相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Process conditions optimization for the fabrication of highly porous activated carbon from date palm bark wastes for removing pollutants from water
Mohammad Reza Haghbin et al.
POWDER TECHNOLOGY (2021)
Sensitivity analysis of process parameters for granular mixing in an intensive mixer using response surface methodology
Zhijian Zuo et al.
POWDER TECHNOLOGY (2021)
Structural, mechanical and tribological properties of Cu-ZrO2/GNPs hybrid nanocomposites
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2020)
Experimental investigation on the mechanical, structural and thermal properties of Cu-ZrO2 nanocomposites hybridized by graphene nanoplatelets
M. S. Abd-Elwahed et al.
CERAMICS INTERNATIONAL (2020)
Optimization of reactive extraction of propionic acid with ionic liquids using central composite design
Emine Ayan et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)
An experimental and numerical investigation of forced convection in high porosity aluminum foams subjected to jet array impingement in channel-flow
Prashant Singh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Numerical investigation of nanofluid laminar forced convection heat transfer between two horizontal concentric cylinders in the presence of porous medium
Xinglong Liu et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
MHD forced convection of nanofluid flow in an open-cell metal foam heatsink under LTNE conditions
Aliakbar Izadi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Neck growth kinetics during ultrasonic-assisted sintering of copper powder
Gurminder Singh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)
Immersion cooling effect of dielectric liquid and self-rewetting fluid on smooth and porous surface
Pin Chen et al.
APPLIED THERMAL ENGINEERING (2020)
Optimization of the powder state to enhance the enrichment of functional mung bean protein concentrates obtained by dry separation
Hong-Guang Zhu et al.
POWDER TECHNOLOGY (2020)
Effect of Process Parameters on the Electrodeposition of Zinc on 1010 Steel: Central Composite Design Optimization
Mehmet Kul et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)
Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting
J. Y. Ho et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Enhancement of pool boiling heat transfer in water on aluminum surface with high temperature conductive microporous coating
Juan C. Godinez et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite
Ahmed Abu-Oqail et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A novel hybrid thermal management for Li-ion batteries using phase change materials embedded in copper foams combined with forced-air convection
Mehdi Mehrabi-Kermani et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Experimental study on tribological properties of Cu-Al2O3 nanocomposite hybridized by graphene nanoplatelets
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2019)
Effect of GNPs content on thermal and mechanical properties of a novel hybrid Cu-Al2O3/GNPs coated Ag nanocomposite
A. Wagih et al.
CERAMICS INTERNATIONAL (2019)
Effect of flow regime on convective heat transfer in porous copper manufactured by lost carbonate sintering
Xianke Lu et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2019)
Effects of new methods of porosity arrangement on forced convection in a variable BDPM using numerical simulation
Behnam Rajabzadeh et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Numerical simulation of heat transfer in metal foams
Priyatham Gangapatnam et al.
HEAT AND MASS TRANSFER (2018)
Numerical simulation of heat sink cooling in the mainboard chip of a computer with temperature dependent thermal conductivity
Mohsen Zaretabar et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental investigation of heat transfer and pressure drop of alumina-water nano-fluid in a porous miniature heat sink
E. Pourfarzad et al.
EXPERIMENTAL HEAT TRANSFER (2018)
Geometric Mean of Fin Efficiency and Effectiveness: A Parameter to Determine Optimum Length of Open-Cell Metal Foam Used as Extended Heat Transfer Surface
Tisha Dixit et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)
Preparation of novel copper-powder-sintered frame/paraffin form-stable phase change materials with extremely high thermal conductivity
Zongtao Li et al.
APPLIED ENERGY (2017)
Microindentation on the porous copper surface modulations
Dursun Ekmekci et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)
Pool boiling heat transfer of porous structures with reentrant cavities
Daxiang Deng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Effect of structural parameters on pool boiling heat transfer for porous interconnected microchannel nets
Yong Tang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Three-Dimensional Porous Copper-Graphene Heterostructures with Durability and High Heat Dissipation Performance
Hokyun Rho et al.
SCIENTIFIC REPORTS (2015)
Experimental study of evaporative heat transfer in sintered powder structures at low superheat levels
Yao-Yang Tsai et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
Powder Geometry Based Models for Sintered Media Porosity and Effective Thermal Conductivity
Juan Pablo M. Florez et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2014)
Air forced convection through metal foams: Experimental results and modeling
Simone Mancin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Effect of the pore shape on the thermal conductivity of porous media
J. Ordonez-Miranda et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Effect of porosity on the thermal conductivity of copper processed by powder metallurgy
C. Vincent et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2012)
Microscale-modulated porous coatings: fabrication and pool-boiling heat transfer performance
Oemer Necati Cora et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
2-D and 3-D modulated porous coatings for enhanced pool boiling
D. H. Min et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Prediction of density, porosity and hardness in aluminum-copper-based composite materials using artificial neural network
Adel Mahamood Hassan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Micro-manufacturing of micro-scale porous surface structures for enhanced heat transfer applications: an experimental process optimization study
Oemer N. Cora et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Fabrication of high aspect ratio porous microfeatures using hot compaction technique
Peng Chen et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Investigations on thermo-mechanical fabrication of micro-scale porous surface features
Mummer Koc et al.
JOURNAL OF POWER SOURCES (2008)
Theoretical consideration of the effect of porosity on thermal conductivity of porous materials
Iwan Sumirat et al.
JOURNAL OF POROUS MATERIALS (2006)
Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
Z Horita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Effect of porosity on thermal conductivity of Al-Si-Fe-X alloy powder compacts
KY Sastry et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2004)
Influence of consolidation parameters on the microstructure and hardness of bulk copper samples made from nanopowders
TS Srivatsan et al.
MATERIALS & DESIGN (2002)
Pool-boiling CHF enhancement by modulated porous-layer coating: theory and experiment
SG Liter et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Microstructural evolution, microhardness and thermal stability of HPT-processed Cu
HG Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Forced convection in high porosity metal foams
VV Calmidi et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2000)