相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Feasibility of steel powder deposition on composites through cold spray
Roberta Della Gatta et al.
MATERIALS AND MANUFACTURING PROCESSES (2021)
Improved corrosion resistance of AZ91D magnesium alloy coated by novel cold-sprayed Zn-HA/Zn double-layer coatings
Hai-Long Yao et al.
CERAMICS INTERNATIONAL (2020)
In-vitro comparison of hydroxyapatite coatings obtained by cold spray and conventional thermal spray technologies
A. M. Vilardell et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Microstructure and bioactivity of a cold sprayed rough/porous Ta coating on Ti6Al4V substrate
Tang JunRong et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
Mechanical, Biological, and Antibacterial Characteristics of Plasma-Sprayed (Sr,Zn) Substituted Hydroxyapatite Coating
Ihsan Ullah et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Decoration of Material Surfaces with Complex Physicochemical Signals for Biointerface Applications
Yue Shi et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Antifibrotic strategies for medical devices
Nicholas G. Welch et al.
ADVANCED DRUG DELIVERY REVIEWS (2020)
Recent Developments and Practical Feasibility of Polymer-Based Antifouling Coatings
Anna M. C. Maan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Understanding the Antipathogenic Performance of Nanostructured and Conventional Copper Cold Spray Material Consolidations and Coated Surfaces
Bryer C. Sousa et al.
CRYSTALS (2020)
Is copper beneficial for COVID-19 patients?
Syamal Raha et al.
MEDICAL HYPOTHESES (2020)
Development of hybrid metallic coatings on carbon fiber-reinforced polymers (CFRPs) by cold spray deposition of copper-assisted copper electroplating process
Panteha Fallah et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Enhanced corrosion resistance and surface bioactivity of AZ31B Mg alloy by high pressure cold sprayed monolayer Ti and bilayer Ta/Ti coatings in simulated body fluid
M. Daroonparvar et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Microscopic visualization of cell - Cold sprayed bio-coating interfaces: An intermediate layer formed during the culturing mediates the behaviors of the cells
Yi Liu et al.
APPLIED SURFACE SCIENCE (2020)
Sars-CoV-2 (COVID-19) inactivation capability of copper-coated touch surface fabricated by cold-spray technology
Novana Hutasoit et al.
MANUFACTURING LETTERS (2020)
Overview of cold spray coatings applications and comparisons: a critical review
Santosh Kumar et al.
WORLD JOURNAL OF ENGINEERING (2020)
Feasibility of using low pressure cold gas spray for the spraying of thick ceramic hydroxyapatite coatings
Anna M. Vilardell et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)
Strengthened Peening Effect on Metallurgical Bonding Formation in Cold Spray Additive Manufacturing
Yingchun Xie et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Corrosion resistance and antibacterial properties of copper coating deposited by cold gas spray
F. S. da Silva et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Surface Modification to Improve Properties of Materials
Miran Mozetic
MATERIALS (2019)
Mechanical and biological properties of ZnO, SiO2, and Ag2O doped plasma sprayed hydroxyapatite coating for orthopaedic and dental applications
Ashley A. Vu et al.
ACTA BIOMATERIALIA (2019)
Beyond Traditional Coatings: A Review on Thermal-Sprayed Functional and Smart Coatings
D. Tejero-Martin et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Bioactive Materials: A Comprehensive Review on Interactions with Biological Microenvironment Based on the Immune Response
Shirin Nour et al.
JOURNAL OF BIONIC ENGINEERING (2019)
Coating Techniques for Functional Enhancement of Metal Implants for Bone Replacement: A Review
Amir Dehghanghadikolaei et al.
MATERIALS (2019)
A manufacturing and annealing protocol to develop a cold-sprayed Fe-316L stainless steel biodegradable stenting material
Jennifer Frattolin et al.
