☆ 4.7 Article

CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective

POWDER TECHNOLOGY (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Numerical and experimental investigations of instability in a spouted bed with non-spherical particles

Tianyu Wang et al.

Summary: The instability of a spouted bed containing non-spherical particles was investigated both numerically and experimentally. Conditions that created an S-shaped gas channel in the center of the bed proved the instability of non-spherical particles. The study also revealed that the granular temperature distribution of the particles and bubbles was associated with the gas channel region.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Gas-solid mixing and heat transfer performance in alternating spout deflection

Yuanhe Yue et al.

Summary: In this study, the alternating spout deflection (ASD) is compared with the spout-fluidisation (SF) flow pattern in terms of gas-solid hydrodynamics, mixing, and heat transfer performance using a Computer Fluid Dynamic-Discrete Element Method (CFDDEM) model. The ASD shows advantages in terms of particle packing state, mixing performance, and heat transfer efficiency compared to SF.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Exploring mechanism of spout deflection in a spout fluidized bed

Yuanhe Yue et al.

Summary: Two hypotheses were proposed to explain spout deflection mechanisms in spout fluidized beds, and virtual experiments were designed to verify these hypotheses. The study found that asymmetrical particle fountaining and rheological properties of the annulus region play key roles in determining spout deflection.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Direct numerical simulation of incompressible multiphase flow with vaporization using moving particle semi-implicit method

Xiaoxing Liu et al.

Summary: In this paper, a moving particle semi-implicit (MPS) method is developed for simulating multiphase incompressible flows with mass transfer due to vaporization. The method considers variable particle volume and introduces particle splitting technique to avoid large volume difference among particles. A source term for mass transfer rate in vaporization process is developed in the pressure Poisson equation (PPE) along with enhanced MPS schemes from previous studies.

JOURNAL OF COMPUTATIONAL PHYSICS (2021)

添加到收藏夹

Article Energy & Fuels

CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace

Shuai Wang et al.

Summary: A CFD-DEM reacting model with thermochemical sub-models was developed to study gas-solid reacting flow in an ironmaking blast furnace. Simulation results indicated significant impacts of key operating parameters on raceway evolution, affecting cavity depth and CO production.

FUEL (2021)

添加到收藏夹

Article Engineering, Environmental

Development of a robust Eulerian-Lagrangian model for the simulation of an industrial solid-fluid system

Yuki Mori et al.

Summary: This study investigates the stability issue in the DEM-CFD method, proposes a new implicit algorithm to address the instability problem of the drag force term, and conducts verification tests to demonstrate its accuracy and stability.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM modelling of the migration of fines in suspension flow through a solid packed bed

Zhouzun Xie et al.

Summary: In this work, a smoothed volume distribution model (SVDM) was developed to simulate the migration of fines in suspension flow through a solid packed bed based on the unresolved CFD-DEM framework. The SVDM method allows a high-resolution mesh and can achieve a high efficiency and applicability compared to the DPVM method. The effects of inlet fine concentration and solid/fine size ratio on fines migration behavior were also studied, revealing insights into fine powder holdup and migration mechanisms.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Numerical analysis of the nonlinear free surface flow around an advancing ship using moving particle semi-implicit method

CholJun Pak et al.

Summary: This paper presents a methodology to simulate the nonlinear free surface flow around an advancing ship, based on the Moving Particle Semi-implicit (MPS) method. The modified MPS method with newly proposed treatment techniques demonstrates effective application in marine engineering for simulating the flow around an advancing ship.

AIP ADVANCES (2021)

添加到收藏夹

Article Engineering, Chemical

Coarse-grained CFD-DEM simulation to determine the multiscale characteristics of the air dense medium fluidized bed

Ying Jia et al.

Summary: This study utilized a coarse-grained CFD-DEM method to analyze the bed expansion rates and solid concentration in ADMFB, and evaluated the microscale and mesoscale behaviors of ADMFB through power spectrum density and wavelet decomposition. The research found that pressure fluctuation mainly resulted from bubbles motion of mesoscale rather than from particles motion of microscale and global bed expansion of macroscale.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Particle-scale modelling of raceway dynamics in a blast furnace using a smoothing method

Shuai Wang et al.

Summary: This study presents a smoothing method to effectively simulate the lateral high-speed gas injection into a packed bed, forming a raceway cavity under high Reynolds number gas flow and narrow orifice conditions. The method successfully captures a plume-like raceway and proposes the boundary and volume of the cavity as two criteria for quantitatively assessing the raceway profile.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Simulations of biomass pyrolysis using glued-sphere CFD-DEM with 3-D intra-particle models

Liqiang Lu et al.

