loop
Sarah Kakadellis et al.
SCIENCE (2021)
The myth of historical bio-based plastics Early bio-based plastics, which were neither clean nor green, offer lessons for today
Rebecca Altman
SCIENCE (2021)
A binding global agreement to address the life cycle of plastics To eliminate plastic pollution, a holistic approach is needed
Nils Simon et al.
SCIENCE (2021)
Plastics in the Earth system
Aron Stubbins et al.
SCIENCE (2021)
The global threat from plastic pollution
Matthew MacLeo et al.
SCIENCE (2021)
Plastic ingestion as an evolutionary trap: Toward a holistic understanding
Robson G. Santos et al.
SCIENCE (2021)
Toward polymer upcycling-adding value and tackling circularity
LaShanda T. J. Korley et al.
SCIENCE (2021)
Sustainability footprints of a renewable carbon transition for the petrochemical sector within planetary boundaries
Angel Galan-Martin et al.
ONE EARTH (2021)
The Role of Carbon Capture and Utilization, Carbon Capture and Storage, and Biomass to Enable a Net-Zero-CO2 Emissions Chemical Industry
Paolo Gabrielli et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Rethinking chemistry for a circular economy
Klaus Kuemmerer et al.
SCIENCE (2020)
Designing for a green chemistry future
Julie B. Zimmerman et al.
SCIENCE (2020)
Degradation Rates of Plastics in the Environment
Ali Chamas et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Can biomass supply meet the demands of bioenergy with carbon capture and storage (BECCS)?
Michael B. Jones et al.
GLOBAL CHANGE BIOLOGY (2020)
Life cycle assessment of bio-based and fossil-based plastic: A review
S. Walker et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Evaluating scenarios toward zero plastic pollution
Winnie W. Y. Lau et al.
SCIENCE (2020)
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Stephanie B. Borrelle et al.
SCIENCE (2020)
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Fan Zhang et al.
SCIENCE (2020)
Towards a circular economy for plastic packaging wastes - the environmental potential of chemical recycling
Raoul Meys et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
The carbon footprint of the carbon feedstock CO2
Leonard Jan Mueller et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
CO2 capture from waste-to-energy plants: Techno-economic assessment of novel integration concepts of calcium looping technology
Martin Haaf et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe
Walter Leal Filho et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Climate change mitigation potential of carbon capture and utilization in the chemical industry
Arne Kaetelhoen et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Electrified methane reforming: A compact approach to greener industrial hydrogen production
Sebastian T. Wismann et al.
SCIENCE (2019)
Strategies to reduce the global carbon footprint of plastics
Jiajia Zheng et al.
NATURE CLIMATE CHANGE (2019)
Bark as feedstock for dual fluidized bed gasifiers-Operability, efficiency, and economics
Johan M. Ahlstroem et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)
Dual-Function Cobalt-Nickel Nanoparticles Tailored for High-Temperature Induction-Heated Steam Methane Reforming
Morten G. Vinum et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Negative emissions-Part 2: Costs, potentials and side effects
Sabine Fuss et al.
ENVIRONMENTAL RESEARCH LETTERS (2018)
Scenarios towards limiting global mean temperature increase below 1.5 °C
Joeri Rogelj et al.
NATURE CLIMATE CHANGE (2018)
Country-level social cost of carbon
Katharine Ricke et al.
NATURE CLIMATE CHANGE (2018)
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
Jens Artz et al.
CHEMICAL REVIEWS (2018)
Greenhouse gas mitigation for US plastics production: energy first, feedstocks later
I. Daniel Posen et al.
ENVIRONMENTAL RESEARCH LETTERS (2017)
Chemically recyclable polymers: a circular economy approach to sustainability
Miao Hong et al.
GREEN CHEMISTRY (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
A review of the catalytic hydrogenation of carbon dioxide into value-added hydrocarbons
Haiyan Yang et al.
CATALYSIS SCIENCE & TECHNOLOGY (2017)
Low-temperature oxidative coupling of methane in an electric field using carbon dioxide over Ca-doped LaAlO3 perovskite oxide catalysts
Tomohiro Yabe et al.