ACTA BIOMATERIALIA (2019)
Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications
Jordi Guillem-Marti et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications
Nicolas Soro et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray
M. R. Rokni et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Egg-White-/Eggshell-Based Biomimetic Hybrid Hydrogels for Bone Regeneration
Keqing Huang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Bio-active glass coatings manufactured by thermal spray: a status report
John Henao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying
D. Q. Pham et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Optimization Adhesion in Cold Spraying onto Hard Substrates: A Case Study for Brass Coatings
Stephan Theimer et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Effects of acid-alkali treatment on bioactivity and osteoinduction of porous titanium: An in vitro study
Yi-tong Yao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Preparation of titania coating by induction suspension plasma spraying for biomedical application
Wenxin Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructural investigation of porous titanium coatings, produced by thermal spraying techniques, using plasma atomization and hydride-dehydride powders, for orthopedic implants
P. Gkomoza et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP)
V. Gillet et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Multifunctional Coatings and Nanotopographies: Toward Cell Instructive and Antibacterial Implants
Carlos Mas-Moruno et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Antimicrobial properties of a novel copper-based composite coating with potential for use in healthcare facilities
David A. Montero et al.
ANTIMICROBIAL RESISTANCE AND INFECTION CONTROL (2019)
Prospects of Low-Pressure Cold Spray for Superhydrophobic Coatings
Anna Gibas et al.
COATINGS (2019)
Techniques to Investigate the Application of Cold Spray in Fabrication of Nanoplasmonic films: Parameter Identification
Kando Hamiyanze Moonga et al.
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019) (2019)
Magnetostrictive Cold Spray Sensor for Harsh Environment and Long-Term Condition Monitoring
S. W. Glass et al.
45TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 38 (2019)
Superhydrophobicity: advanced biological and biomedical applications
Karim Khanmohammadi Chenab et al.
BIOMATERIALS SCIENCE (2019)
Cold spray deposition to prevent fouling of polymer surfaces
C. Stenson et al.
SURFACE ENGINEERING (2018)
Current methods of preventing aseptic loosening and improving osseointegration of titanium implants in cementless total hip arthroplasty: a review
Dragos Apostu et al.
JOURNAL OF INTERNATIONAL MEDICAL RESEARCH (2018)
Antimicrobial and Antifouling Strategies for Polymeric Medical Devices
Zachary K. Zander et al.
ACS MACRO LETTERS (2018)
Fabrication of sensitive bioelectrode based on atomically thin CVD grown graphene for cancer biomarker detection
Vijay K. Singh et al.
BIOSENSORS & BIOELECTRONICS (2018)
Flexible spray coating process for smooth nanocellulose film production
Kirubanandan Shanmugam et al.
CELLULOSE (2018)
HA/β-TCP plasma sprayed coatings on Ti substrate for biomedical applications
Rahul Sasidharan Pillai et al.
CERAMICS INTERNATIONAL (2018)
Collagen as Coating Material for 45S5 Bioactive Glass-Based Scaffolds for Bone Tissue Engineering
Jasmin Hum et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Releasing kinetics of dissolved copper and antifouling mechanism of cold sprayed copper composite coatings for submarine screen doors of ships
Ding Rui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Staphylococcus aureus and Staphylococcus epidermidis infections on implants
W. F. Oliveira et al.
JOURNAL OF HOSPITAL INFECTION (2018)
Influence of Surface Pretreatment on the Corrosion Resistance of Cold-Sprayed Nickel Coatings in Acidic Chloride Solution
Mieczyslaw Scendo et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Osteoblastic cell response on high-rough titanium coatings by cold spray
A. M. Vilardell et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Microstructure and Transparent Super-Hydrophobic Performance of Vacuum Cold-Sprayed Al2O3 and SiO2 Aerogel Composite Coating
Jie Li et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Influence of Impact Conditions on Feedstock Deposition Behavior of Cold-Sprayed Fe-Based Metallic Glass
Constance W. Ziemian et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Corrosion Resistance Evaluation of HVOF Produced Hydroxyapatite and Ti0(2)hydroxyapatite Coatings in Hanks' Solution
Hortensia Correas Melero et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2018)
Functionalized coatings by cold spray: An in vitro study of micro- and nanocrystalline hydroxyapatite compared to porous titanium
A. M. Vilardell et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Microwave assisted coating of bioactive amorphous magnesium phosphate (AMP) on polyetheretherketone (PEEK)
Yufu Ren et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Optimization and characterization of electrospun polycaprolactone coated with gelatin-silver nanoparticles for wound healing application
Tra Thanh Nhi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Production of Annealed Cold-Sprayed 316L Stainless Steel Coatings for Biomedical Applications and Their in-vitro Corrosion Response
Burak Dikici et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2018)
Metallization of polyether ether ketone (PEEK) by copper coating via cold spray
Chaoyue Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Influence of feedstock powder and cold spray processing parameters on microstructure and mechanical properties of Ti-6Al-4V cold spray depositions
Venkata Satish Bhattiprolu et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructure and Mechanical Properties of Zn-Ni-Al2O3 Composite Coatings
Yang Bai et al.