Summary: This research utilized a glued-sphere computational fluid dynamic discrete element method to investigate the effects of biomass particle shapes and sizes on pyrolysis. The study revealed significant influences of surface areas and mass distributions on interphase heat transfer and chemical reactions, with neglectable intra-particle heat transfer for certain conditions. Different reactor types were simulated to analyze conversion distributions, showing the best balance between uniform and fast conversion in the fluidized bed.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Chemical

Particle-scale study of heat and mass transfer in a bubbling fluidised bed

Shuai Wang et al.

Summary: This study simulated the multiphase flow and thermochemical behaviors of char combustion in a bubbling fluidized bed using the CFD-DEM approach. By validating the model and examining heat transfer contributions, the study revealed the particle-scale behaviors of char and sand in the system.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3D gradient corrected SPH for fully resolved particle-fluid interactions

Johannes C. Joubert et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Engineering, Chemical

Comprehensive experimental investigation on biomass-glass beads binary fluidization: A data set for CFD model validation

Xi Gao et al.

AICHE JOURNAL (2020)

添加到收藏夹

Article Engineering, Chemical

Coarse-grained DEM study of solids sedimentation in water

Zhouzun Xie et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Novel Porous Draft Tube To Manipulate Fluid Throughput from Spout to Annulus in a Spouted Bed

Palash Kumar Mollick et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM study of coke combustion in the raceway cavity of an ironmaking blast furnace

Jiaxin Cui et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM coupled with thermochemical sub-models for biomass gasification: Validation and sensitivity analysis

Shuai Wang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Experimental Investigation of Spout Deflection in a Rectangular Spouted Bed by the PIV Method

Yuanhe Yue et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

CFD-DEM study of biomass gasification in a fluidized bed reactor: Effects of key operating parameters

Shuai Wang et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM simulation of fine particles in a spouted bed apparatus with a Wurster tube

Paul Breuninger et al.

PARTICUOLOGY (2019)

添加到收藏夹

Article Nuclear Science & Technology

A novel multiphase MPS algorithm for modeling crust formation by highly viscous fluid for simulating corium spreading

Guangtao Duan et al.

NUCLEAR ENGINEERING AND DESIGN (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An ALE pairwise-relaxing meshless method for compressible flows

Xiaoxing Liu et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2019)

添加到收藏夹

Article Engineering, Chemical

Particle-scale study of spout deflection in a flat-bottomed spout fluidized bed

Yuanhe Yue et al.

CHEMICAL ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

Particle-Scale Study of the Effect of Operating Conditions on Spout Deflection Behavior in a Flat-Bottomed Spout-Fluidized Bed

Yuanhe Yue et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM simulation of a conical spouted bed with open-sided draft tube containing fine particles

Bayazid Mahmoodi et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM simulation of raceway formation in an ironmaking blast furnace

Zhen Miao et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Chemical

Fountain confined conical spouted beds

Haritz Altzibar et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Stable multiphase moving particle semi-implicit method for incompressible interfacial flow

Guangtao Duan et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Chemical

Assessment of polydisperse drag models for the size segregation in a bubbling fluidized bed using discrete particle method

Yong Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Environmental

CFD-DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Engineering, Chemical

Characterization and CFD-DEM modelling of a prismatic spouted bed

Vitalij Salikov et al.

POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Chemical

Flow regime transition and hydrodynamics of spouted beds with binary mixtures

Wei Du et al.

POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Chemical

Slot-Rectangular Spouted Bed: Hydrodynamic Stability and Effects of Operating Conditions on Drying Performance

Matheus B. Braga et al.

DRYING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Environmental

Influences of operating parameters on the hydrodynamics of a 3-D spout-fluid bed based on DEM modeling approach

Shiliang Yang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Engineering, Chemical

Pilot scale conical spouted bed pyrolysis reactor: Draft tube selection and hydrodynamic performance

Jon Makibar et al.

POWDER TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Chemical

DEM simulation of particle mixing in flat-bottom spout-fluid bed

Yong Zhang et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2010)

添加到收藏夹

Article Engineering, Chemical

Large-scale discrete element modeling in pneumatic conveying

Mikio Sakai et al.

CHEMICAL ENGINEERING SCIENCE (2009)

添加到收藏夹

Article Engineering, Chemical

PEPT and discrete particle simulation study of spout-fluid bed regimes

J. M. Link et al.

AICHE JOURNAL (2008)

添加到收藏夹

Article Energy & Fuels

Flow pattern and transition of rectangular spout-fluid bed

Wenqi Zhong et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2006)

添加到收藏夹

Article Engineering, Chemical

DEM simulation of gas-solid flow behaviors in spout-fluid bed

WQ Zhong et al.

CHEMICAL ENGINEERING SCIENCE (2006)

添加到收藏夹

Article Engineering, Chemical

Effects of operating conditions on the quality of mango pulp dried in a spout fluidized bed

RL da Cunha et al.

DRYING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Chemical

Flow regimes in a spout-fluid bed: A combined experimental and simulation study

JM Link et al.

CHEMICAL ENGINEERING SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.