☆ 4.7 Article

A gamma process based model for systems subject to multiple dependent competing failure processes under Markovian environments

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Reliability assessment and lifetime prediction of degradation processes considering recoverable shock damages

Tingting Huang et al.

Summary: This article proposes a degradation model for soft failure considering recoverable shock damages, aiming at reliability assessment and lifetime prediction of products. Instantaneous shocks can lead to incremental increases in degradation signals and degradation rates, however some products can partially or fully recover from shock damages. The impact of shocks on degradation rates is proportional to the shock size.

IISE TRANSACTIONS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Reliability analysis for multi-component systems with interdependent competing failure processes

Lina Bian et al.

Summary: This paper investigates two reliability models for multi-component systems affected by dependent competing failure processes, including soft failure and hard failure. Analytic forms of the reliability functions for the systems are derived using multivariate analysis technique.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Automation & Control Systems

Scheduling optimal replacement policies for a stochastically deteriorating system subject to two types of shocks

Wenjie Dong et al.

Summary: This paper investigates optimal preventive replacement policies for a single unit system subject to stochastic deterioration and external shocks. Two types of shocks are considered, leading to different system outcomes, and two categories of maintenance policies are scheduled based on analytical solutions. The relative gain on the optimal average maintenance cost rate is used to determine the more profitable policy, with theoretical results validated through an illustrative example.

ISA TRANSACTIONS (2021)

添加到收藏夹

Article Engineering, Industrial

A performance-based warranty for products subject to competing hard and soft failures

Xiaolin Wang et al.

Summary: This article examines a performance-based warranty for products with competing hard and soft failures, proposing three compensation policies: free replacement, penalty, and full refund. Numerical studies show that the full refund policy consistently results in the lowest total profit, while the free replacement policy can lead to higher total profit under certain conditions.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2021)

添加到收藏夹

Article Engineering, Industrial

Reliability analysis for a system experiencing dependent degradation processes and random shocks based on a nonlinear Wiener process model

Fuqiang Sun et al.

Summary: This paper presents a more general reliability model that considers competing failure modes in complex systems caused by degradation processes and random shocks. A nonlinear Wiener process model is used to characterize degradation behavior, and the impact of random shocks on degradation processes, as well as the impact of degradation processes on random shocks, is investigated. The time-varying copula method is utilized to characterize dependence among multiple failure processes.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

Reliability modeling and a statistical inference method of accelerated degradation testing with multiple stresses and dependent competing failure processes

Yao Liu et al.

Summary: This paper proposes a multiple stresses reliability model with dependent competing failure processes (DCFPs) by constructing multiple stresses acceleration model and deriving degradation-shock dependence competing model. A statistical inference method for accelerated degradation testing with multiple stresses and dependent competing failure processes is introduced. The practical example demonstrates the accuracy of the proposed model and method, and it is shown that reliability is lower with larger temperature, humidity, and more random shock due to larger mean of wear rate.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

Degradation modeling and remaining useful life prediction for dependent competing failure processes

Tao Yan et al.

Summary: This paper investigates the degradation modeling and remaining useful life (RUL) prediction for dependent competing failure processes (DCFPs). By formulating models for both soft and hard failure processes and addressing the offline estimation and online update of parameters, a new approach is proposed to tackle the challenges in RUL prediction.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Reliability Evaluation by a Dependent Competing Failure Model Including a Time-Varying Rate for Sudden Degradation Increments

Shuyuan Gan et al.

Summary: In this study, an effective dependent competing failure model is proposed for systems suffering from shocks, considering time-dependent rate for sudden degradation increments caused by shocks. Two dependent competing failure processes, soft failure and hard failure, are involved in the model, and the distribution of total sudden degradation increments is deduced and verified by Monte Carlo simulation. The proposed time-varying model effectively considers the impact of system degradation on sudden degradation increments and helps achieve more effective maintenance policies.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Reliability of repairable multi-state two-phase mission systems with finite number of phase switches

Bei Wu et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Optimum replacement policy for cumulative damage models based on multi-attributes

Shey-Huei Sheu et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Industrial

Reliability analysis of composite insulators subject to multiple dependent competing failure processes with shock duration and shock damage self-recovery

Xuefeng Kong et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Reliability analysis for complex systems subject to competing failure processes in an uncertain environment

Baoliang Liu et al.

JOURNAL OF INTELLIGENT & FUZZY SYSTEMS (2020)

添加到收藏夹

Article Operations Research & Management Science

Assessment of the maintenance cost and analysis of availability measures in a finite life cycle for a system subject to competing failures

N. C. Caballe et al.

OR SPECTRUM (2019)

添加到收藏夹

Article Mathematics, Applied

Reliability analysis under Marshall-Olkin run shock model

Murat Ozkut et al.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2019)

添加到收藏夹

Article Engineering, Industrial

Degradation modeling and condition-based maintenance of boiler heat exchangers using gamma processes

Michael E. Cholette et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Reliability modeling with condition-based maintenance for binary-state deteriorating systems considering zoned shock effects

Guanzhou Wei et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Industrial

Reliability and optimal replacement policy for an extreme shock model with a change point

Serkan Eryilmaz et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Engineering, Industrial

Optimization of on-condition thresholds for a system of degrading components with competing dependent failure processes

Nooshin Yousefi et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Management

Availability and optimal maintenance policy for systems degrading in dynamic environments

Jingyuan Shen et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2019)

添加到收藏夹

Article Engineering, Industrial

Extended Phase-type models for multistate competing risk systems

Lirong Cui et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Energy & Fuels

Coupling Analysis and Performance Study of Commercial 18650 Lithium-Ion Batteries under Conditions of Temperature and Vibration

Lijun Zhang et al.

ENERGIES (2018)

添加到收藏夹

Article Management

δ-shock model based on Polya process and its optimal replacement policy

Serkan Eryilmaz

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2017)

添加到收藏夹

Article Engineering, Industrial

Reliability assessment of competing risks with generalized mixed shock models

Koosha Rafiee et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An imperfect maintenance policy for mission-oriented systems subject to degradation and external shocks

Bin Liu et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Industrial

Modeling zoned shock effects on stochastic degradation in dependent failure processes

Lei Jiang et al.

IIE TRANSACTIONS (2015)

添加到收藏夹

Article Engineering, Industrial

A new class of Wiener process models for degradation analysis

Zhi-Sheng Ye et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature

Feng Leng et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Physical

A comparative study of commercial lithium ion battery cycle life in electrical vehicle: Aging mechanism identification

Xuebing Han et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Engineering, Industrial

Reliability and maintenance modeling for systems subject to multiple dependent competing failure processes

Hao Peng et al.

IIE TRANSACTIONS (2011)

添加到收藏夹

Review Engineering, Industrial

A survey of the application of gamma processes in maintenance

J. M. van Noortwijk

RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)

添加到收藏夹

Article Mathematics, Applied

Numerical inversion of 2-D Laplace transforms applied to fractional diffusion equations

PP Valkó et al.

APPLIED NUMERICAL MATHEMATICS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.