JOURNAL OF CO2 UTILIZATION (2017)
Production, use, and fate of all plastics ever made
Roland Geyer et al.
SCIENCE ADVANCES (2017)
Chemical recycling of waste plastics for new materials production
AliReza Rahimi et al.
NATURE REVIEWS CHEMISTRY (2017)
Stochastic Technology Choice Model for Consequential Life Cycle Assessment
Arne Kaetelhoen et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Selecting CO2 Sources for CO2 Utilization by Environmental-Merit-Order Curves
Niklas von der Assen et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Circular economy design considerations for research and process development in the chemical sciences
James H. Clark et al.
GREEN CHEMISTRY (2016)
The ecoinvent database version 3 (part I): overview and methodology
Gregor Wernet et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2016)
Environmental potential of carbon dioxide utilization in the polyurethane supply chain
Niklas von der Assen et al.
FARADAY DISCUSSIONS (2015)
Experimental study of methane dry reforming in an electrically heated reactor
Martin Rieks et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Plastic waste inputs from land into the ocean
Jenna R. Jambeck et al.
SCIENCE (2015)
Environmental potential of carbon dioxide utilization in the polyurethane supply chain
Niklas von der Assen et al.
FARADAY DISCUSSIONS (2015)
Bioenergy and climate change mitigation: an assessment
Felix Creutzig et al.
GLOBAL CHANGE BIOLOGY BIOENERGY (2015)
Promoting effect of Fe in oxidative dehydrogenation of ethylbenzene to styrene with CO2 (I) preparation and performance of Ce1 - xFexO2 catalyst
Qian Wang et al.
CATALYSIS COMMUNICATIONS (2014)
Biomass Gasification-Based Syngas Production for a Conventional Oxo Synthesis Plant-Process Modeling, Integration Opportunities, and Thermodynamic Performance
Maria Arvidsson et al.
ENERGY & FUELS (2014)
Impact of choice of CO2 separation technology on thermo-economic performance of Bio-SNG production processes
Stefan Heyne et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2014)
Parametric study of an efficient renewable power-to-substitute-natural-gas process including high-temperature steam electrolysis
Myriam De St Jean et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Carbon dioxide hydrogenation to aromatic hydrocarbons by using an iron/iron oxide nanocatalyst
Hongwang Wang et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2014)
A parametric modelling study for pressurised steam/O2-blown fluidised-bed gasification of wood with catalytic reforming
Ilkka Hannula et al.
BIOMASS & BIOENERGY (2012)
Integration of biomass gasification with a Scandinavian mechanical pulp and paper mill - Consequences for mass and energy balances and global CO2 emissions
Johan Isaksson et al.
ENERGY (2012)
Sustainability assessment of novel chemical processes at early stage: application to biobased processes
Akshay D. Patel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Energy Storage by CO2 Methanization and Energy Carrying Compounds: A Thermodynamic Comparison
Benjamin Mueller et al.
CHEMIE INGENIEUR TECHNIK (2011)
Economic and energetic analysis of capturing CO2 from ambient air
Kurt Zenz House et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)
A semi-empirical model for pressurised air-blown fluidised-bed gasification of biomass
Ilkka Hannula et al.
BIORESOURCE TECHNOLOGY (2010)
Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective
David Lazarevic et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Plastic waste as a fuel - CO2-neutral or not?
Ola Eriksson et al.
ENERGY & ENVIRONMENTAL SCIENCE (2009)
Decision framework for chemical process design including different stages environmental, health, and safety assessment
Hirokazu Sugiyama et al.
AICHE JOURNAL (2008)
Reducing industrial energy use and CO2 emissions:: The role of materials science
Dolf Gielen et al.
MRS BULLETIN (2008)
Producing bio-based bulk chemicals using industrial biotechnology saves energy and combats climate change
B. G. Hermann et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)
Establishing life cycle inventories of chemicals based on differing data availability
R Hischier et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2005)
Production of fine and speciality chemicals: Procedure for the estimation of LCIs
G Geisler et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2004)