MATERIALS (2018)
Cold-Sprayed Metal Coatings with Nanostructure
Shuo Yin et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Porous PEEK improves the bone-implant interface compared to plasma-sprayed titanium coating on PEEK
F. Brennan Torstrick et al.
BIOMATERIALS (2018)
Atomic layer deposition for biosensing applications
Octavio Graniel et al.
BIOSENSORS & BIOELECTRONICS (2018)
Highly durable and biocompatible periodical Si/DLC nanocomposite coatings
Oleksiy V. Penkov et al.
NANOSCALE (2018)
A new double-layer hydroxyapatite/alumina-silica coated titanium implants using plasma spray technique
N. Ebrahimi et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants
Laila Damiati et al.
JOURNAL OF TISSUE ENGINEERING (2018)
Medicine Meets Thermal Spray Technology: A Review of Patents
J. Cizek et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Thermal Oxidation of Cold Sprayed Titanium-Based Coating Deposited on Co-Cr Alloy
Dogukan Cetiner et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Effect of Feedstock Powder Morphology on Cold-Sprayed Titanium Dioxide Coatings
H. Hajipour et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Analysis of Corrosion Behavior and Surface Properties of Plasma-Sprayed HA/Ta Coating on CoCr Alloy
Balraj Singh et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
HVOF Hydroxyapatite/Titania-Graded Coatings: Microstructural, Mechanical, and In Vitro Characterization
J. Henao et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
First Results of a New Vacuum Plasma Sprayed (VPS) Titanium-Coated Carbon/PEEK Composite Cage for Lumbar Interbody Fusion
Sven Hoppe et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)
Bioactive inorganic/organic nanocomposites for wound healing
Xiaocheng Wang et al.
APPLIED MATERIALS TODAY (2018)
Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
D. MacDonald et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Antifouling and Antimicrobial Coatings from Zwitterionic and Cationic Binary Polymer Brushes Assembled via Click Reactions
Gang Xu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Chitosan as a bioactive polymer: Processing, properties and applications
A. Muxika et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)
Cold Spray Coating of Submicronic Ceramic Particles on Poly(vinyl alcohol) in Dry and Hydrogel States
David Moreau et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Plasma-Sprayed Ti6Al4V Alloy Composite Coatings Reinforced with In Situ Formed TiB-TiN
Akrity Anand et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Cold Sprayability of Mixed Commercial Purity Ti Plus Ti6Al4V Metal Powders
Huseyin Aydin et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray
M. R. Rokni et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Colonization of Bacteria on the Surfaces of Cold-Sprayed Copper Coatings Alters Their Electrochemical Behaviors
Xinkun Suo et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Cold sprayed metal-ceramic coatings using satellited powders
K. S. Al-Hamdani et al.
MATERIALS LETTERS (2017)
Development of a bioactive glass-polymer composite for wound healing applications
D. Moura et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Advances in piezoelectric thin films for acoustic biosensors, acoustofluidics and lab-on-chip applications
Y. Q. Fu et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Influence of cold spray parameters on the microstructures and residual stress of Zn coatings sprayed on mild steel
N. B. Maledi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Room-temperature deposition of hydroxyapatite/antibiotic composite coatings by vacuum cold spraying for antibacterial applications
Deyan Li et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Ti surface modification by cold spraying with TiO2 microparticles
Kilian Schmidt et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Carbon steel corrosion: a review of key surface properties and characterization methods
Deepak Dwivedi et al.
RSC ADVANCES (2017)
Osseoconductive and Corrosion-Inhibiting Plasma-Sprayed Calcium Phosphate Coatings for Metallic Medical Implants
Robert B. Heimann
METALS (2017)
Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Ana Civantos et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Ana Civantos et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review
Sunil Pathak et al.
