相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Investigation on gas-solid flow behavior in a multistage fluidized bed by using numerical simulation
Gongpeng Wu et al.
POWDER TECHNOLOGY (2020)
Gas-solid flow behaviors in a multi-stage circulating fluidized bed under elevated pressure
Feng Rongtao et al.
CHEMICAL ENGINEERING SCIENCE (2019)
CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed
K. Chen et al.
POWDER TECHNOLOGY (2019)
Numerical investigation of the back-mixing and non-uniform characteristics in the three-dimensional full-loop circulating fluidized bed combustor with six parallel cyclones
Shiliang Yang et al.
APPLIED THERMAL ENGINEERING (2019)
Model analysis of gas residence time in an ironmaking blast furnace
Xiaobing Yu et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Two- and three-dimensional hydrodynamic modeling of a pseudo-2D turbulent fluidized bed with Geldart B particle
Jian Chang et al.
POWDER TECHNOLOGY (2019)
Hydrodynamics of activated char in a novel multistage circulating fluidized bed for dry desulfurization
Gongpeng Wu et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Core-Annulus radial solids concentration distribution in riser
Yiping Fan et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Residence time distribution of particles in circulating fluidized bed risers
Leina Hua et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Lateral solids meso-mixing in pseudo-2D fluidized beds by means of TFM simulations
F. Hernandez-Jimenez et al.
POWDER TECHNOLOGY (2018)
Modeling multiple gas jet interactions during fluidization in a pseudo-2D bed
Santhip K. Kanholy et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Hydrodynamic and solids residence time distribution in a binary bubbling fluidized bed: 3D computational study coupled with the structure-based drag model
Zheng Zou et al.
CHEMICAL ENGINEERING JOURNAL (2017)
A pseudo-3D model with 3D accuracy and 2D cost for the CFD-PBM simulation of a pilot-scale rotating disc contactor
Hang Chen et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Experimental and numerical study of pseudo-2D circulating fluidized beds
Adam Klimanek et al.
PARTICUOLOGY (2016)
A 2.5D computational method to simulate cylindrical fluidized beds
Tingwen Li et al.
CHEMICAL ENGINEERING SCIENCE (2015)
CFD study on solids flow pattern and solids mixing characteristics in bubbling fluidized bed: Effect of fluidization velocity and bed aspect ratio
Maryam Askarishahi et al.
POWDER TECHNOLOGY (2015)
Axial solids flow structure in a high density gas-solids circulating fluidized bed downer
Chengxiu Wang et al.
POWDER TECHNOLOGY (2015)
Validation of a 2.5D CFD model for cylindrical gas-solids fluidized beds
Tingwen Li
POWDER TECHNOLOGY (2015)
The effect of frictional pressure, geometry and wall friction on the modelling of a pseudo-2D bubbling fluidised bed reactor
Schalk Cloete et al.
POWDER TECHNOLOGY (2015)
Hydrodynamics studies of a pseudo 2D rectangular spouted bed by CFD
Seyyed Hossein Hosseini et al.
POWDER TECHNOLOGY (2015)
Influence of tube configuration on the gas-solid hydrodynamics of an internally circulating fluidized bed: A discrete element study
Shiliang Yang et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Flow regime identification in a novel circulating-turbulent fluidized bed
Qiang Geng et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Hydrodynamics and catalytic reaction inside a novel multi-regime riser
Xiaolin Zhu et al.
CHEMICAL ENGINEERING JOURNAL (2014)
CFD simulation of solids residence time distribution in a CFB riser
Leina Hua et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Comparative study of gas-solids flow patterns inside novel multi-regime riser and conventional riser
Xiaolin Zhu et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Solids residence time distribution in the secondary reactor of a dual circulating fluidized bed system
Diana Carolina Guio-Perez et al.
CHEMICAL ENGINEERING SCIENCE (2013)
A CFD study of gas-solid jet in a CFB riser flow
Tingwen Li et al.
AICHE JOURNAL (2012)
Detailed hydrodynamics of high flux gas-solid flow in a circulating turbulent fluidized bed
Maozhan Qi et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Axial gas and solids mixing in a down flow circulating fluidized bed reactor based on CFD simulation
Parinya Khongprom et al.
CHEMICAL ENGINEERING SCIENCE (2012)
A review of the Residence Time Distribution (RTD) applications in solid unit operations
Yijie Gao et al.
POWDER TECHNOLOGY (2012)
Numerical Simulation of Hydrodynamics and Cracking Reactions in the Feed Mixing Zone of a Multiregime Gas-Solid Riser Reactor
Jieqing Gan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
The solids flow in the CFB-riser quantified by single radioactive particle tracking
Shiva Mahmoudi et al.
POWDER TECHNOLOGY (2011)
Demarcation of a New Circulating Turbulent Fluidization Regime
Xiaobo Qi et al.
AICHE JOURNAL (2009)
Hydrodynamic and solid residence time distribution in a circulating fluidized bed: Experimental and 3D computational study
Regis Andreux et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2008)
Comparative study of flow structures in a circulating-turbulent fluidized bed
Haiyan Zhu et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Velocity fluctuation interpretation in the near wall region of a dense riser
Ronald W. Breault et al.
POWDER TECHNOLOGY (2008)
Experimental study of the solids velocity field in gas-solid risers
S Bhusarapu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
The influence of the riser exit on the particle residence time distribution in a circulating fluidised bed riser
AT Harris et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Particle residence time distributions in circulating fluidised beds
AT Harris et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Principles of a novel multistage circulating fluidized bed reactor for biomass gasification
SRA Kersten et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Overall solids movement and solids residence time distribution in a CFB-riser
K Smolders et al.
CHEMICAL ENGINEERING SCIENCE (2000)
分享论文
