期刊
RAPID PROTOTYPING JOURNAL
卷 28, 期 4, 页码 704-715出版社
EMERALD GROUP PUBLISHING LTD
DOI: 10.1108/RPJ-04-2021-0084
关键词
3D printing; Bonding; Cooling; Build orientation; Fused filament fabrication FFF
资金
- FCT Portuguese Foundation for Science and Technology [UIDB/05256/2020, UIDP/05256/2020, UIDB/04728/2020]
The performance of parts obtained by fused filament fabrication (FFF) is heavily influenced by the bonding between adjacent filaments. This bonding is affected by the properties of the polymer material, temperature of the filaments, and time required for molecular diffusion. A computational thermal model was used to predict the influence of build orientation on bonding, with extrusion and build chamber temperature being major process parameters.
Purpose The performance of the parts obtained by fused filament fabrication (FFF) is strongly dependent on the extent of bonding between adjacent filaments developing during the deposition stage. Bonding depends on the properties of the polymer material and is controlled by the temperature of the filaments when they come into contact, as well as by the time required for molecular diffusion. In turn, the temperature of the filaments is influenced by the set of operating conditions being used for printing. This paper aims at predicting the degree of bonding of realistic 3D printed parts, taking into consideration the various contacts arising during its fabrication, and the printing conditions selected. Design/methodology/approach A computational thermal model of filament cooling and bonding that was previously developed by the authors is extended here, to be able to predict the influence of the build orientation of 3D printed parts on bonding. The quality of a part taken as a case study is then assessed in terms of the degree of bonding, i.e. the percentage of volume exhibiting satisfactory bonding between contiguous filaments. Findings The complexity of the heat transfer arising from the changes in the thermal boundary conditions during deposition and cooling is well demonstrated for a case study involving a realistic 3D part. Both extrusion and build chamber temperature are major process parameters. Originality/value The results obtained can be used as practical guidance towards defining printing strategies for 3D printing using FFF. Also, the model developed could be directly applied for the selection of adequate printing conditions.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据