COATINGS (2017)
Synthesis and Vacuum Cold Spray Deposition of Biofunctionalized Nanodiamond/Hydroxyapatite Nanocomposite for Biomedical Applications
Deyan Li et al.
ADVANCED ENGINEERING MATERIALS (2017)
Novel Approach in the Use of Plasma Spray: Preparation of Bulk Titanium for Bone Augmentations
Michaela Fousova et al.
MATERIALS (2017)
Insight of magnesium alloys and composites for orthopedic implant applications - a review
R. Radha et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Identifying the optimal HVOF spray parameters to attain minimum porosity and maximum hardness in iron based amorphous metallic coatings
S. Vignesh et al.
DEFENCE TECHNOLOGY (2017)
Multifunctional Coating Based on Hyaluronic Acid and Dopamine Conjugate for Potential Application on Surface Modification of Cardiovascular Implanted Devices
Feng Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) yields better Hydrolytical Stability of Biocompatible SiOx Thin Films on Implant Alumina Ceramics compared to Rapid Thermal Evaporation Physical Vapor Deposition (PVD)
Frederik Boeke et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants
Jordan Raphel et al.
BIOMATERIALS (2016)
Antifouling coatings made with Cold Spray onto polymers: Process characterization
R. Lupoi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
The unique abilities of cold spray deposition
V. Champagne et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
A review on conducting polymer coatings for corrosion protection
Murat Ates
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2016)
A New Alternative for Obtaining Nanocrystalline Bioactive Coatings: Study of Hydroxyapatite Deposition Mechanisms by Cold Gas Spraying
Nuria Cinca et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
A review of hydroxyapatite-based coating techniques: Sol-gel and electrochemical depositions on biocompatible metals
R. I. M. Asri et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Plasma-Sprayed Hydroxylapatite-Based Coatings: Chemical, Mechanical, Microstructural, and Biomedical Properties
Robert B. Heimann
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-Sprayed Tantalum Coatings
S. Kumar et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
A Review of Thermal Spray Metallization of Polymer-Based Structures
R. Gonzalez et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
The 2016 Thermal Spray Roadmap
Armelle Vardelle et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Antifouling and Antibacterial Multifunctional Polyzwitterion/Enzyme Coating on Silicone Catheter Material Prepared by Electrostatic Layer-by-Layer Assembly
Anne Vaterrodt et al.
LANGMUIR (2016)
Optimizing surface characteristics for cell adhesion and proliferation on titanium plasma spray coatings on polyetheretherketone
Byung Jo Victor Yoon et al.
SPINE JOURNAL (2016)
Influence of substrate roughness on bonding mechanism in cold spray
S. Kumar et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Antimicrobial silver-hydroxyapatite composite coatings through two-stage electrochemical synthesis
Cong Fu et al.
SURFACE & COATINGS TECHNOLOGY (2016)
316L stainless steel coatings on ZE41 magnesium alloy using HVOF thermal spray for corrosion protection
S. Garcia-Rodriguez et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Effects of remelting processes on porosity of NiCrBSi flame sprayed coatings
M. R. Karimi et al.
SURFACE ENGINEERING (2016)
Antibacterial Metallic Touch Surfaces
Victor M. Villapun et al.
MATERIALS (2016)
Surface Treatments and Functional Coatings for Biocompatibility Improvement and Bacterial Adhesion Reduction in Dental Implantology
Pietro Mandracci et al.
COATINGS (2016)
Development of a Novel Biodegradable Metallic Stent Based on Microgalvanic Effect
Jennifer Frattolin et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
MICROSTRUCTURE AND CORROSION RESISTANCE OF ALUMINIUM AND COPPER COMPOSITE COATINGS DEPOSITED BY LPCS METHOD
M. Winicki et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art
A. M. Vilardell et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Plasma-sprayed titanium coating to polyetheretherketone improves the bone-implant interface
William R. Walsh et al.
SPINE JOURNAL (2015)
Strong effect of carrier gas species on particle velocity during cold spray processes
Xinkun Suo et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Cold spray deposition of hydroxyapatite powder onto magnesium substrates for biomaterial applications
M. Hasniyati et al.
SURFACE ENGINEERING (2015)
Critical review of corrosion protection by cold spray coatings
S. M. Hassani-Gangaraj et al.
SURFACE ENGINEERING (2015)
Antibacterial Coatings: Challenges, Perspectives, and Opportunities
M. Cloutier et al.
TRENDS IN BIOTECHNOLOGY (2015)
Antibacterial coating of implants in orthopaedics and trauma: a classification proposal in an evolving panorama
Carlo Luca Romano et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2015)
Effect of Surface Preparation on the Microstructure, Adhesion, and Tensile Properties of Cold-Sprayed Aluminum Coatings on AA2024 Substrates
M. M. Sharma et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)
Optimisation of the high velocity oxygen fuel (HVOF) parameters to produce effective corrosion control coatings on AZ91 magnesium alloy
C. Taltavull et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Biological response to prosthetic debris
Diana Bitar et al.
WORLD JOURNAL OF ORTHOPEDICS (2015)
Assessing the antifouling properties of cold-spray metal embedment using loading density gradients of metal particles
M. J. Vucko et al.
BIOFOULING (2014)
Current Strategies to Improve the Bioactivity of PEEK
Rui Ma et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Conducting polymers for corrosion protection: a review
Pravin P. Deshpande et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
45S5 bioactive glass coatings by atmospheric plasma spraying obtained from feedstocks prepared by different routes
Veronica Lopez Calvo et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Stainless Steel 316L Coatings Produced by Cold Spray for Biomedical Applications
Bandar AL-Mangour et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Effects of surface coating on reducing friction and wear of orthopaedic implants
Hee Ay Ching et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)
Significant influence of carrier gas temperature during the cold spray process
S. Yin et al.
SURFACE ENGINEERING (2014)
Cold spray coating: review of material systems and future perspectives
A. Moridi et al.
SURFACE ENGINEERING (2014)
Emerging rules for effective antimicrobial coatings
Mario Salwiczek et al.
TRENDS IN BIOTECHNOLOGY (2014)
EFFECT OF GAS PRESSURE AND TEMPERATURE ON STEREOMETRIC PROPERTIES OF Al+Al2O3 COMPOSITE COATINGS DEPOSITED BY LPCS METHOD
M. Winnicki et al.
ARCHIVES OF METALLURGY AND MATERIALS (2014)
In vitro and in vivo evaluation of the bioactivity of hydroxyapatite-coated polyetheretherketone biocomposites created by cold spray technology
Jae Hyup Lee et al.
ACTA BIOMATERIALIA (2013)
Designing implant surface topography for improved biocompatibility
Alison G. Harvey et al.
EXPERT REVIEW OF MEDICAL DEVICES (2013)
Hydroxyapatite-Coated Magnesium-Based Biodegradable Alloy: Cold Spray Deposition and Simulated Body Fluid Studies
Abdullah C. W. Noorakma et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Development of cold spray from innovation to emerging future coating technology
Harminder Singh et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2013)
Effect of Particle Morphology and Size Distribution on Cold-Sprayed Pure Titanium Coatings
W. Wong et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Cold Spray Coating Deposition Mechanism on the Thermoplastic and Thermosetting Polymer Substrates
Amirthan Ganesan et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Cold gas spray titanium coatings onto a biocompatible polymer
M. Gardon et al.
MATERIALS LETTERS (2013)
Embedment of copper particles into polymers by cold spray
Peter C. King et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Development of WC-based metal matrix composite coatings using low-pressure cold gas dynamic spraying
N. M. Melendez et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Antibacterial surfaces: the quest for a new generation of biomaterials
Jafar Hasan et al.
TRENDS IN BIOTECHNOLOGY (2013)
Bacterial Biofilms: Development, Dispersal, and Therapeutic Strategies in the Dawn of the Postantibiotic Era
Maria Kostakioti et al.
COLD SPRING HARBOR PERSPECTIVES IN MEDICINE (2013)
A demonstration of the antimicrobial effectiveness of various copper surfaces
Victor K. Champagne et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2013)
A review on the assessment of polymeric materials used as corrosion inhibitor of metals and alloys
David Ebuka Arthur et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY (2013)
Cold spray metal embedment: an innovative antifouling technology
M. J. Vucko et al.
BIOFOULING (2012)
Corrosion behaviour of cold sprayed titanium coatings in simulated body fluid
X. Zhou et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2012)
Surface characteristics and biocompatibility of sandblasted and acid-etched titanium surface modified by ultraviolet irradiation: An in vitro study
Shaobing Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
High-Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications
N. Stiegler et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
High Pressure Cold Sprayed (HPCS) and Low Pressure Cold Sprayed (LPCS) Coatings Prepared from OFHC Cu Feedstock: Overview from Powder Characteristics to Coating Properties
Heli Koivuluoto et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
Host Bone Response to Polyetheretherketone Versus Porous Tantalum Implants for Cervical Spinal Fusion in a Goat Model
Sarina K. Sinclair et al.
SPINE (2012)
The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings
K. Spencer et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Cold spray technology: future of coating deposition processes
Harminder Singh et al.
FRATTURA ED INTEGRITA STRUTTURALE (2012)
The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation
Rolando A. Gittens et al.
BIOMATERIALS (2011)
Flame Spray Deposition of Titanium Alloy-Bioactive Glass Composite Coatings
G. M. Nelson et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)
On Parameter Selection in Cold Spraying
H. Assadi et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)
Powder stream characteristics in cold spray nozzles
R. Lupoi et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Optimization and Characterization of High Velocity Oxy-fuel Sprayed Coatings: Techniques, Materials, and Applications
Maria Oksa et al.
COATINGS (2011)
Relationship between particle size and deformation in the cold spray process
Peter C. King et al.
APPLIED SURFACE SCIENCE (2010)
Biomimetic coatings for bone tissue engineering of critical-sized defects
Yuelian Liu et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying
Saden H. Zahiri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Inorganic antimicrobial coating for titanium alloy and its effect on bacteria
Katsuya Tamai et al.
JOURNAL OF ORTHOPAEDIC SCIENCE (2009)
Corrosion Properties of Cold-Sprayed Tantalum Coatings
Heli Koivuluoto et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)
Antibacterial Property of Cold Sprayed Chitosan-Cu/Al Coating
Noppakun Sanpo et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)
Influence of Ceramic Powder Size on Process of Cermet Coating Formation by Cold Spray
A. Sova et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)
Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment
F. Yildiz et al.
WEAR (2009)
Review on Cold Spray Process and Technology: Part I-Intellectual Property
Eric Irissou et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)
Effect of standoff distance on coating deposition characteristics in cold spraying
W. -Y. Li et al.
MATERIALS & DESIGN (2008)
Effect of gas pressure on Al coatings by cold gas dynamic spray
H. Lee et al.
MATERIALS LETTERS (2008)
Advanced biomaterials for skeletal tissue regeneration:: Instructive and smart functions
F. Barrere et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2008)
Warm spraying-a novel coating process based on high-velocity impact of solid particles
Seiji Kuroda et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2008)
Standoff distance and bow shock phenomena in the Cold Spray process
J. Pattison et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Ti and Ti-6Al-4V coatings by cold spraying and microstructure modification by heat treatment
Wen-Ya Li et al.
ADVANCED ENGINEERING MATERIALS (2007)
Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review
R. S. Lima et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
The design and manufacture of biomedical surfaces
J. J. Ramsden et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Thermal spraying of biomaterials
Robert B. Heimann
SURFACE & COATINGS TECHNOLOGY (2006)
Critical particle velocity under cold spray conditions
Francois Raletz et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Dense titanium coatings by modified HVOF spraying
Jin Kawakita et al.
SURFACE & COATINGS TECHNOLOGY (2006)
The cold spray process and its potential for industrial applications
Frank Gaertner et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2006)
Development of a generalized parameter window for cold spray deposition
T Schmidt et al.
ACTA MATERIALIA (2006)
Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications
CC Shih et al.
CORROSION SCIENCE (2004)
Understanding plasma spraying
P Fauchais
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2004)
High-pressure plasma spraying of hydroxyapatite powders
V Guipont et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy
D Starosvetsky et al.
BIOMATERIALS (2001)
Biomedical applications of polymer-composite materials: a review
S Ramakrishna et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
分享论文
